74F64PC

Revised March 1999 74F64 4-2-3-2-Input AND-OR-Invert Gate General Description This device contains gates configured to perform a 4-2-3-2 input AND-OR-INVERT function. Ordering Code: Order Number Package Number Package Description 74F64SC M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150 Narrow 74F64SJ M14D 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 74F64PC N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Logic Symbol Connection Diagram IEEE/IEC Unit Loading/Fan Out Pin Names U.L. Input IIH/IIL HIGH/LOW Output IOH/IOL Description An, Bn, Cn, Dn Inputs 1.0/1.0 20 µA/−0.6 mA O Output 50/33.3 −1 mA/20 mA © 1999 Fairchild Semiconductor Corporation DS009467.prf www.fairchildsemi.com 74F64 4-2-3-2-Input AND-OR-Invert Gate April 1988 74F64 Absolute Maximum Ratings(Note 1) Recommended Operating Conditions Storage Temperature −65°C to +150°C Ambient Temperature under Bias −55°C to +125°C Free Air Ambient Temperature Junction Temperature under Bias −55°C to +150°C Supply Voltage 0°C to +70°C +4.5V to +5.5V −0.5V to +7.0V VCC Pin Potential to Ground Pin Input Voltage (Note 2) −0.5V to +7.0V Input Current (Note 2) −30 mA to +5.0 mA Voltage Applied to Output in HIGH State (with VCC = 0V) Standard Output −0.5V to VCC 3-STATE Output −0.5V to +5.5V Note 1: Absolute maximum ratings are values beyond which the device may be damaged or have its useful life impaired. Functional operation under these conditions is not implied. Note 2: Either voltage limit or current limit is sufficient to protect inputs. Current Applied to Output twice the rated IOL (mA) in LOW State (Max) DC Electrical Characteristics Symbol Parameter VCC Units Conditions VIH Input HIGH Voltage V VIL Input LOW Voltage V VCD Input Clamp Diode Voltage V Min IIN = −18 mA VOH Output HIGH V Min IOH = −1 mA V Min IOL = 20 mA µA Max VIN = 2.7V µA Max VIN = 7.0V 10% VCC Voltage 5% VCC VOL Output LOW Voltage 10% VCC IIH Input HIGH Recognized as a HIGH Signal Recognized as a LOW Signal IOH = −1 mA Current IBVI Input HIGH Current Breakdown Test ICEX Output High Leakage Current µA Max VOUT = VCC VID Input Leakage V 0.0 IID = 1.9 µA µA 0.0 VIOD = 150 mV Test IOD All Other Pins Grounded Output Leakage Circuit Current All Other Pins Grounded VIN = 0.5V IIL Input LOW Current mA Max IOS Output Short-Circuit Current mA Max VOUT = 0V ICCH Power Supply Current mA Max VO = HIGH ICCL Power Supply Current mA Max VO = LOW AC Electrical Characteristics Symbol Parameter TA = +25°C TA = 0° to +70°C VCC = +5.0V CL = 50 pF CL = 50 pF Min Typ Max Min Max tPLH Propagation Delay 2.5 4.6 6.5 2.5 7.5 tPHL An, Bn, Cn, Dn to O 1.5 3.2 4.5 1.5 5.5 www.fairchildsemi.com 2 Units ns 74F64 Physical Dimensions inches (millimeters) unless otherwise noted 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150 Narrow Package Number M14A 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M14D 3 www.fairchildsemi.com 74F64 4-2-3-2-Input AND-OR-Invert Gate Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Package Number N14A LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support 1. Life support devices or systems are devices or systems device or system whose failure to perform can be reawhich, (a) are intended for surgical implant into the sonably expected to cause the failure of the life support body, or (b) support or sustain life, and (c) whose failure device or system, or to affect its safety or effectiveness. to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the www.fairchildsemi.com user. Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications.