BF422

BF422 High Voltage Transistors NPN Silicon Features • This is a Pb−Free Device* MAXIMUM RATINGS Rating Collector − Emitter Voltage Collector − Base Voltage Emitter − Base Voltage Collector Current − Continuous Collector Current − Peak Total Device Dissipation (Note 1) @ TA = 25°C Derate above 25°C Operating and Storage Junction Temperature Range Symbol VCEO VCBO VEBO IC ICM PD Value 250 250 5.0 50 100 830 6.6 − 55 to +150 Unit Vdc Vdc Vdc mAdc mA mW mW/°C °C http://onsemi.com COLLECTOR 2 3 BASE 1 EMITTER TJ, Tstg THERMAL CHARACTERISTICS Characteristic Thermal Resistance, Junction−to−Ambient Thermal Resistance, Junction−to−Lead Symbol RqJA RqJL Max 150 68 Unit °C/W °C/W 3 STRAIGHT LEAD BULK PACK 12 1 3 BENT LEAD TAPE & REEL AMMO PACK 2 TO−92 (TO−226AA) CASE 29−11 STYLE 14 MARKING DIAGRAM BF422 AYWW G G Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. Mounted on a FR4 board with 200 mm2 of 1 oz copper and lead length of 5 mm. BF422 A Y WW G = = = = = Device Code Assembly Location Year Work Week Pb−Free Package (Note: Microdot may be in either location) ORDERING INFORMATION Device BF422G Package TO−92 (Pb−Free) Shipping† 5000 Units/Box *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. © Semiconductor Components Industries, LLC, 2010 September, 2010 − Rev. 1 1 Publication Order Number: BF422/D BF422 ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Symbol Min Max Unit OFF CHARACTERISTICS Collector − Emitter Breakdown Voltage (Note 1) (IC = 1.0 mAdc, IB = 0) Collector − Base Breakdown Voltage (IC = 100 mAdc, IE = 0) Emitter − Base Breakdown Voltage (IE = 100 mAdc, IC = 0) Collector Cutoff Current (VCB = 200 Vdc, IE = 0) Emitter Cutoff Current (VEB = 5.0 Vdc, IC = 0) V(BR)CEO V(BR)CBO V(BR)EBO ICBO IEBO 300 300 5.0 − − − − − 0.01 100 Vdc Vdc Vdc mAdc nAdc ON CHARACTERISTICS DC Current Gain (IC = 25 mAdc, VCE = 20 Vdc) Collector − Emitter Saturation Voltage (IC = 20 mAdc, IB = 2.0 mAdc) Base − Emitter Saturation Voltage (IC = 20 mAdc, IB = 2.0 mAdc) hFE VCE(sat) VBE(sat) 50 − − − 0.5 2.0 − Vdc Vdc SMALL− SIGNAL CHARACTERISTICS Current Gain − Bandwidth Product (IC = 10 mAdc, VCE = 10 Vdc, f = 20 MHz) Common Emitter Feedback Capacitance (VCB = 30 Vdc, IE = 0, f = 1.0 MHz) 1. Pulse Test: Pulse Width v 300 ms; Duty Cycle v 2.0%. fT Cre 60 − − 1.6 MHz pF http://onsemi.com 2 BF422 120 100 hFE, DC CURRENT GAIN 80 60 40 -55°C 20 0 0.1 1.0 IC, COLLECTOR CURRENT (mA) 10 100 25°C TJ = +125°C VCE = 10 Vdc Figure 1. DC Current Gain 100 Ceb @ 1MHz C, CAPACITANCE (pF) f T, CURRENT-GAIN — BANDWIDTH (MHz) 80 70 60 50 40 30 20 10 1.0 2.0 3.0 5.0 7.0 10 20 30 IC, COLLECTOR CURRENT (mA) TJ = 25°C VCE = 20 V f = 20 MHz 50 70 100 10 1.0 Ccb @ 1MHz 0.1 0.1 1.0 10 100 VR, REVERSE VOLTAGE (VOLTS) 1000 Figure 2. Capacitance Figure 3. Current−Gain − Bandwidth 1.4 1.2 V, VOLTAGE (VOLTS) 1.0 0.8 0.6 0.4 0.2 0.0 0.1 1.0 10 IC, COLLECTOR CURRENT (mA) 100 VCE(sat) @ 25°C, IC/IB = 10 VCE(sat) @ 125°C, IC/IB = 10 VCE(sat) @ -55°C, IC/IB = 10 VBE(sat) @ 25°C, IC/IB = 10 VBE(sat) @ 125°C, IC/IB = 10 VBE(sat) @ -55°C, IC/IB = 10 VBE(on) @ 25°C, VCE = 10 V VBE(on) @ 125°C, VCE = 10 V VBE(on) @ -55°C, VCE = 10 V Figure 4. ”ON” Voltages http://onsemi.com 3 BF422 PACKAGE DIMENSIONS TO−92 (TO−226) CASE 29−11 ISSUE AM A R P L SEATING PLANE B STRAIGHT LEAD BULK PACK NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.021 0.045 0.055 0.095 0.105 0.015 0.020 0.500 --0.250 --0.080 0.105 --0.100 0.115 --0.135 --MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.407 0.533 1.15 1.39 2.42 2.66 0.39 0.50 12.70 --6.35 --2.04 2.66 --2.54 2.93 --3.43 --- K XX H V 1 D G J C N N SECTION X−X DIM A B C D G H J K L N P R V STYLE 14: PIN 1. EMITTER 2. COLLECTOR 3. BASE R A B BENT LEAD TAPE & REEL AMMO PACK P T SEATING PLANE NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.40 0.54 2.40 2.80 0.39 0.50 12.70 --2.04 2.66 1.50 4.00 2.93 --3.43 --- K G XX V 1 D J C N SECTION X−X DIM A B C D G J K N P R V ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone : 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5773−3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative http://onsemi.com 4 BF422/D