BAS20H
High Voltage
Switching Diode
Features
• S Prefix for Automotive and Other Applications Requiring Unique
•
Site and Control Change Requirements; AEC−Q101 Qualified and
PPAP Capable
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
VR
200
Vdc
VRRM
200
Vdc
Continuous Forward Current
IF
200
mAdc
Peak Forward Surge Current
IFM(surge)
625
mAdc
Repetitive Peak Forward Current
(Pulse Wave = 1 sec, Duty Cycle = 66%)
IFRM
500
mA
Non−Repetitive Peak Forward Current
(Square Wave, TJ = 25°C prior to surge)
t = 1 ms
t = 1 ms
t=1s
IFSM
Continuous Reverse Voltage
Repetitive Peak Reverse Voltage
www.onsemi.com
HIGH VOLTAGE
SWITCHING DIODE
1
CATHODE
2
A
5.0
2.0
0.5
1
SOD−323
CASE 477
STYLE 1
THERMAL CHARACTERISTICS
Characteristic
Total Device Dissipation FR−5 Board*
TA = 25°C
Derate above 25°C
Symbol
Max
Unit
200
1.57
mW
mW/°C
PD
Thermal Resistance Junction−to−Ambient
RqJA
635
°C/W
Junction and Storage Temperature Range
TJ, Tstg
−55 to
+150
°C
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
*FR−5 Minimum Pad
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
Characteristic
2
ANODE
Symbol
Min
Max
Unit
MARKING DIAGRAM
JR M G
G
JR = Specific Device Code
M = Date Code*
G = Pb−Free Package
(Note: Microdot may be in either location)
*Date Code orientation may vary depending upon
manufacturing location.
OFF CHARACTERISTICS
Reverse Voltage Leakage Current
(VR = 200 Vdc)
(VR = 200 Vdc, TJ = 150°C)
Reverse Breakdown Voltage
(IBR = 100 mAdc)
ORDERING INFORMATION
IR
−
−
1.0
100
mAdc
250
−
Vdc
−
−
1000
1250
mV
V(BR)
Forward Voltage
(IF = 100 mAdc)
(IF = 200 mAdc)
VF
Diode Capacitance
(VR = 0, f = 1.0 MHz)
CD
−
5.0
pF
Reverse Recovery Time
(IF = IR = 30 mAdc, RL = 100 W)
trr
−
50
ns
© Semiconductor Components Industries, LLC, 2014
December, 2014 − Rev. 7
1
Device
Package
Shipping†
BAS20HT1G
SOD−323
(Pb−Free)
3000 / Tape & Reel
SBAS20HT1G
SOD−323
(Pb−Free)
3000 / Tape & Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
Publication Order Number:
BAS20HT1/D
BAS20H
820 W
+10 V
2.0 k
100 mH
tr
0.1 mF
IF
tp
IF
t
trr
10%
t
0.1 mF
90%
D.U.T.
50 W Input
Sampling
Oscilloscope
50 W Output
Pulse
Generator
iR(REC) = 3.0 mA
IR
VR
OUTPUT PULSE
(IF = IR = 30 mA; MEASURED
at iR(REC) = 3.0 mA)
INPUT SIGNAL
Notes: 1. A 2.0 kW variable resistor adjusted for a Forward Current (IF) of 30 mA.
Notes: 2. Input pulse is adjusted so IR(peak) is equal to 30 mA.
Notes: 3. tp » trr
Figure 1. Recovery Time Equivalent Test Circuit
100
I R, REVERSE CURRENT (m A)
100
55°C
10
125°C
25°C
1.0
150°C
−40°C
0.1
150°C
125°C
55°C
10
1.0
25°C
0.1
0.01
−40°C
0.001
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
0
50
100
150
200
VF, FORWARD VOLTAGE (V)
VR, REVERSE VOLTAGE (V)
Figure 2. Forward Current
Figure 3. Leakage Current
2.0
C T , TOTAL CAPACITANCE (pF)
IF , FORWARD CURRENT (mA)
1000
1.8
1.6
f = 1 MHz
1.4
IE = 0 A
TA = 25°C
1.2
1.0
0.8
0.6
0.4
0.2
0
0
5.0
10
15
20
25
VR, REVERSE VOLTAGE (V)
Figure 4. Total Capacitance
www.onsemi.com
2
30
35
250
300
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
2
1
STYLE 1
SOD−323
CASE 477−02
ISSUE H
2
SCALE 4:1
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. LEAD THICKNESS SPECIFIED PER L/F DRAWING
WITH SOLDER PLATING.
4. DIMENSIONS A AND B DO NOT INCLUDE MOLD
FLASH, PROTRUSIONS OR GATE BURRS.
5. DIMENSION L IS MEASURED FROM END OF RADIUS.
HE
D
b
1
2
E
A3
A
C
NOTE 3
DATE 13 MAR 2007
1
STYLE 2
L
A1
NOTE 5
MILLIMETERS
DIM MIN
NOM MAX
A
0.80
0.90
1.00
A1 0.00
0.05
0.10
A3
0.15 REF
b
0.25
0.32
0.4
C 0.089
0.12 0.177
D
1.60
1.70
1.80
E
1.15
1.25
1.35
L
0.08
HE
2.30
2.50
2.70
INCHES
NOM MAX
0.035 0.040
0.002 0.004
0.006 REF
0.010 0.012 0.016
0.003 0.005 0.007
0.062 0.066 0.070
0.045 0.049 0.053
0.003
0.090 0.098 0.105
MIN
0.031
0.000
GENERIC
MARKING DIAGRAM*
SOLDERING FOOTPRINT*
XX M
0.63
0.025
STYLE 1
0.83
0.033
*This information is generic. Please refer to
device data sheet for actual part marking.
Pb−Free indicator, “G” or microdot “ G”,
may or may not be present.
2.85
0.112
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
DESCRIPTION:
98ASB17533C
SOD−323
STYLE 2
XX = Specific Device Code
M = Date Code
1.60
0.063
DOCUMENT NUMBER:
XX M
STYLE 1:
PIN 1. CATHODE (POLARITY BAND)
2. ANODE
STYLE 2:
NO POLARITY
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
onsemi Website: www.onsemi.com
◊
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative