BC558

DATA SHEET www.onsemi.com PNP Epitaxial Silicon Transistor TO−92−3 CASE 135AN BC556, BC557, BC558, BC559, BC560 12 Straight Lead Bulk Packing 3 Features • • • • • Switching and Amplifier High−Voltage: BC556, VCEO = −65 V Low−Noise: BC559, BC560 Complement to BC546, BC547, BC548, BC549, and BC550 These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant TO−92−3 CASE 135AR 1 2 Bent Lead Tape & Reel Fan−Fold 3 1. Collector 2. Base 3. Emitter ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise noted) Parameter Symbol Collector - Base Voltage Value Unit VCBO BC556 BC557 / BC560 BC558 / BC559 −80 −50 −30 Collector - Emitter Voltage VCEO BC556 BC557 / BC560 BC558 / BC559 MARKING DIAGRAM V V ABC 5xxx YWW −65 −45 −30 Emitter - Base Voltage VEBO −5 V Collector Current (DC) IC −100 mA Peak Collector Current (Pulse) ICP −200 mA Peak Base Current (Pulse) IBP −200 mA Junction Temperature TJ 150 °C TSTG −65 to +150 °C Storage Temperature Range Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. A = Assembly Location BC5xxx = Specific Device Code xxx = 56A, 56B, 57A, 57B, 58B, 59B, 59C, 60C Y = Year WW = Work Week ORDERING INFORMATION See detailed ordering and shipping information on page 2 of this data sheet. THERMAL CHARACTERISTICS (Note 1) (TA = 25°C unless otherwise noted) Parameter Total Device Dissipation Derate above 25°C Thermal Resistance, Junction−to−Ambient Symbol Max. Unit PD 500 4.0 mW mW/°C RqJA 250 °C/W 1. PCB size: FR−4, 76 mm x 114 mm x 1.57 mm (3.0 inch x 4.5 inch x 0.062 inch) with minimum land pattern size. © Semiconductor Components Industries, LLC, 2002 December, 2021 − Rev. 2 1 Publication Order Number: BC556BTA/D BC556, BC557, BC558, BC559, BC560 ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Symbol Parameter Conditions Min. Typ. Max. Unit −15 nA ICBO Collector Cut−Off Current VCB = −30 V, IE = 0 hFE DC Current Gain VCE = −5 V, IC = −2 mA Collector−Emitter Saturation Voltage IC = −10 mA, IB = −0.5 mA −90 −300 IC = −100 mA, IB = −5 mA −250 −650 IC = −10 mA, IB = −0.5 mA −700 IC = −100 mA, IB = −5 mA −900 VCE(sat) VBE(sat) VBE(on) Collector−Base Saturation Voltage Base−Emitter On Voltage 110 VCE = −5 V, IC = −2 mA −600 800 −660 VCE = −5 V, IC = −10 mA fT mV mV −750 mV −800 Current Gain Bandwidth Product VCE = −5 V, IC = −10 mA, f = 10 MHz Cob Output Capacitance VCB = −10 V, IE = 0, f = 1 MHz 6 pF NF Noise Figure VCE = −5 V, IC = −200 mA, f = 1 kHz, RG = 2 kW 2 10 dB 1 4 VCE = −5 V, IC = −200 mA, RG = 2 kW, f = 30 to 15000 MHz 1.2 4.0 1.2 2.0 BC556 / BC557 / BC558 BC559 / BC560 BC559 BC560 150 MHz Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. hFE CLASSIFICATION Classification A B C hFE2 110 ~ 220 200 ~ 450 420 ~ 800 ORDERING INFORMATION Marking Package Shipping† BC556ABU BC556A TO−92−3, case 135AN (Pb−Free) 10,000 Units/ Bulk Box BC556ATA BC556A TO−92−3, case 135AR (Pb−Free) 2,000 Units/ Fan−Fold BC556BTA BC556B TO−92−3, case 135AR (Pb−Free) 2,000 Units/ Fan−Fold BC556BTF BC556B TO−92−3, case 135AR (Pb−Free) 2,000 Units/ Tape & Reel BC556BTFR BC556B TO−92−3, case 135AR (Pb−Free) 2,000 Units/ Tape & Reel BC557ATA BC557A TO−92−3, case 135AR (Pb−Free) 2,000 Units/ Fan−Fold BC557BTA BC557B TO−92−3, case 135AR (Pb−Free) 2,000 Units/ Fan−Fold BC557BTF BC557B TO−92−3, case 135AR (Pb−Free) 2,000 Units/ Tape & Reel BC558BTA BC558B TO−92−3, case 135AR (Pb−Free) 2,000 Units/ Fan−Fold BC559BTA BC559B TO−92−3, case 135AR (Pb−Free) 2,000 Units/ Fan−Fold BC559CTA BC559C TO−92−3, case 135AR (Pb−Free) 2,000 Units/ Fan−Fold BC560CTA BC560C TO−92−3, case 135AR (Pb−Free) 2,000 Units/ Fan−Fold Part Number †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. www.onsemi.com 2 BC556, BC557, BC558, BC559, BC560 TYPICAL PERFORMANCE CHARACTERISTICS 1000 IB = −400 mA −45 −40 IB = −300 mA −35 IB = −250 mA −30 IB = −200 mA −25 −20 IB = −150 mA −15 IB = −100 mA −10 TA = 150 C o TA = 25 C o TA = −55 C 100 IB = −50 mA −5 −0 −2 −4 −6 −8 10 −10 −12 −14 −16 −18 −20 −1 VCE, COLLECTOR−EMITTER VOLTAGE [V] −10 −100 −1000 IC, COLLECTOR CURRENT [mA] Figure 1. Static Characteristic VCE(sat), COLLECTOR−EMITTER SATURATION VOLTAGE [V] VCE = −5 V o IB = −350 mA hFE, DC CURRENT GAIN IC, COLLECTOR CURRENT [mA] −50 Figure 2. DC Current Gain −1000 −10 IC, COLLECTOR CURRENT [mA] IC = 20 I B −1 o o TA = 150 C TA = 25 C −0.1 o TA = −55 C IC = 20 I B −100 −10 −100 −1000 IC, COLLECTOR CURRENT [mA] o o −0.2 o TA = 25 C TA = 150 C −1 −0.0 −0.01 −1 −10 −0.4 −0.6 TA = −55 C −0.8 −1.0 −1.2 VBE(sat), BASE−EMITTER SATURATION VOLTAGE [V] Figure 4. Base−Emitter Saturation Voltage Figure 3. Collector−Emitter Saturation Voltage VCE = −5 V Cob, CAPACITANCE [pF] IC, COLLECTOR CURRENT [mA] −1000 −100 −10 o TA = 150 C 0 −0.2 −0.4 o TA = 25 C −0.6 f=1MHz IE = 0 10 o TA = −55 C −0.8 −1.0 1 −1 −1.2 −10 −100 VBE(on), BASE−EMITTER ON VOLTAGE [V] VCB, COLLECTOR−BASE VOLTAGE [V] Figure 5. Base−Emitter On Voltage Figure 6. Collector Output Capacitance www.onsemi.com 3 BC556, BC557, BC558, BC559, BC560 TYPICAL PERFORMANCE CHARACTERISTICS (continued) 1000 V CE = −5 V PD, POWER DISSIPATION [mW] fT, CURRENT GAIN BANDWIDTH PRODUCT [MHz] 1000 100 100 10 1 10 −1 −10 0 IC, COLLECTOR CURRENT [mA] r(t), NORMALIZED TRANSIENT THERMAL RESISTANCE Figure 8. Power Deration 1000 50% 30% 10% 10 Rthja(t)=r(t)*Rthja o Rthja=250 C/W 5% 2% 1 0.1 D=1% Single Pulse 0.01 1E−5 1E−4 1E−3 0.01 0.1 1 10 100 100 TA, AMBIENT TEMPERATURE [°C] Figure 7. Current Gain Bandwidth Product 100 50 1000 t1, TIME [s] Figure 9. Normalized Transient Thermal Resistance www.onsemi.com 4 150 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS TO−92 3 4.825x4.76 CASE 135AN ISSUE O DOCUMENT NUMBER: DESCRIPTION: 98AON13880G TO−92 3 4.825X4.76 DATE 31 JUL 2016 Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2019 www.onsemi.com MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS TO−92 3 4.83x4.76 LEADFORMED CASE 135AR ISSUE O DOCUMENT NUMBER: DESCRIPTION: 98AON13879G DATE 30 SEP 2016 Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. TO−92 3 4.83X4.76 LEADFORMED PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2019 www.onsemi.com onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com onsemi Website: www.onsemi.com ◊ TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative