AR0331SRSC00SHCA0-DRBR1

DATA SHEET www.onsemi.com AR0331 1/3-Inch 3.1 Mp/Full HD Digital Image Sensor AR0331 ILCC48 10x10 CASE 847AG General Description The onsemi AR0331 is a 1/3−inch CMOS digital image sensor with an active−pixel array of 2048 (H) x 1536 (V). It captures images in either linear or high dynamic range modes, with a rolling−shutter readout. It includes sophisticated camera functions such as in−pixel binning, windowing and both video and single frame modes. It is designed for both low light and high dynamic range scene performance. It is programmable through a simple two−wire serial interface. The AR0331 produces extraordinarily clear, sharp digital pictures, and its ability to capture both continuous video and single frames makes it the perfect choice for a wide range of applications, including surveillance and HD video. The onsemi AR0331 can be operated in its default mode or programmed for frame size, exposure, gain, and other parameters. The default mode output is a 1080p−resolution image at 60 frames per second (fps). In linear mode, it outputs 12−bit or 10−bit A−Law compressed raw data, using either the parallel or serial (HiSPi) output ports. In high dynamic range mode, it outputs 12−bit compressed data using parallel output. In HiSPi mode, 12− or 14−bit compressed, or 16−bit linearized data may be output. The device may be operated in video (master) mode or in single frame trigger mode. FRAME_VALID and LINE_VALID signals are output on dedicated pins, along with a synchronized pixel clock in parallel mode. The AR0331 includes additional features to allow application− specific tuning: windowing and offset, auto black level correction, and on−board temperature sensor. Optional register information and histogram statistic information can be embedded in the first and last 2 lines of the image frame. The sensor is designed to operate in a wide temperature range (–30°C to +85°C). IBGA52 9x9 CASE 503AA ORDERING INFORMATION See detailed ordering and shipping information on page 2 of this data sheet. • Statistics Engine • Data Interfaces: Four−lane Serial High− • • • speed Pixel Interface (HiSPi) Differential Signaling (SLVS and HiVCM), or Parallel Auto Black Level Calibration High−speed Context Switching Temperature Sensor Applications • • • • • • • Video Surveillance Stereo Vision Smart Vision Automation Machine Vision 1080p60 Video Applications High Dynamic Range Imaging Features • • • • • • • • • • • • • • Superior Low−light Performance Latest 2.2 mm Pixel with onsemi A−Pix™ Technology Full HD Support at 1080 P 60 fps for Superior Video Performance Linear or High Dynamic Range Capture 3.1 M (4:3) and 1080 P Full HD (16:9) Images Optional Adaptive Local Tone Mapping (ALTM) Interleaved T1/T2 Output Support for External Mechanical Shutter Support for External LED or Xenon Flash Slow−motion Video (VGA 120 fps) On−chip Phase−locked Loop (PLL) Oscillator Integrated Position−based Color and Lens Shading Correction Slave Mode for Precise Frame−rate Control Stereo/3D Camera Support © Semiconductor Components Industries, LLC, 2011 May, 2022 − Rev. 15 1 Publication Order Number: AR0331/D AR0331 Table 1. KEY PARAMETERS Parameter Typical Value Optical Format 1/3−inch (5.8 mm) Note: Sensor optical format will also work with lenses designed for 1/3.2” format. Active Pixels 2048 (H) x 1536 (V) (4:3, mode) Pixel Size 2.2 mm x 2.2 mm Color Filter Array RGB Bayer Shutter Type Electronic rolling shutter and GRR Input Clock Range 6 – 48 MHz Output Clock Maximum 148.5 Mp/s (4−lane HiSPi) 74.25 Mp/s (Parallel) Output Frame Rate Serial HiSPi 10−, 12−, 14−, or 16−bit Parallel 10−, 12−bit Full Resolution 30 fps 1080p 60 fps Responsivity 1.9 V/lux−sec SNRMAX 39 dB Max Dynamic Range Up to 100 dB Supply Voltage I/O 1.8 or 2.8 V Digital 1.8 V Analog 2.8 V HiSPi 0.3 V−0.6 V, 1.7 V−1.9 V Power Consumption (Typical)