BYW51-200G

BYW51-200 Switch‐mode Power Rectifier Features and Benefits • • • • • • Low Forward Voltage Low Power Loss/High Efficiency High Surge Capacity 175°C Operating Junction Temperature 16 A Total (8 A Per Diode Leg) These Devices are Pb−Free and are RoHS Compliant* www.onsemi.com ULTRAFAST RECTIFIER 16 AMPERES, 200 VOLTS trr = 35 ns Applications • Power Supply − Output Rectification • Power Management • Instrumentation 1 2, 4 3 Mechanical Characteristics • • • • • • Case: Epoxy, Molded Epoxy Meets UL 94 V−0 @ 0.125 in Weight: 1.9 Grams (Approximately) Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds ESD Rating: Human Body Model 3B Machine Model C MARKING DIAGRAM TO−220 CASE 221A PLASTIC A Y WW BYW51−200 G AKA AYWW BYW51−200G AKA = Assembly Location = Year = Work Week = Device Code = Pb−Free Package = Diode Polarity ORDERING INFORMATION Device BYW51−200G Package Shipping TO−220 (Pb−Free) 50 Units/Rail *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2014 November, 2014 − Rev. 4 1 Publication Order Number: BYW51−200/D BYW51−200 MAXIMUM RATINGS Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Rating VRRM VRWM VR 200 V Average Rectified Forward Current TC = 156°C Per Leg Total Device IF(AV) A 8.0 16 Peak Rectified Forward Current (Square Wave, 20 kHz), TC = 153°C − Per Diode Leg IFM 16 A Nonrepetitive Peak Surge Current (Surge applied at rated load conditions halfwave, single phase, 60 Hz) IFSM 100 A TJ, Tstg −65 to +175 °C Operating Junction Temperature and Storage Temperature Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. THERMAL CHARACTERISTICS Characteristic Conditions Symbol Value Unit Maximum Thermal Resistance, Junction−to−Case Min. Pad RqJC 3.0 °C/W Maximum Thermal Resistance, Junction−to−Ambient Min. Pad RqJA 60.0 Min Typical Max − − 0.8 0.89 0.89 0.97 − − 21 3.8 1000 10 − − 35 25 ELECTRICAL CHARACTERISTICS Characteristic Symbol Instantaneous Forward Voltage (Note 1) (iF = 8.0 A, Tj = 100°C) (iF = 8.0 A, Tj = 25°C) vF Maximum Instantaneous Reverse Current (Note 1) (Rated dc Voltage, Tj = 100°C) (Rated dc Voltage, Tj = 25°C) iR Maximum Reverse Recovery Time (IF = 1.0 A, di/dt = 50 A/s) (IF = 0.5 A, IR = 1.0 A, IREC = 0.25 A) trr Unit V mA ns Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 1. Pulse Test: Pulse Width = 300 s, Duty Cycle ≤ 2.0% www.onsemi.com 2 BYW51−200 70 50 30 100°C 10 7.0 175°C 25°C 100°C 10 1.0 0.1 0.2 0.3 25°C 5.0 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Figure 2. Maximum Forward Voltage 3.0 2.0 IR, REVERSE CURRENT (m A) i F , INSTANTANEOUS FORWARD CURRENT (AMPS) 20 TJ = 175°C 100 IF, INSTANTANEOUS FORWARD CURRENT (A) 100 1.0 0.7 0.5 0.3 0.2 800 400 200 80 40 20 8.0 4.0 2.0 TJ = 175°C 100°C 0.8 0.4 0.2 0.08 0.04 0.02 25°C 0 40 20 60 80 100 120 140 160 180 200 VR, REVERSE VOLTAGE (VOLTS) 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 Figure 3. Typical Reverse Current, Per Leg* 1.2 * The curves shown are typical for the highest voltage device in the voltage grouping. Typical reverse current for lower voltage selections can be es­ timated from these same curves if VR is sufficiently below rated VR. vF, INSTANTANEOUS VOLTAGE (VOLTS) Figure 1. Typical Forward Voltage, Per Leg 20 IF(AV), AVERAGE FORWARD CURRENT (A) IF(AV), AVERAGE FORWARD CURRENT (A) 20 18 16 14 12 10 dc 8.0 6.0 SQUARE WAVE 4.0 2.0 0 140 145 150 155 160 165 170 175 180 RqJA = 16°C/W RqJA = 60°C/W (NO HEATSINK) 18 16 14 dc 12 10 8.0 SQUARE WAVE 6.0 dc 4.0 SQUARE WAVE 2.0 0 0 TC, CASE TEMPERATURE (°C) 25 50 75 100 125 150 175 TA, AMBIENT TEMPERATURE (°C) Figure 4. Current Derating, Case, Per Leg Figure 5. Current Derating, Ambient, Per Leg www.onsemi.com 3 BYW51−200 1000 22 TJ = 175°C 20 18 SQUARE WAVE 16 14 12 C, CAPACITANCE (pF) PF(AV), AVERAGE POWER DISSIPATION (W) 24 dc 10 8.0 6.0 300 TJ = 25°C 100 30 4.0 2.0 0 10 0 2.0 4.0 6.0 8.0 10 12 14 16 18 1.0 20 IF(AV), AVERAGE FORWARD CURRENT (AMPS) Figure 6. Power Dissipation, Per Leg 10 VR, REVERSE VOLTAGE (VOLTS) Figure 7. Typical Capacitance, Per Leg www.onsemi.com 4 100 onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com onsemi Website: www.onsemi.com ◊ TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative