CM1636-06DE

4-, 6- and 8-Channel EMI Filter Arrays with ESD Protection CM1636 Features • • • • • • Four, six and eight channels of EMI filtering with integrated ESD protection Pi-style EMI filters in a capacitor-resistorcapacitor (C-R-C) network ±15kV ESD protection on each channel (IEC 61000-4-2 Level 4, contact discharge) ±30kV ESD protection on each channel (HBM) Greater than 30dB of attenuation from 800MHz to 3GHz UDFN package with 0.40mm lead pitch: •4-ch. = 8-lead UDFN •6-ch. = 12-lead UDFN •8-ch. = 16-lead UDFN Tiny UDFN package size: • 8-lead: 1.7mm x 1.35mm x 0.50mm • 12-lead: 2.5mm x 1.35mm x 0.50mm • 16-lead: 3.3mm x 1.35mm x 0.50mm Increased robustness against vertical impacts during manufacturing process Lead-free finishing Product Description The CM1636 is an EMI filter array with ESD protection, which integrates either four, six or eight pi filters (C-R-C). Each CM1636 filter has component values of 15pF-200W-15pF. These parts include ESD protection diodes on every pin, providing a very high level of protection for sensitive electronic components that may be subjected to electrostatic discharge (ESD). The ESD diodes connected to the filter ports safely dissipate ESD strikes of ±15kV contact discharge, twice the specification requirement of the IEC 61000-4-2, Level 4 international standard. Using the MIL-STD-883 (Method 3015) specification for Human Body Model (HBM) ESD, the pins are protected for contact discharges at greater than ±30kV. This device is particularly well-suited for portable electronics (e.g. mobile handsets, PDAs, notebook computers) because of its small package and easyto-use pin assignments. In particular, the CM1636 is ideal for EMI filtering and protecting data lines from ESD in wireless handsets. The CM1636 is available in space-saving, ultra-lowprofile, 8-lead, 12-lead and 16-lead 0.4mm pitch UDFN packages. It is fabricated with California Micro Devices' CenturionTM process and available with leadfree finishing. • • • Applications • • • I/O port protection for mobile handsets, notebook computers, PDAs etc. EMI filtering for data ports in cell phones, PDAs or notebook computers. EMI filtering for LCD, camera and chip-to-chip data lines ©2010 SCILLC. All rights reserved. May 2010 – Rev. 2 Publication Order Number: CM1636/D CM1636 Electrical Schematic 1 of 4/6/8 EMI Filtering + ESD Channels Rev. 2 | Page 2 of 22 | www.onsemi.com CM1636 PIN DESCRIPTIONS Pins 163604Dx 1 2 3 4 163606Dx 1 2 3 4 5 6 163608Dx 1 2 3 4 5 6 7 8 GND Pad NAME FILTER1 FILTER2 FILTER3 FILTER4 FILTER5 FILTER6 FILTER7 FILTER8 GND DESCRIPTION Filter Channel 1 Filter Channel 2 Filter Channel 3 Filter Channel 4 Filter Channel 5 Filter Channel 6 Filter Channel 7 Filter Channel 8 Device Ground 163604Dx 8 7 6 5 Pins 163606Dx 12 11 10 9 8 7 163608Dx 16 15 14 13 12 11 10 9 NAME FILTER1 FILTER2 FILTER3 FILTER4 FILTER5 FILTER6 FILTER7 FILTER8 DESCRIPTION Filter Channel 1 Filter Channel 2 Filter Channel 3 Filter Channel 4 Filter Channel 5 Filter Channel 6 Filter Channel 7 Filter Channel 8 Ordering Information PART NUMBERING INFORMATION Lead-free Finish Leads/Pins 8 12 16 Package UDFN-08 UDFN-12 UDFN-16 Ordering Part Number1 CM1636-04DE CM1636-06DE CM1636-08DE Part Marking FE P36E P368E Note 1: Parts are shipped in Tape & Reel form unless otherwise specified. Rev. 2 | Page 3 of 22 | www.onsemi.com CM1636 Specifications ABSOLUTE MAXIMUM RATINGS PARAMETER Storage Temperature Range DC Power per Resistor Package DC Power Rating RATING -65 to +150 100 300 UNITS °C mW mW STANDARD OPERATING CONDITIONS PARAMETER Operating Temperature Range RATING -40 to +85 UNITS °C Rev. 2 | Page 4 of 22 | www.onsemi.com CM1636 ELECTRICAL OPERATING CHARACTERISTICS (SEE NOTE 1) SYMBOL R CTOTAL C VDIODE ILEAK VSIG PARAMETER Resistance Total Channel Capacitance At 2.5VDC Reverse Bias, 1MHz, 30mVAC At 2.5V DC, 1MHz, 30mV AC IDIODE = 10μA VDIODE = 3.3V CONDITIONS MIN 160 24 TYP 200 30 MAX 240 36 UNITS Ω pF Capacitance Diode Standoff Voltage Diode Leakage Current (reverse bias) Signal Voltage Positive Clamp Negative Clamp In-system ESD Withstand Voltage a) Human Body Model, MIL-STD883, Method 3015 b) Contact Discharge per IEC 61000-4-2 Level 4 Cut-off Frequency ZSOURCE=50Ω, ZLOAD=50Ω Absolute Attenuation @ 1GHz from 0dB Level 15 6.0 0.1 1 pF V μA ILOAD = 10mA ILOAD = -10mA Notes 2 5.6 -0.4 6.8 -0.8 V V VESD ±30 ±15 R = 200Ω, C = 15pF; Note 3 ZSOURCE = 50Ω, Z LOAD = 50Ω, DC Bias = 0V; Notes 1 and 3 ZSOURCE = 50Ω, Z LOAD = 50Ω, DC Bias = 0V; Notes 1 and 35 kV kV f C 100 35 MHz dB A1GHz A800MHz - 6GHz Absolute Attenuation @ 800MHz to 6GHz from 0dB Level 30 dB Note 1: TA=25°C unless otherwise specified. Note 2: ESD applied to input and output pins with respect to GND, one at a time. Note 3: Attenuation / RF curves characterized by a network analyzer using microprobes. Rev. 2 | Page 5 of 22 | www.onsemi.com CM1636 Performance Information Typical Filter Performance (TA=25°C, DC Bias=0V, 50 Ohm Environment) Figure 1. Insertion Loss vs. Frequency (FILTER1 Input to GND, CM1636-04DE) Figure 2. Insertion Loss vs. Frequency (FILTER2 Input to GND, CM1636-04DE) Rev. 2 | Page 6 of 22 | www.onsemi.com CM1636 Performance Information (cont’d) Typical Filter Performance (TA=25°C, DC Bias=0V, 50 Ohm Environment) Figure 3. Insertion Loss vs. Frequency (FILTER3 Input to GND, CM1636-04DE) Figure 4. Insertion Loss vs. Frequency (FILTER4 Input to GND, CM1636-04DE) Rev. 2 | Page 7 of 22 | www.onsemi.com CM1636 Performance Information (cont’d) Typical Filter Performance (TA=25°C, DC Bias=0V, 50 Ohm Environment) Figure 5. Insertion Loss vs. Frequency (FILTER1 Input to GND, CM1636-06DE) Figure 6. Insertion Loss vs. Frequency (FILTER2 Input to GND, CM1636-06DE) Rev. 2 | Page 8 of 22 | www.onsemi.com CM1636 Performance Information (cont’d) Typical Filter Performance (TA=25°C, DC Bias=0V, 50 Ohm Environment) Figure 7. Insertion Loss vs. Frequency (FILTER3 Input to GND, CM1636-06DE) Figure 8. Insertion Loss vs. Frequency (FILTER4 Input to GND, CM1636-06DE) Rev. 2 | Page 9 of 22 | www.onsemi.com CM1636 Performance Information (cont’d) Typical Filter Performance (TA=25°C, DC Bias=0V, 50 Ohm Environment) Figure 9. Insertion Loss vs. Frequency (FILTER5 Input to GND, CM1636-06DE) Figure 10. Insertion Loss vs. Frequency (FILTER6 Input to GND, CM1636-06DE) Rev. 2 | Page 10 of 22 | www.onsemi.com CM1636 Performance Information (cont’d) Typical Filter Performance (TA=25°C, DC Bias=0V, 50 Ohm Environment) Figure 11. Insertion Loss vs. Frequency (FILTER1 Input to GND, CM1636-08DE) Figure 12. Insertion Loss vs. Frequency (FILTER2 Input to GND, CM1636-08DE) Rev. 2 | Page 11 of 22 | www.onsemi.com CM1636 Performance Information (cont’d) Typical Filter Performance (TA=25°C, DC Bias=0V, 50 Ohm Environment) Figure 13. Insertion Loss vs. Frequency (FILTER3 Input to GND, CM1636-08DE) Figure 14. Insertion Loss vs. Frequency (FILTER4 Input to GND, CM1636-08DE) Rev. 2 | Page 12 of 22 | www.onsemi.com CM1636 Performance Information (cont’d) Typical Filter Performance (TA=25°C, DC Bias=0V, 50 Ohm Environment) Figure 15. Insertion Loss vs. Frequency (FILTER5 Input to GND, CM1636-08DE) Figure 16. Insertion Loss vs. Frequency (FILTER6 Input to GND, CM1636-08DE) Rev. 2 | Page 13 of 22 | www.onsemi.com CM1636 Performance Information (cont’d) Typical Filter Performance (TA=25°C, DC Bias=0V, 50 Ohm Environment) Figure 17. Insertion Loss vs. Frequency (FILTER7 Input to GND, CM1636-08DE) Figure 18. Insertion Loss vs. Frequency (FILTER8 Input to GND, CM1636-08DE) Rev. 2 | Page 14 of 22 | www.onsemi.com CM1636 Performance Information (cont’d) Figure 19. Filter Capacitance vs. Input Voltage over Temperature (normalized to capacitance at 2.5VDC and 25°C) Rev. 2 | Page 15 of 22 | www.onsemi.com CM1636 Mechanical Details UDFN-08 Mechanical Specifications Dimensions for the CM1636 supplied in a 8-lead, 0.4mm pitch UDFN package are presented below. PACKAGE DIMENSIONS Package JEDEC No. Leads Millimeters Dim. Min A A1 A3 b D D2 E E2 e K L # per tape and reel 0.15 0.15 1.60 1.10 1.25 0.30 0.45 0.00 Nom 0.50 0.02 0.127 REF 0.20 1.70 1.20 1.35 0.40 0.40 BSC 0.22 REF 0.25 0.35 0.25 1.80 1.30 1.45 0.50 Max 0.55 0.05 Min 0.018 0.000 Nom 0.020 0.001 Max 0.022 0.002 uDFN MO-229C* 8 Inches 0.005 REF 0.006 0.063 0.043 0.049 0.012 0.008 0.067 0.047 0.053 0.016 0.010 0.071 0.051 0.057 0.020 0.016 BSC 0.009 REF 0.006 0.010 0.014 3000 pieces Dimensions for 8-Lead, 0.4mm pitch uDFN package Controlling dimension: millimeters * This package is compliant with JEDEC standard MO-229C with the exception of the D, D2, E, E2, K and L dimensions as called out in the table above. Rev. 2 | Page 16 of 22 | www.onsemi.com CM1636 Tape and Reel Specifications PACKAGE SIZE (mm) 1.70 X 1.35 X 0.50 POCKET SIZE (mm) B0 X A0 X K0 1.95 X 1.60 X 0.60 TAPE WIDTH W 8mm REEL DIAMETER 178mm (7") QTY PER REEL 3000 PART NUMBER CM1636-04DE P0 4mm P1 4mm Rev. 2 | Page 17 of 22 | www.onsemi.com CM1636 Mechanical Details (cont’d) UDFN-12 Mechanical Specifications Dimensions for the CM1636 suplied in a 12-lead, 0.4mm pitch UDFN package are presented below. PACKAGE DIMENSIONS Package JEDEC No. Leads Millimeters Dim. Min A A1 A3 b D D2 E E2 e K L # per tape and reel 0.15 0.15 2.40 1.90 1.25 0.30 0.45 0.00 Nom 0.50 0.02 0.127 REF 0.20 2.50 2.00 1.35 0.40 0.40 BSC 0.22 REF 0.25 0.35 0.25 2.60 2.10 1.45 0.50 Max 0.55 0.05 Min 0.018 0.000 Nom 0.020 0.001 Max 0.022 0.002 uDFN MO-229C* 12 Inches 0.005 REF 0.006 0.094 0.075 0.049 0.012 0.008 0.098 0.079 0.053 0.016 0.010 0.102 0.083 0.057 0.020 0.016 BSC 0.009 REF 0.006 0.010 0.014 3000 pieces Dimensions for 12-Lead, 0.4mm pitch uDFN package Controlling dimension: millimeters * This package is compliant with JEDEC standard MO-229C with the exception of the D, D2, E, E2, K and L dimensions as called out in the table above. Rev. 2 | Page 18 of 22 | www.onsemi.com CM1636 Tape and Reel Specifications PACKAGE SIZE (mm) 2.50 X 1.35 X 0.50 POCKET SIZE (mm) B0 X A0 X K0 2.75 X 1.60 X 0.60 TAPE WIDTH W 8mm REEL DIAMETER 178mm (7") QTY PER REEL 3000 PART NUMBER CM1636-06DE P0 4mm P1 4mm Rev. 2 | Page 19 of 22 | www.onsemi.com CM1636 Mechanical Details (cont’d) UDFN-16 Mechanical Specifications Dimensions for the CM1636 suplied in a 16-lead, 0.4mm pitch UDFN package are presented below. The 16-lead, 0.4mm pitch uDFN package dimensions are presented below. PACKAGE DIMENSIONS Package JEDEC No. Leads Millimeters Dim. Min A A1 A3 b D D2 E E2 e K L # per tape and reel 0.15 0.15 3.20 2.70 1.25 0.30 0.45 0.00 Nom 0.50 0.02 0.127 REF 0.20 3.30 2.80 1.35 0.40 0.40 BSC 0.22 REF 0.25 0.35 0.25 3.40 2.90 1.45 0.50 Max 0.55 0.05 Min 0.018 0.000 Nom 0.020 0.001 Max 0.022 0.002 uDFN MO-229C* 16 Inches 0.005 REF 0.006 0.126 0.106 0.049 0.012 0.008 0.130 0.110 0.053 0.016 0.010 0.134 0.114 0.057 0.020 0.016 BSC 0.009 REF 0.006 0.010 0.014 3000 pieces Controlling dimension: millimeters * Dimensions for 16-Lead, 0.4mm pitch uDFN package This package is compliant with JEDEC standard MO-229C with the exception of the D, D2, E, E2, K and L dimensions as called out in the table above. Rev. 2 | Page 20 of 22 | www.onsemi.com CM1636 Tape and Reel Specifications PACKAGE SIZE (mm) 3.30 X 1.35 X 0.50 POCKET SIZE (mm) B0 X A0 X K0 3.50 X 1.55 X 0.70 TAPE WIDTH W 12mm REEL DIAMETER 178mm (7") QTY PER REEL 3000 PART NUMBER CM1636-08DE P0 4mm P1 4mm Rev. 2 | Page 21 of 22 | www.onsemi.com CM1636 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative Rev. 2 | Page 22 of 22 | www.onsemi.com