CD4060BCMX

CD4040BC, 12-Stage Ripple Carry Binary Counters CD4060BC, 14-Stage Ripple Carry Binary Counters tm Features General Description ■ Wide supply voltage range: 3.0V to 15V The CD4060BC is a 14-stage ripple carry binary counter, and the CD4040BC is a 12-stage ripple carry binary counter. The counters are advanced one count on the negative transition of each clock pulse. The counters are reset to the zero state by a logical “1” at the reset input independent of clock. ■ High noise immunity: 0.45 VDD (Typ.) ■ Low power TTL compatibility: Fan out of 2 driving 74L or 1 driving 74LS Medium speed operation: 8MHz typ. at VDD = 10V ■ ■ Schmitt trigger clock input Ordering Information Order Number Package Number Package Description CD4040BCM M16A 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow CD4060BCM M16A 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow CD4060BCN N16E 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering number. Connection Diagrams Pin Assignments for DIP and SOIC CD4040BC Pin Assignments for DIP and SOIC CD4060BC Top View Top View ©1987 Fairchild Semiconductor Corporation CD4040BC, DCD4060BC Rev. 1.5 www.fairchildsemi.com CD4040BC, 12-Stage Ripple Carry Binary Counters CD4060BC, 14-Stage Ripple Carry Binary Counters May 2007 CD4040BC, 12-Stage Ripple Carry Binary Counters CD4060BC, 14-Stage Ripple Carry Binary Counters Schematic Diagrams CD4040BC CD4060BC ©1987 Fairchild Semiconductor Corporation CD4040BC, DCD4060BC Rev. 1.5 www.fairchildsemi.com 2 CD4040BC, 12-Stage Ripple Carry Binary Counters CD4060BC, 14-Stage Ripple Carry Binary Counters CD4060B Typical Oscillator Connections RC Oscillator Crystal Oscillator ©1987 Fairchild Semiconductor Corporation CD4040BC, DCD4060BC Rev. 1.5 www.fairchildsemi.com 3 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Parameter VDD Supply Voltage VIN Input Voltage TS Storage Temperature Range PD Package Dissipation TL Rating –0.5V to +18V –0.5V to VDD +0.5V –65°C to +150°C N Package 700mW M Package 500 mW Lead Temperature (Soldering, 10 seconds) 260°C Note: 1. VSS = 0V unless otherwise specified. Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Symbol Parameter VDD Supply Voltage VIN Input Voltage TA Operating Temperature Range ©1987 Fairchild Semiconductor Corporation CD4040BC, DCD4060BC Rev. 1.5 Rating +3V to +15V 0V to VDD –55°C to +125°C www.fairchildsemi.com 4 CD4040BC, 12-Stage Ripple Carry Binary Counters CD4060BC, 14-Stage Ripple Carry Binary Counters Absolute Maximum Ratings(1) –55°C Symbol IDD Parameter Conditions Quiescent Device VDD = 5V, VIN = VDD or VSS Current VDD = 10V, VIN = VDD or VSS VOH VIL LOW Level Output Voltage HIGH Level Output Voltage LOW Level Input Voltage IOL IOH IIN HIGH Level Input Voltage LOW Level Output Current(3) HIGH Level Output Current(3) Input Current 5 5 150 10 10 300 20 600 VDD = 5V 0.05 20 0 0.05 0.05 VDD = 10V 0.05 0 0.05 0.05 VDD = 15V 0.05 0 0.05 0.05 VDD = 5V 4.95 4.95 5 4.95 VDD = 10V 9.95 9.95 10 9.95 VDD = 15V 14.95 14.95 15 14.95 VDD = 5V, VO = 0.5V or 4.5V 1.5 2 1.5 1.5 3.0 4 3.0 3.0 6 4.0 4.0 3.5 3.5 3 3.5 VDD = 10V, VO = 1.0V or 9.0V 7.0 7.0 6 7.0 VDD = 15V, VO = 1.5V or 13.5V 11.0 11.0 9 11.0 VDD = 5V, VO = 0.4V 0.64 0.51 0.88 0.36 VDD = 10V, VO = 0.5V 1.6 1.3 2.25 0.9 VDD = 15V, VO = 1.5V 4.2 3.4 8.8 2.4 VDD = 5V, VO = 4.6V –0.64 –0.51 –0.88 –0.36 VDD = 10V, VO = 9.5V –1.6 –1.3 –2.25 –0.9 VDD = 15V, VO = 13.5V –4.2 –3.4 –8.8 –2.4 –0.1 VDD = 15V, VIN = 15V 0.1 V V mA mA –5 –0.1 –1.0 10–5 0.1 1.0 –10 V 4.0 VDD = 5V, VO = 0.5V or 4.5V VDD = 15V, VIN = 0V µA V VDD = 10V, VO = 1.0V or 9.0V VDD = 15V, VO = 1.5V or 13.5V VIH +125°C Min. Max. Min. Typ. Max. Min. Max. Units VDD = 15V, VIN = VDD or VSS VOL +25°C µA Note: 2. VSS = 0V unless otherwise specified. 3. Data does not apply to oscillator points φ0 and φ0 of CD4060BC. IOH and IOL are tested one output at a time. ©1987 Fairchild Semiconductor Corporation CD4040BC, DCD4060BC Rev. 1.5 www.fairchildsemi.com 5 CD4040BC, 12-Stage Ripple Carry Binary Counters CD4060BC, 14-Stage Ripple Carry Binary Counters DC Electrical Characteristics(2) CD4040BC TA = 25°C, CL = 50pF, RL = 200kΩ, tr = tf = 20 ns, unless otherwise noted. Symbol tPHL1, tPLH1 tPHL, tPLH tTHL, tTLH tWL, tWH trCL, tfCL Parameter Propagation Delay Time to Q1 Interstage Propagation Delay Time from Qn to Qn+1 Transition Time Minimum Clock Pulse Width Maximum Clock Rise and Fall Time Conditions Min. Typ. Max. Units VDD = 5V 250 550 ns VDD = 10V 100 210 VDD = 15V 75 150 VDD = 5V 150 330 VDD = 10V 60 125 VDD = 15V 45 90 VDD = 5V 100 200 VDD = 10V 50 100 VDD = 15V 40 80 VDD = 5V 125 335 VDD = 10V 50 125 VDD = 15V 40 tPHL(R) tWH(R) Maximum Clock Frequency Reset Propagation Delay Minimum Reset Pulse Width CIN Average Input Capacitance CPD Power Dissipation Capacitance ns ns 100 VDD = 5V No Limit VDD = 10V No Limit VDD = 15V fCL ns No Limit VDD = 5V 1.5 4 VDD = 10V 4 10 VDD = 15V 5 12 MHz VDD = 5V 200 450 VDD = 10V 100 210 VDD = 15V 80 170 VDD = 5V 200 450 VDD = 10V 100 210 VDD = 15V 80 170 5 7.5 Any Input ns 50 ns ns pF pF Note: 4. AC Parameters are guaranteed by DC correlated testing. ©1987 Fairchild Semiconductor Corporation CD4040BC, DCD4060BC Rev. 1.5 www.fairchildsemi.com 6 CD4040BC, 12-Stage Ripple Carry Binary Counters CD4060BC, 14-Stage Ripple Carry Binary Counters AC Electrical Characteristics(4) CD4060BC TA = 25°C, CL = 50pF, RL = 200k, tr = tf = 20 ns, unless otherwise noted. Symbol Parameter tPHL4, tPLH4 Propagation Delay Time to Q4 tPHL, tPLH Interstage Propagation Delay Time from Qn to Qn+1 tTHL, tTLH Transition Time tWL, tWH Minimum Clock Pulse Width Conditions Min. Typ. Max. Units VDD = 5V 550 1300 ns VDD = 10V 250 525 VDD = 15V 200 400 VDD = 5V 150 330 VDD = 10V 60 125 VDD = 15V 45 90 VDD = 5V 100 200 VDD = 10V 50 100 VDD = 15V 40 80 VDD = 5V 170 500 VDD = 10V 65 170 VDD = 15V 50 Maximum Clock Rise and Fall Time VDD = 5V trCL, tfCL tPHL(R) Reset Propagation Delay tWH(R) Minimum Reset Pulse Width CIN Average Input Capacitance CPD Power Dissipation Capacitance 125 ns No Limit VDD = 5V 1 3 VDD = 10V 3 8 VDD = 15V 4 10 MHz VDD = 5V 200 450 VDD = 10V 100 210 VDD = 15V 80 170 VDD = 5V 200 450 VDD = 10V 100 210 VDD = 15V 80 170 5 7.5 Any Input ns No Limit VDD = 15V Maximum Clock Frequency ns No Limit VDD = 10V fCL ns 50 ns ns pF pF Note: 5. AC Parameters are guaranteed by DC correlated testing. RC Oscillator Notes: 1. R2 = 2 R1 to 10 R1 2. RC Oscillator applications are not recommended at supply voltages below 7.0V for R1 < 50kΩ 3. f ≈ 1 2.2 R1 CX at VCC = 10V ©1987 Fairchild Semiconductor Corporation CD4040BC, DCD4060BC Rev. 1.5 www.fairchildsemi.com 7 CD4040BC, 12-Stage Ripple Carry Binary Counters CD4060BC, 14-Stage Ripple Carry Binary Counters AC Electrical Characteristics(5) CD4040BC, 12-Stage Ripple Carry Binary Counters CD4060BC, 14-Stage Ripple Carry Binary Counters Physical Dimensions Dimensions are in millimeters unless otherwise noted. Figure 1. 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Package Number M16A ©1987 Fairchild Semiconductor Corporation CD4040BC, DCD4060BC Rev. 1.5 www.fairchildsemi.com 8 CD4040BC, 12-Stage Ripple Carry Binary Counters CD4060BC, 14-Stage Ripple Carry Binary Counters Physical Dimensions (Continued) Dimensions are in inches (millimeters) unless otherwise noted. Figure 2. 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Package Number N16E ©1987 Fairchild Semiconductor Corporation CD4040BC, DCD4060BC Rev. 1.5 www.fairchildsemi.com 9 The following are registered and unregistered trademarks and service marks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks ACEx® Build it Now™ CorePLUS™ CROSSVOLT™ CTL™ Current Transfer Logic™ EcoSPARK® FACT Quiet Series™ FACT® FAST® FastvCore™ FPS™ FRFET® Global Power ResourceSM Green FPS™ Green FPS™ e-Series™ GTO™ i-Lo™ IntelliMAX™ ISOPLANAR™ MegaBuck™ MICROCOUPLER™ MicroPak™ Motion-SPM™ OPTOLOGIC® OPTOPLANAR® PDP-SPM™ Power220® Power247® POWEREDGE® Power-SPM™ PowerTrench® Programmable Active Droop™ QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ SMART START™ SPM® STEALTH™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ The Power Franchise® ™ TinyBoost™ TinyBuck™ TinyLogic® TINYOPTO™ TinyPower™ TinyPWM™ TinyWire™ µSerDes™ UHC® UniFET™ VCX™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I28 ©1987 Fairchild Semiconductor Corporation CD4040BC, DCD4060BC Rev. 1.5 www.fairchildsemi.com 10 CD4040BC, 12-Stage Ripple Carry Binary Counters CD4060BC, 14-Stage Ripple Carry Binary Counters TRADEMARKS