Is Now Part of
To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
Revised April 2005
74LVX244
Low Voltage Octal Buffer/Line Driver with
3-STATE Outputs
General Description
Features
The LVX244 is an octal non-inverting buffer and line driver
designed to be employed as a memory address driver,
clock driver and bus oriented transmitter or receiver which
provides improved PC board density. The inputs tolerate up
to 7V allowing interface of 5V systems to 3V systems.
■ Input voltage translation from 5V to 3V
■ Ideal for low power/low noise 3.3V applications
■ Guaranteed simultaneous switching noise level and
dynamic threshold performance
Ordering Code:
Order Number
Package Number
74LVX244M
74LVX244SJ
74LVX244MTC
Package Description
M20B
20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide
M20D
Pb-Free 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
MTC20
20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
Devices also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code.
Pb-Free package per JEDEC J-STD-020B.
Pin Descriptions
Logic Symbol
IEEE/IEC
Pin Names
Description
OE1, OE2
3-STATE Output Enable Inputs
I0–I7
Inputs
O0–O7
Outputs
Truth Tables
Inputs
Connection Diagram
Outputs
In
OE1
L
L
L
L
H
H
H
X
Z
Inputs
H
X
© 2005 Fairchild Semiconductor Corporation
DS011552
(Pins 12, 14, 16, 18)
Outputs
OE2
In
L
L
L
L
H
H
H
X
HIGH Voltage Level
Immaterial
(Pins 3, 5, 7, 9)
Z
L LOW Voltage Level
Z High Impedance
www.fairchildsemi.com
74LVX244 Low Voltage Octal Buffer/Line Driver with 3-STATE Outputs
February 1993
74LVX244
Absolute Maximum Ratings(Note 1)
Recommended Operating
Conditions (Note 2)
0.5V to 7.0V
Supply Voltage (VCC)
DC Input Diode Current (IIK)
VI
Supply Voltage (VCC)
0.5V
20 mA
0.5V to 7V
DC Input Voltage (VI)
VO
0V to 5.5V
Output Voltage (Vo)
DC Output Diode Current (IOK)
VO
2.0V to 3.6V
Input Voltage (VI)
0V to VCC
40qC to 85qC
Operating Temperature (TA)
0.5V
VCC 0.5V
20 mA
20 mA
0.5V to VCC 0.5V
DC Output Voltage (VO)
Input Rise and Fall Time ('t/'V)
Note 1: The “Absolute Maximum Ratings” are those values beyond which
the safety of the device cannot be guaranteed. The device should not be
operated at these limits. The parametric values defined in the Electrical
Characteristics tables are not guaranteed at the absolute maximum ratings.
The “Recommended Operating Conditions” table will define the conditions
for actual device operation.
DC Output Source
r25 mA
or Sink Current (IO)
DC VCC or Ground Current
r75 mA
65qC to 150qC
(ICC or IGND)
Storage Temperature (TSTG)
Power Dissipation
0 ns/V to 100 ns/V
Note 2: Unused inputs must be held HIGH or LOW. They may not float.
180 mW
DC Electrical Characteristics
Symbol
VIH
VIL
VOH
VOL
IOZ
Parameter
TA
VCC
Min
25qC
TA
Typ
Max
40qC to 85qC
Min
HIGH Level Input
2.0
1.5
1.5
Voltage
3.0
2.0
2.0
3.6
2.4
2.4
2.0
0.5
0.5
Voltage
3.0
0.8
0.8
3.6
0.8
0.8
2.0
1.9
2.0
1.9
Voltage
3.0
2.9
3.0
2.9
3.0
2.58
V
VIN
VIH or VIL IOH
50 PA
IOH
50 PA
V
2.48
LOW Level Output
2.0
0.0
Voltage
3.0
0.0
3-STATE Output
Conditions
V
LOW Level Input
HIGH Level Output
Units
Max
IOH
0.1
0.1
VIN
0.1
0.1
3.0
0.36
0.44
3.6
r0.25
r2.5
PA
VIN
50 PA
IOL
50 PA
IOL
4 mA
V
Off-State Current
VOUT
VIH or VIL
VCC or GND
IIN
Input Leakage Current
3.6
r0.1
r1.0
PA
VIN
5.5V or GND
ICC
Quiescent Supply Current
3.6
4.0
40.0
PA
VIN
VCC or GND
Noise Characteristics
Symbol
(Note 3)
VCC
Parameter
(V)
TA
Typ
25qC
Units
CL (pF)
50
Limit
VOLP
Quiet Output Maximum Dynamic VOL
3.3
0.5
0.8
V
VOLV
Quiet Output Minimum Dynamic VOL
3.3
0.5
0.8
V
50
VIHD
Minimum HIGH Level Dynamic Input Voltage
3.3
2.0
V
50
VILD
Maximum LOW Level Dynamic Input Voltage
3.3
0.8
V
50
Note 3: Input tr
tf
3 ns
www.fairchildsemi.com
2
4 mA
VIH or VIL IOL
74LVX244
AC Electrical Characteristics
Symbol
VCC
Parameter
tPLH
Propagation Delay
tPHL
Time
(V)
TA
Min
2.7
3.3 r 0.3
tPZL
3-STATE Output
tPZH
Enable Time
2.7
25qC
Max
Min
Max
6.1
11.4
1.0
13.5
8.6
14.9
1.0
17.0
4.7
7.1
1.0
8.5
7.2
10.6
1.0
7.1
13.8
1.0
9.6
3.3 r 0.3
40qC to 85qC
TA
Typ
17.3
5.5
8.8
8.0
12.3
1.0
50 pF
15 pF
12.0
CL
50 pF
16.5
CL
15 pF,
RL
1 k:
CL
50 pF,
RL
1 k:
CL
15 pF,
RL
1 k:
CL
50 pF,
RL
1 k:
CL
50 pF,
RL
1 k:
CL
50 pF
ns
20.0
1.0
10.5
1.0
15 pF
CL
ns
14.0
3-STATE Output
2.7
11.6
16.0
1.0
19.0
tPHZ
Disable Time
3.3 r 0.3
9.7
11.4
1.0
13.0
tOSLH
Output to Output
2.7
1.5
1.5
tOSHL
Skew (Note 4)
3.3
1.5
1.5
|tPLHm tPLHn|, tOSHL
Conditions
CL
CL
tPLZ
Note 4: Parameter guaranteed by design. tOSLH
Units
ns
ns
|t PHLm t PHLn|
Capacitance
Symbol
TA
Parameter
Min
25qC
TA 40qC to 85qC
Typ
Max
10
Min
Max
10
Units
CIN
Input Capacitance
4
COUT
Output Capacitance
6
pF
pF
CPD
Power Dissipation Capacitance (Note 5)
19
pF
Note 5: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load.
3
www.fairchildsemi.com
74LVX244
Physical Dimensions inches (millimeters) unless otherwise noted
20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide
Package Number M20B
www.fairchildsemi.com
4
74LVX244
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
Pb-Free 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
Package Number M20D
5
www.fairchildsemi.com
74LVX244 Low Voltage Octal Buffer/Line Driver with 3-STATE Outputs
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)
20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
Package Number MTC20
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
2. A critical component in any component of a life support
device or system whose failure to perform can be reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the
user.
www.fairchildsemi.com
www.fairchildsemi.com
6
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
© Semiconductor Components Industries, LLC
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
1
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
www.onsemi.com