CM1407-08DF

4 and 8-Channel EMI Filter Arrays with ESD Protection CM1407 Features • • • • • • • Four and eight channels of EMI filtering with ESD protection Greater than 25dB of attenuation from 800MHz to 3GHz 15kV ESD protection (IEC 61000-4-2, contact discharge) 30kV ESD protection (MIL-STD-883, Method 3015, HBM) Fabricated with Centurion™ advanced low capacitance zener process technology Space saving, low profile 8 and 16-lead 0.5mm pitch TDFN packages Lead-free version available Product Description California Micro Devices CM1407 is an EMI filter array with ESD protection, which integrates either four or eight pi filters (C-R-C). The CM1407 has component values of 7.5pF-200W-7.5pF (fC = 210MHz). The parts include ESD protection diodes on every pin, providing a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD diodes connected to the filter ports safely dissipate ESD strikes of •15kV contact discharge, twice the specification requirement of the IEC 61000-4-2, Level 4 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than •30kV. This device is particularly well-suited for portable electronics (e.g. mobile handsets, PDAs, notebook computers) because of its small package and easyto-use pin assignments. In particular, the CM1407 is ideal for EMI filtering and protecting data lines from ESD in wireless handsets. The CM1407 is available in space-saving, low-profile, 8 and 16-lead TDFN packages. It is fabricated with California Micro Devices' Centurion™ process and available with optional lead-free finishing. Applications • • • I/O port protection for mobile handsets, notebook computers, PDAs etc. EMI filtering for data ports in cell phones, PDAs or notebook computers. EMI filtering for LCD, camera and chip-to-chip data lines ©2010 SCILLC. All rights reserved. April 2010 Rev.2 Publication Order Number: CM1407/D CM1407 Block Diagram Rev. 2 | Page 2 of 14 | www.onsemi.com CM1407 PIN DESCRIPTIONS Pins CM1407 CM1407 -04Dx -08Dx 1 2 3 4 1 2 3 4 5 6 7 8 GND Pad NAME FILTER1 FILTER2 FILTER3 FILTER4 FILTER5 FILTER6 FILTER7 FILTER8 GND DESCRIPTION Filter Channel 1 Filter Channel 2 Filter Channel 3 Filter Channel 4 Filter Channel 5 Filter Channel 6 Filter Channel 7 Filter Channel 8 Device Ground Pins CM1407 CM1407 -04Dx -08Dx 8 7 6 5 16 15 14 13 12 11 10 9 NAME FILTER1 FILTER2 FILTER3 FILTER4 FILTER5 FILTER6 FILTER7 FILTER8 DESCRIPTION Filter Channel 1 Filter Channel 2 Filter Channel 3 Filter Channel 4 Filter Channel 5 Filter Channel 6 Filter Channel 7 Filter Channel 8 Ordering Information PART NUMBERING INFORMATION Standard Finish Leads/Pins 8 16 Package TDFN-08 TDFN-16EEP Ordering Part Number1 CM1407-04DF CM1407-08DF Lead-free Finish Ordering Part Number1 CM1407-04DE CM1407-08DE Part Marking N07 4F N78F Part Marking N07 4E N78E Note 1: Parts are shipped in Tape & Reel form unless otherwise specified. Rev. 2 | Page 3 of 14 | www.onsemi.com CM1407 Specifications ABSOLUTE MAXIMUM RATINGS PARAMETER Storage Temperature Range DC Power Rating per Resistor Package DC Power Rating RATING -65 to +150 100 300 UNITS °C mW mW STANDARD OPERATING CONDITIONS PARAMETER Operating Temperature Range RATING -40 to +85 UNITS °C ELECTRICAL OPERATING CHARACTERISTICS (SEE NOTE 1) SYMBOL R C PARAMETER Resistance Capacitance At 2.5V DC, 1MHz, 30mV AC IDIODE = 10μA VDIODE = 3.3V CONDITIONS MIN 160 6 TYP 200 7.5 MAX 240 9 UNITS Ω pF VDIODE ILEAK VSIG Diode Standoff Voltage Diode Leakage Current (reverse bias) Signal Voltage Positive Clamp Negative Clamp In-system ESD Withstand Voltage a) Human Body Model, MIL-STD-883, Method 3015 b) Contact Discharge per IEC 61000-4-2 Level 4 6.0 0.1 1 V μA ILOAD = 10mA ILOAD = -10mA Note 2 5.6 -1.5 6.8 -0.8 9.0 -0.4 V V VESD 30 15 kV kV Note 1: TA=25°C unless otherwise specified. Note 2: ESD applied to input and output pins with respect to GND, one at a time. Rev. 2 | Page 4 of 14 | www.onsemi.com CM1407 Performance Information Typical Filter Performance (nominal conditions unless specified otherwise, 0V DC Bias, 50 Ohm Environment) Figure 1. Channel 1 EMI Filter Performance (CM1407-04) Figure 2. Channel 2 EMI Filter Performance (CM1407-04) Rev. 2 | Page 5 of 14 | www.onsemi.com CM1407 Performance Information (cont’d) Typical Filter Performance (nominal conditions unless specified otherwise, 0V DC Bias, 50 Ohm Environment) Figure 3. Channel 3 EMI Filter Performance (CM1407-04) Figure 4. Channel 4 EMI Filter Performance (CM1407-04) Rev. 2 | Page 6 of 14 | www.onsemi.com CM1407 Performance Information (cont’d) Typical Filter Performance (nominal conditions unless specified otherwise, 0V DC Bias, 50 Ohm Environment) Figure 5. Channel 1 EMI Filter Performance (CM1407-08) Figure 6. Channel 2 EMI Filter Performance (CM1407-08) Rev. 2 | Page 7 of 14 | www.onsemi.com CM1407 Performance Information (cont’d) Typical Filter Performance (nominal conditions unless specified otherwise, 0V DC Bias, 50 Ohm Environment) Figure 7. Channel 3 EMI Filter Performance (CM1407-08) Figure 8. Channel 4 EMI Filter Performance (CM1407-08) Rev. 2 | Page 8 of 14 | www.onsemi.com CM1407 Performance Information (cont’d) Typical Filter Performance (nominal conditions unless specified otherwise, 0V DC Bias, 50 Ohm Environment) Figure 9. Channel 5 EMI Filter Performance (CM1407-08) Figure 10. Channel 6 EMI Filter Performance (CM1407-08) Rev. 2 | Page 9 of 14 | www.onsemi.com CM1407 Performance Information (cont’d) Typical Filter Performance (nominal conditions unless specified otherwise, 0V DC Bias, 50 Ohm Environment) Figure 11. Channel 7 EMI Filter Performance (CM1407-08) Figure 12. Channel 8 EMI Filter Performance (CM1407-08) Rev. 2 | Page 10 of 14 | www.onsemi.com CM1407 Performance Information (cont’d) Figure 13. Filter Capacitance vs. Input Voltage over Temperature (normalized to capacitance at 2.5VDC and 25°C) Rev. 2 | Page 11 of 14 | www.onsemi.com CM1407 Mechanical Details TDFN-08 Mechanical Specifications Dimensions for CM1407-04DE/DF device packaged in an 8-lead TDFN package are presented below. PACKAGE DIMENSIONS Package JEDEC No. Leads Millimeters Dim. Min A A3 b D D2 E E2 e K L # per tape and reel 0.20 0.25 0.30 0.35 0.20 1.95 1.55 1.95 0.85 0.70 Nom 0.75 0.20 REF 0.25 2.00 1.60 2.00 0.90 0.50 BSC 0.30 2.05 1.65 2.05 0.95 Max 0.80 Min 0.028 Nom 0.030 Max 0.032 TDFN MO-229 (Var. VCCD-3) 8 Inches 0.008 REF 0.008 0.077 0.061 0.077 0.033 0.010 0.079 0.063 0.079 0.035 0.012 0.081 0.065 0.081 0.037 0.020 BSC 0.008 0.010 0.012 0.014 3000 pieces Controlling dimension: millimeters Package Dimensions for 8-Lead TDFN = This package is compliant with JEDEC standard MO-229, variation VCCD-3 with exception of the "D2" and "E2" dimensions as called out in the table above and the "r1" dimension which is not specified in the MO-229 standard. Rev. 2 | Page 12 of 14 | www.onsemi.com CM1407 Mechanical Details (cont’d) TDFN-16 Mechanical Specifications The CM1407-08DF/DE is supplied in an 16-lead, 0.5mm pitch TDFN package with Exposed End Pads (EEP). Dimensions are presented below. PACKAGE DIMENSIONS Package JEDEC No. Leads Millimeters Dim. Min A A1 A3 b D D2 E E2 e K L M # per tape and reel 0.20 0.20 0.30 0.25 REF 3000 pieces 0.40 0.20 3.90 3.10 1.50 0.30 0.70 0.00 Nom 0.75 0.02 0.20 REF 0.25 4.00 3.20 1.60 0.40 0.50 BSC 0.008 0.008 0.010 0.012 0.30 4.10 3.30 1.70 0.50 Max 0.80 0.05 Min 0.028 0.000 Nom 0.030 0.001 Max 0.031 0.002 TDFN MO-229C 16 Inches 0.008 REF 0.008 0.153 0.122 0.059 0.012 0.010 0.157 0.126 0.063 0.016 0.012 0.161 0.130 0.067 0.020 0.020 BSC 0.010 REF Dimensions for 16-Lead, 0.5mm pitch TDFN package with Exposed End Pads (EEP) Controlling dimension: millimeters = This package is compliant with JEDEC standard MO-229C with the exception of the "D", "D2", "E", "E2", "K" and "L" dimensions as called out in the table above. Rev. 2 | Page 13 of 14 | www.onsemi.com CM1407 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative Rev. 2 | Page 14 of 14 | www.onsemi.com