CM1622-08DE

ON Semiconductor Is Now To learn more about onsemi™, please visit our website at www.onsemi.com onsemi and       and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as-is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Other names and brands may be claimed as the property of others. LCD and Camera EMI Filter Array with ESD Protection CM1622 Features Applications • • • • • • • • • Eight channels of EMI filtering with integrated ESD protection Pi-style EMI filters in a capacitor-resistorcapacitor (C-R-C) network ±15kV ESD protection on each channel (IEC 61000-4-2 Level 4, contact discharge) ±30kV ESD protection on each channel (HBM) Greater than -35dB attenuation (typical) at 1GHz NuDFN package with 0.40mm lead pitch: • 16-lead: 3.5mm x 1.20mm x 0.50mm Lead-free finishing ©2010 SCILLC. All rights reserved. May 2010 – Rev. 2 • • • LCD and camera data lines in mobile handsets I/O port protection for mobile handsets, notebook computers, PDAs, etc. EMI filtering for data ports in cell phones, PDAs or notebook computers Wireless handsets Handheld PCs/PDAs Publication Order Number: CM1622/D CM1622 16-PIN DESCRIPTIONS DEVICE PIN(s) NAME 1 FILTER1 2 DESCRIPTION DEVICE PIN(s) NAME Filter + ESD Channel 1 16 FILTER1 Filter + ESD Channel 1 FILTER2 Filter + ESD Channel 2 15 FILTER2 Filter + ESD Channel 2 3 FILTER3 Filter + ESD Channel 3 14 FILTER3 Filter + ESD Channel 3 4 FILTER4 Filter + ESD Channel 4 13 FILTER4 Filter + ESD Channel 4 5 FILTER5 Filter + ESD Channel 5 12 FILTER5 Filter + ESD Channel 5 6 FILTER6 Filter + ESD Channel 6 11 FILTER6 Filter + ESD Channel 6 7 FILTER7 Filter + ESD Channel 7 10 FILTER7 Filter + ESD Channel 7 8 FILTER8 Filter + ESD Channel 8 9 FILTER8 Filter + ESD Channel 8 GND PAD GND Device Ground Rev.2 | Page 2 of 12 | www.onsemi.com DESCRIPTION CM1622 Ordering Information PART NUMBERING INFORMATION Lead-free Finish Pins Package Ordering Part Number1 Part Marking 16 NuDFN-16 CM1622 -08DE P22 Note 1: Parts are shipped in Tape & Reel form unless otherwise specified. Specifications ABSOLUTE MAXIMUM RATINGS PARAMETER RATING UNITS –65 to +150 °C DC Power per Resistor 100 mW DC Package Power Rating 500 mW RATING UNITS –40 to +85 °C Storage Temperature Range STANDARD OPERATING CONDITIONS PARAMETER Operating Temperature Range Rev. 2 | Page 3 of 12 | www.onsemi.com CM1622 ELECTRICAL OPERATING CHARACTERISTICS (NOTE1) SYMBOL MIN TYP MAX UNITS IR= 20mA 85 100 115 Ω Total Channel Capacitance At 2.5VDC Reverse Bias, 1MHz, 30mVAC 20 25 30 pF Capacitance C At 2.5VDC Reverse Bias, 1MHz, 30mVAC 12.5 pF Standoff Voltage IDIODE = 10μA 6.0 V ILEAK Diode Leakage Current (reverse bias) VDIODE = +3.3V 0.01 0.2 μA VSIG Signal Clamp Voltage ILOAD = 1.0mA 7.0 8.0 V VESD In-system ESD Withstand Voltage See Note 2 a) Human Body Model, MIL-STD-883, Method 3015 b) Contact Discharge per IEC 61000-42 Level 4 R CTOTAL C VDIODE RDYN f C A1GHz PARAMETER CONDITIONS Resistance Dynamic Resistance Positive Negative 6.0 ±30 kV ±15 kV 2.3 0.9 Ω Ω 115 MHz Cut-off Frequency ZSOURCE = 50Ω, ZLOAD = 50Ω Channel R = 100Ω, Channel C = 25pF Absolute Attenuation @ 1GHz from 0dB Level ZSOURCE = 50Ω, Z LOAD = 50Ω, DC Bias = 0V; See Notes 1 and 3. -35 dB ZSOURCE = 50Ω, Z LOAD = 50Ω, DC Bias = 0V; See Notes 1 and 3. 30 dB A800MHz - 6GHz Absolute Attenuation @ 800MHz to 6GHz from 0dB Level Note 1: TA=25°C unless otherwise specified. Note 2: ESD applied to input and output pins with respect to GND, one at a time. Note 3: Attenuation / RF curves characterized by a network analyzer using microprobes. Rev.2 | Page 4 of 12 | www.onsemi.com CM1622 Performance Information Typical Filter Performance (TA=25°C, DC Bias=0V, 50 Ohm Environment) Figure 1. Insertion Loss vs. Frequency (FILTER1 Input to GND) Figure 2. Insertion Loss vs. Frequency (FILTER2 Input to GND) Rev. 2 | Page 5 of 12 | www.onsemi.com CM1622 Figure 3. Insertion Loss vs. Frequency (FILTER3 Input to GND) Figure 4. Insertion Loss vs. Frequency (FILTER4 Input to GND) Rev.2 | Page 6 of 12 | www.onsemi.com CM1622 Figure 5. Insertion Loss vs. Frequency (FILTER5 Input to GND) Figure 6. Insertion Loss vs. Frequency (FILTER6 Input to GND) Rev. 2 | Page 7 of 12 | www.onsemi.com CM1622 Figure 7. Insertion Loss vs. Frequency (FILTER7 Input to GND) Figure 8. Insertion Loss vs. Frequency (FILTER8 Input to GND) Rev.2 | Page 8 of 12 | www.onsemi.com CM1622 Typical Diode Capacitance vs. Input Voltage Figure 9. Filter Capacitance vs. Input Voltage (normalized to capacitance at 2.5VDC and 25°C) Rev. 2 | Page 9 of 12 | www.onsemi.com CM1622 Mechanical Details NuDFN-16 Mechanical Specifications, 0.4mm Dimensions for the CM1622 supplied in a 16-lead, 0.4mm pitch NuDFN package are presented below. * This package is compliant with JEDEC standard MO-229C with the exception of the D, D2, E, E2, and L dimensions as called out in the table above. PACKAGE DIMENSIONS Package NuDFN JEDEC No. MO-229C* Leads 16 Millimeters Inches Dim. Min Nom Max Min Nom Max A 0.45 0.50 0.55 0.018 0.020 0.022 A1 0.00 0.02 0.05 0.000 0.001 0.002 0.127 REF A3 b 0.15 0.20 0.005 REF 0.25 0.006 .20 BSC b1 0.008 0.010 0.008 BSC D 3.40 3.50 3.60 0.134 0.138 0.142 D2 2.70 2.80 2.90 0.106 0.110 0.114 E 1.10 1.20 1.30 0.043 0.047 0.051 E2 0.20 0.30 0.40 0.008 0.012 0.016 e 0.400 BSC 0.016 BSC F 0.20 REF 0.008 REF F1 0.30 REF 0.012 REF K 0.20 REF 0.008 REF L L2 # per tape and reel 0.20 0.25 0.30 0.008 0.15 REF 0.010 0.012 0.006 REF Dimensions for 16-Lead, 0.4mm pitch NuDFN Package 3000 pieces Controlling dimension: millimeters Rev.2 | Page 10 of 12 | www.onsemi.com CM1622 Tape and Reel Specifications PART NUMBER PACKAGE SIZE (mm) POCKET SIZE (mm) B0 X A0 X K0 TAPE WIDTH W REEL DIAMETER QTY PER REEL P0 P1 CM1622 3.50 X 1.20 X 0.50 3.75 X 1.45 X 0.70 12mm 178mm (7") 3000 4mm 4mm Rev. 2 | Page 11 of 12 | www.onsemi.com CM1622 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.  PUBLICATION ORDERING INFORMATION  LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com  N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support:  Phone: 421 33 790 2910 Japan Customer Focus Center  Phone: 81-3-5773-3850    Rev.2 | Page 12 of 12 | www.onsemi.com ON Semiconductor Website: www.onsemi.com    Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative