AR0238CSSC12SHRA0-DP2

DATA SHEET www.onsemi.com AR0238: 1/2.7-Inch 2.1 Mp/Full HD Digital Image Sensor Features • Superior Low−light Performance • Latest 3.0 mm Pixel with onsemi DR−Pix™ Technology with Dual Conversion Gain • Full HD Support at up to 1080P 60 fps for AR0238 • • General Description onsemi’s AR0238 is a 1/2.7-inch CMOS digital image sensor with an active−pixel array of 1928Hx1088V. It captures images in either linear or high dynamic range modes, with a rolling−shutter readout. It includes sophisticated camera functions such as in−pixel binning, windowing and both video and single frame modes. It is designed for both low light and high dynamic range scene performance. It is programmable through a simple two−wire serial interface. The AR0238 produces extraordinarily clear, sharp digital pictures, and its ability to capture both continuous video and single frames makes it the perfect choice for a wide range of applications, including surveillance and HD video. • • • • • • • Table 1. KEY PARAMETERS Parameter • • Typical Value Superior Video Performance Linear or High Dynamic Range Capture Supports Line Interleaved T1/T2 readout to Enable HDR Processing in ISP Chip Support for External Mechanical Shutter On−chip Phase−locked Loop (PLL) Oscillator Integrated Position−based Color and Lens Shading Correction Slave Mode for Precise Frame−rate Control Stereo/3D Camera Support Statistics Engine Data Interfaces: Four−lane Serial High− speed Pixel Interface (HiSPi) Differential Signaling (SLVS and HiVCM), or Parallel Auto Black Level Calibration High−speed Configurable Context Switching Temperature Sensor Optical format 1/2.7−inch (6.6 mm) Active pixels 1928(H) x 1088(V) (16:9 mode) Pixel size 3.0 mm x 3.0 mm • Color filter array RGB Bayer, RGB−IR Applications Shutter type Electronic rolling shutter and GRR Input clock range 6 − 48 MHz Output clock maximum 148.5 Mp/s (4−lane HiSPi) 74.25 Mp/s (Parallel) Output Serial HiSPi 10−, or 12−bit Parallel 10−, or 12−bit 1080p 60 fps Linear HiSPi 30 fps Linear Parallel 30 fps Line Interleaved HiSPi 15 fps Line Interleaved Parallel Frame rate Responsivity 4.0 V/lux−sec SNRMAX 41 dB Max Dynamic range Up to 96 dB Supply voltage I/O 1.8 or 2.8 V Digital 1.8 V Analog 2.8 V HiSPi 0.3 V − 0.6 V (SLVS), 1.7 V − 1.9 V (HiVcm) Power consumption (typical) Operating temperature Package options < 300 mW Line interleaved 1080p30