L-C LCD and Camera EMI
Filter Array with ESD
Protection
CM1693-04DE,
CM1693-06DE,
CM1693-08DE
www.onsemi.com
Product Description
The CM1693 is a family of pi−style EMI filter arrays with ESD
protection, which integrates four, six or eight filters (C−L−C) into
a small−form factor, uDFN 0.40 mm pitch package. Each EMI filter
channel is implemented as a 3−pole L−C filter, where the component
values are 10 pF−26 nH−12 pF. The CM1693’s roll−off frequency at
−6 dB attenuation is 300 MHz and can be used in applications where
the data rates are as high as 140 Mbps. The CM1693 also provides
greater than −30 dB attenuation over the 800 MHz to 6 GHz frequency
range. The device includes ESD diodes on every pin that provide
a very high level of protection for sensitive electronic components
against possible electrostatic discharge (ESD). The ESD protection
diodes connected to the filter ports are designed and characterized to
safely dissipate ESD strikes of ±18 kV, which is beyond the maximum
requirement of the IEC61000−4−2 international standard.
This device is particularly well suited for wireless handsets, mobile
LCD modules and PDAs because of its small package format and
easy−to−use pin assignments. In particular, the CM1693 is ideal for
EMI filtering and protecting data and control lines for the LCD display
and camera interface in mobile handsets.
The CM1693 is housed in space saving, low profile, 0.40 mm pitch
uDFN packages in a RoHS compliant, Pb−Free format.
Features
• 4, 6 or 8 Channels of EMI Filtering with Integrated ESD Protection
• Pi−Style EMI Filters in a Capacitor−Inductor−Capacitor (C−L−C)
•
•
•
•
•
•
Network
+18 kV ESD Protection on Each Channel
(IEC 61000−4−2 Level 4, Contact Discharge)
Greater than −35 dB Attenuation (Typical) at 1GHz
uDFN Lead−Free Package with 0.40 mm Lead Pitch:
♦ 4−Ch. = 8−Lead uDFN
♦ 6−Ch. = 12−Lead uDFN
♦ 8−Ch. = 16−Lead uDFN
uDFN Package size:
♦ 8−Lead: 1.70 mm x 1.35 mm
♦ 12−Lead: 2.50 mm x 1.35 mm
♦ 16−Lead: 3.30 mm x 1.35 mm
Increased Robustness Against Vertical Impacts During
Manufacturing Process
These Devices are Pb−Free and are RoHS Compliant
1
16
1
uDFN8
DE SUFFIX
CASE 517BC
1
uDFN12
DE SUFFIX
CASE 517BD
uDFN16
DE SUFFIX
CASE 517BE
ELECTRICAL SCHEMATIC
26 nH
Filter +
ESDn*
10 pF
Filter +
ESDn*
12 pF
GND
1 of 4, 6 or 8 EMI/RFI Filter Channels
with Integrated ESD protection
* See Package/Pinout Diagram for expanded pin information
MARKING DIAGRAM
P93 MG
G
1
P936 MG
G
P938 MG
G
1
1
XXXX = Specific Device Code
M
= Month Code
G
= Pb−Free Package
(Note: Microdot may be in either location)
Package
Shipping†
CM1693−04DE
uDFN−8
(Pb−Free)
3000/Tape & Reel
CM1693−06DE
uDFN−12
(Pb−Free)
3000/Tape & Reel
CM1693−08DE
uDFN−16
(Pb−Free)
3000/Tape & Reel
Device
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
• Handheld PCs/PDAs
• LCD and Camera Modules
• EMI Filtering for Data Ports in Cell Phones, PDAs
• LCD and Camera Data Lines in Mobile Handsets
• I/O Port Protection for Mobile Handsets, Notebook
or Notebook Computers.
Computers, PDAs etc.
November, 2020 − Rev. 4
12
ORDERING INFORMATION
Applications
© Semiconductor Components Industries, LLC, 2013
8
• Wireless Handsets
1
Publication Order Number:
CM1693/D
CM1693−04DE, CM1693−06DE, CM1693−08DE
PACKAGE / PINOUT DIAGRAMS
Table 1. PIN DESCRIPTIONS
Device Pin(s)
TOP VIEW
(Pins Down View)
−04
−06
−08
Name
1; 8
1; 12
1; 16
FILTER1
Filter + ESD Channel 1
2; 7
2; 11
2; 15
FILTER2
Filter + ESD Channel 2
3; 6
3; 10
3; 14
FILTER3
Filter + ESD Channel 3
4; 5
4; 9
4; 13
FILTER4
Filter + ESD Channel 4
5; 8
5; 12
FILTER5
Filter + ESD Channel 5
6; 7
6; 11
FILTER6
Filter + ESD Channel 6
7; 10
FILTER7
Filter + ESD Channel 7
8; 9
FILTER8
Filter + ESD Channel 8
GND PAD
Description
GND
8
7
6
BOTTOM VIEW
(Pins Up View)
5
P93
(x)
Single Digit
Date Code
1
2
Pin 1
Marking
3
12 11 10 9
Single Digit
Date Code
8
4
8
CM1693−04DE
8−Lead uDFN Package
Bottom View
(Pins Up View)
1
7
P936(x)
1
2
3
4
2
3
4
5
6
8
7
GND PAD
5
6
12 11 10 9
Pin 1
Marking
CM1693−06DE
12−Lead uDFN Package
BOTTOM VIEW
(Pins Up View)
TOP VIEW
(Pins Down View)
Single Digit
Date Code
16 15 14
13 12 11
10
9
1
2
3
P938 (x)
Pin 1
Marking
1
2
3
4
5
6
4
5
6
7
8
13 12 11
10
9
GND PAD
7
16 15 14
8
CM1693−08DE
16−Lead uDFN Package
www.onsemi.com
2
3
4
GND PAD
Device Ground
Top View
(Pins Down View)
2
1
7
6
5
CM1693−04DE, CM1693−06DE, CM1693−08DE
SPECIFICATIONS
Table 2. ABSOLUTE MAXIMUM RATINGS
Parameter
Rating
Units
–65 to +150
°C
Current per Inductor
30
mA
DC Package Power Rating
500
mW
Storage Temperature Range
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
Table 3. STANDARD OPERATING CONDITIONS
Parameter
Operating Temperature Range
Rating
Units
–40 to +85
°C
Table 4. ELECTRICAL OPERATING CHARACTERISTICS (Note 1)
Symbol
L
Parameter
Conditions
Min
Channel Inductance
Typ
26
CTOTAL
Total Channel Capacitance (Note 4)
At 2.5 VDC Reverse Bias,
1 MHz, 30 mVAC
17.6
VDIODE
Standoff Voltage
IDIODE = 10 mA
5.5
ILEAK
Diode Leakage Current (reverse bias)
VDIODE = +3.3 V
VSIG
Signal Clamp Voltage
Positive Clamp
Negative Clamp
ILOAD = 10 mA
ILOAD = –10 mA
VESD
In−system ESD Withstand Voltage
Contact Discharge per IEC 61000−4−2 Level 4
RDYN
Dynamic Resistance
Positive
Negative
2.3
0.9
Roll−off Frequency at −6 dB Attenuation
ZSOURCE = 50 W, ZLOAD = 50 W
300
fR
Max
(Notes 2, 3 and 4)
5.6
–1.5
22
Units
nH
26.4
pF
V
0.1
1.0
6.8
–0.8
9.0
−0.4
mA
V
kV
±18
W
MHz
1. TA = 25°C unless otherwise specified.
2. ESD applied to input and output pins with respect to GND, one at a time.
3. Clamping voltage is measured at the opposite side of the EMI filter to the ESD pin (i.e. if ESD is applied to pin A1 then clamping voltage is
measured at pin C1). Unused pins are left open.
4. These parameters are guaranteed by design and characterization.
www.onsemi.com
3
CM1693−04DE, CM1693−06DE, CM1693−08DE
PERFORMANCE INFORMATION
Typical Filter Performance (TA = 25°C, DC Bias = 0 V, 50 Ohm Environment)
Figure 1. Typical Filter Insertion Loss (CM1693)
Typical Diode Capacitance vs. Input Voltage
Figure 2. Filter Capacitance vs. Input Voltage
(Normalized to Capacitance at 0 VDC and 25°C)
www.onsemi.com
4
CM1693−04DE, CM1693−06DE, CM1693−08DE
MECHANICAL DETAILS
uDFN−08, uDFN−12 and uDFN−16 Mechanical Specifications, 0.4mm
The 8−lead, 12−lead and 16−lead, 0.4 mm pitch uDFN package dimensions are presented below.
Table 5. TAPE AND REEL SPECIFICATIONS
Pocket Size (mm)
Tape Width†
Package Size (mm)
B0 x A0 x K0
W
Reel
Diameter
Qty per
Reel
P0
P1
CM1693−04DE
1.70 x 1.35 x 0.50
1.95 x 1.60 x 0.60
8 mm
178 mm (7″)
3000
4 mm
4 mm
CM1693−06DE
2.50 x 1.35 x 0.50
2.75 x 1.60 x 0.60
8 mm
178 mm (7″)
3000
4 mm
4 mm
CM1693−08DE
3.30 x 1.35 x 0.50
3.50 x 1.55 x 0.70
12 mm
178 mm (7″)
3000
4 mm
4 mm
Part Number
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specification Brochure, BRD8011/D.
10 Pitches Cumulative
P0
Top
Î
Î
Î
Î
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
Tolerance On Tape
±0.2 mm
Cover
Tape
K0
For Tape Feeder Reference
Only Including Draft
Concentric Around B
A0
W
B0
Embossment
P1
User Direction of Feed
www.onsemi.com
5
Center Lines
of Cavity
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
UDFN8, 1.7x1.35, 0.4P
CASE 517BC
ISSUE A
8
1
SCALE 4:1
DATE 11 AUG 2022
GENERIC
MARKING DIAGRAMS*
1
XX MG
G
1
XXXMG
G
XXX = Specific Device Code
M
= Date Code
G
= Pb−Free Package
(Note: Microdot may be in either location)
*This information is generic. Please refer to
device data sheet for actual part marking.
Pb−Free indicator, “G” or microdot “G”, may
or may not be present. Some products may
not follow the Generic Marking.
DOCUMENT NUMBER:
DESCRIPTION:
98AON47060E
UDFN8, 1.7x1.35, 0.4P
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 1
onsemi and
are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves
the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular
purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation
special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
UDFN12, 2.5x1.35, 0.4P
CASE 517BD−01
ISSUE O
12
1
DATE 18 NOV 2009
SCALE 4:1
A
B
D
2X
0.10 C
PIN ONE
REFERENCE
2X
L1
ÉÉÉ
ÉÉÉ
0.10 C
DETAIL A
E
OPTIONAL
CONSTRUCTIONS
TOP VIEW
DETAIL B
(A3)
A1
0.05 C
NOTE 4
A1
SIDE VIEW
12X
6
1
C
SEATING
PLANE
MOLD CMPD
DETAIL B
OPTIONAL
CONSTRUCTION
DETAIL A
D2
L
ÇÇ
ÇÇ
ÉÉ
EXPOSED Cu
A
0.05 C
12X
L
L
A3
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSION b APPLIES TO PLATED TERMINAL
AND IS MEASURED BETWEEN 0.15 AND
0.25 mm FROM THE TERMINAL TIP.
4. COPLANARITY APPLIES TO THE EXPOSED
PAD AS WELL AS THE TERMINALS.
DIM
A
A1
A3
b
D
D2
E
E2
e
K
L
L1
MILLIMETERS
MIN
MAX
0.45
0.55
0.00
0.05
0.13 REF
0.15
0.25
2.50 BSC
1.90
2.10
1.35 BSC
0.30
0.50
0.40 BSC
0.15
−−−
0.20
0.30
−−−
0.05
GENERIC
MARKING DIAGRAM*
E2
XX MG
G
12
K
7
e
12X
1
b
XX
= Specific Device Code
M
= Month Code
G
= Pb−Free Package
(Note: Microdot may be in either location)
0.10 C A B
BOTTOM VIEW
0.05 C
NOTE 3
*This information is generic. Please refer
to device data sheet for actual part
marking.
Pb−Free indicator, “G” or microdot “ G”,
may or may not be present.
RECOMMENDED
SOLDERING FOOTPRINT*
PACKAGE
OUTLINE
12X
2.20
0.40
1.55
0.50
12X
0.40
PITCH
0.25
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
DOCUMENT NUMBER:
DESCRIPTION:
98AON47061E
UDFN12, 2.5X1.35, 0.4P
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
UDFN16, 3.3x1.35, 0.4P
CASE 517BE−01
ISSUE O
16
DATE 18 NOV 2009
1
SCALE 4:1
A
B
D
2X
0.10 C
PIN ONE
REFERENCE
2X
0.10 C
L1
ÉÉÉ
ÉÉÉ
DETAIL A
E
OPTIONAL
CONSTRUCTIONS
TOP VIEW
EXPOSED Cu
A
DETAIL B
0.05 C
(A3)
16X
A1
0.05 C
NOTE 4
16X
A1
SIDE VIEW
SEATING
PLANE
C
8
1
ÇÇ
ÇÇ
ÉÉ
MOLD CMPD
DETAIL B
OPTIONAL
CONSTRUCTION
DETAIL A
D2
L
L
L
A3
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSION b APPLIES TO PLATED TERMINAL
AND IS MEASURED BETWEEN 0.15 AND
0.25 mm FROM THE TERMINAL TIP.
4. COPLANARITY APPLIES TO THE EXPOSED
PAD AS WELL AS THE TERMINALS.
DIM
A
A1
A3
b
D
D2
E
E2
e
K
L
L1
MILLIMETERS
MIN
MAX
0.45
0.55
0.00
0.05
0.13 REF
0.15
0.25
3.30 BSC
2.70
2.90
1.35 BSC
0.30
0.50
0.40 BSC
0.15
−−−
0.20
0.30
−−−
0.05
GENERIC
MARKING DIAGRAM*
E2
XX MG
G
K
16
9
e
16X
1
b
XX
= Specific Device Code
M
= Month Code
G
= Pb−Free Package
(Note: Microdot may be in either location)
0.10 C A B
BOTTOM VIEW
0.05 C
NOTE 3
RECOMMENDED
SOLDERING FOOTPRINT*
PACKAGE
OUTLINE
3.00
*This information is generic. Please refer
to device data sheet for actual part
marking.
Pb−Free indicator, “G” or microdot “ G”,
may or may not be present.
16X
0.40
1.55
0.50
16X
0.40
PITCH
0.25
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
DOCUMENT NUMBER:
DESCRIPTION:
98AON47062E
UDFN16, 3.3X1.35, 0.4P
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
onsemi Website: www.onsemi.com
◊
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative
