BCX18LT1

BCX17LT1, BCX18LT1, PNP BCX19LT1, NPN General Purpose Transistors (Voltage and Current are Negative for PNP Transistors) Features http://onsemi.com PNP • Pb−Free Package is Available 1 BASE COLLECTOR 3 MAXIMUM RATINGS Rating Collector−Emitter Voltage BCX17LT1, BCX19LT1 BCX18LT1 Collector−Base Voltage BCX17LT1, BCX19LT1 BCX18LT1 Emitter −Base Voltage Collector Current − Continuous Symbol VCEO 45 25 VCBO 50 30 VEBO IC 5.0 500 Vdc mAdc 3 1 2 Vdc Value Unit Vdc 2 EMITTER NPN COLLECTOR 3 1 BASE 2 EMITTER Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. SOT−23 CASE 318 STYLE 6 THERMAL CHARACTERISTICS Characteristic Total Device Dissipation FR− 5 Board (Note 1), TA = 25°C Derate above 25°C Thermal Resistance, Junction−to−Ambient Total Device Dissipation Alumina Substrate, (Note 2) TA = 25°C Derate above 25°C Thermal Resistance, Junction−to−Ambient Junction and Storage Temperature Symbol PD Max 225 1.8 RqJA PD 300 2.4 RqJA TJ, Tstg 417 −55 to +150 mW mW/°C °C/W °C xx M = T1, T2, or U1 = Date Code 556 Unit mW mW/°C °C/W xxM MARKING DIAGRAM ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet. 1. FR−5 = 1.0  0.75  0.062 in. 2. Alumina = 0.4  0.3  0.024 in 99.5% alumina. © Semiconductor Components Industries, LLC, 2004 1 December, 2004 − Rev. 3 Publication Order Number: BCX17LT1/D BCX17LT1, BCX18LT1, PNP BCX19LT1, NPN ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic OFF CHARACTERISTICS Collector−Emitter Breakdown Voltage (IC = 10 mAdc, IB = 0) Collector−Emitter Breakdown Voltage (IC = 10 mAdc, IC = 0) Collector Cutoff Current (VCB = 20 Vdc, IE = 0) (VCB = 20 Vdc, IE = 0, TA = 150°C) Emitter Cutoff Current (VEB = 5.0 Vdc, IC = 0) ON CHARACTERISTICS DC Current Gain (IC = 100 mAdc, VCE = 1.0 Vdc) (IC = 300 mAdc, VCE = 1.0 Vdc) (IC = 500 mAdc, VCE = 1.0 Vdc) Collector−Emitter Saturation Voltage (IC = 500 mAdc, IB = 50 mAdc) Base−Emitter On Voltage (IC = 500 mAdc, VCE = 1.0 Vdc) hFE 100 70 40 VCE(sat) VBE(on) − − − − − − − 600 − − 0.62 1.2 Vdc Vdc − V(BR)CEO BCX17, 19 BCX18 V(BR)CES BCX17, 19 BCX18 ICBO − − IEBO − − − − 100 5.0 10 nAdc mAdc mAdc 50 30 − − − − 45 25 − − − − Vdc Vdc Symbol Min Typ Max Unit ORDERING INFORMATION Device BCX17LT1 BCX17LT1G BCX17LT3 BCX18LT1 BCX19LT1 Marking T1 T1 T1 T2 U1 Package SOT−23 SOT−23 (Pb−Free) SOT−23 SOT−23 SOT−23 Shipping† 3,000 Tape & Reel 3,000 Tape & Reel 10,000 Tape & Reel 3,000 Tape & Reel 3,000 Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 2 BCX17LT1, BCX18LT1, PNP BCX19LT1, NPN 1000 VCE = 1 V TJ = 25°C hFE, DC CURRENT GAIN 100 10 0.1 1.0 10 100 IC, COLLECTOR CURRENT (mA) 1000 Figure 1. DC Current Gain VCE , COLLECTOR−EMITTER VOLTAGE (VOLTS) 1.0 TJ = 25°C 0.8 V, VOLTAGE (VOLTS) 0.6 0.4 0.2 0 0.01 IC = 10 mA 100 mA 300 mA 500 mA 1.0 TA = 25°C 0.8 0.6 0.4 0.2 VCE(sat) @ IC/IB = 10 0.1 1 IB, BASE CURRENT (mA) 10 100 0 1 10 100 IC, COLLECTOR CURRENT (mA) 1000 VBE(sat) @ IC/IB = 10 VBE(on) @ VCE = 1 V Figure 2. Saturation Region Figure 3. “On” Voltages θV, TEMPERATURE COEFFICIENTS (mV/°C) +1 qVC for VCE(sat) C, CAPACITANCE (pF) 100 0 Cib 10 −1 −2 qVB for VBE Cob 1 10 100 IC, COLLECTOR CURRENT (mA) 1000 1 0.1 1 10 VR, REVERSE VOLTAGE (VOLTS) 100 Figure 4. Temperature Coefficients Figure 5. Capacitances http://onsemi.com 3 BCX17LT1, BCX18LT1, PNP BCX19LT1, NPN PACKAGE DIMENSIONS SOT−23 (TO−236) CASE 318−08 ISSUE AK NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. 4. 318−01 THRU −07 AND −09 OBSOLETE, NEW STANDARD 318−08. INCHES MIN MAX 0.1102 0.1197 0.0472 0.0551 0.0350 0.0440 0.0150 0.0200 0.0701 0.0807 0.0005 0.0040 0.0034 0.0070 0.0140 0.0285 0.0350 0.0401 0.0830 0.1039 0.0177 0.0236 MILLIMETERS MIN MAX 2.80 3.04 1.20 1.40 0.89 1.11 0.37 0.50 1.78 2.04 0.013 0.100 0.085 0.177 0.35 0.69 0.89 1.02 2.10 2.64 0.45 0.60 A L 3 1 2 BS V G C D H K J DIM A B C D G H J K L S V STYLE 6: PIN 1. BASE 2. EMITTER 3. COLLECTOR SOLDERING FOOTPRINT* 0.95 0.037 0.95 0.037 2.0 0.079 0.9 0.035 0.8 0.031 SCALE 10:1 mm inches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800−282−9855 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Phone: 81−3−5773−3850 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. http://onsemi.com 4 BCX17LT1/D