CNW11AV2SD

HIGH VOLTAGE 6-PIN PHOTOTRANSISTOR OPTOCOUPLERS CNW11AV-1 CNW11AV-2 CNW11AV-3 DESCRIPTION The CNW11AV series are high voltage optocouplers in a wide body dual-in-line package (DIP). Each optocoupler consists of a GaAs infrared emitter optically coupled to a silicon npn phototransistor with the base connected. 6 1 FEATURES 6 • Minimum 2 mm isolation thickness between emitter and receiver • A wide body encapsulation with a pin distance of 10.16 mm 1 • An external clearance 0f 9.6 mm minimum and an external SCHEMATIC creepage of 10 mm minimum 1 6 2 5 • High current transfer ratio and low saturation voltage, making the device suitable for use with TTL integrated circuits 3 4 NC • High degree of AC and DC insulation (4000 V (RMS) and CNW11AV-1/2/3 5656 V (DC)) • Collector-emitter breakdown Voltage: 70 V PIN 1. ANODE 2. CATHODE 3. NO CONNECTION 4. EMITTER 5. COLLECTOR 6. BASE • Low isolation capacitance of 0.5 pF maximum • UL recognized (File # E90700) • VDE recognized (File # 76876) - Ordering option ‘300’ (e.g. CNW11AV-1.300) ABSOLUTE MAXIMUM RATINGS Parameter Symbol Value Units TSTG -55 to 150 °C Ambient Operating Temperature Range TOPR -40 to 100 Lead Soldering Temperature Junction Temperature TSOL TJ 260 for 10 sec 125 °C °C IF 100 mA IF(pk) 3 A VR 6 V TOTAL DEVICE Storage Temperature Range EMITTER Forward Current - Continuous Forward Current - Peak (ton = 10µs, δ = 0.01) Reverse Voltage Total Power Dissipation @ TA = 25°C °C 200 mW 2.0 mW/°C IC 100 mA Emitter-Collector Voltage Collector-Emitter Voltage VECO VCEO 7 V 70 V Collector-Base Voltage Total Power Dissipation @ TA = 25°C VCBO 70 200 V mW 2.0 mW/°C PD Derate Linearly From 25°C DETECTOR Collector Current-Continuous PD Derate Linearly From 25°C  2001 Fairchild Semiconductor Corporation DS300398 6/04/01 1 OF 7 www.fairchildsemi.com HIGH VOLTAGE 6-PIN PHOTOTRANSISTOR OPTOCOUPLERS CNW11AV-1 ELECTRICAL CHARACTERISTICS CNW11AV-2 CNW11AV-3 (TA =25°C Unless otherwise specified) Parameter Test Conditions EMITTER Input Forward Voltage Symbol Min Typ Max Unit 0.8 1.15 VF 0.9 — 1.50 1.70 V IF = 10 mA IF = 10 mA, TA = -55°C 0.7 — 1.40 VR = 6.0 V IR — — 10 µA VI = 0, f = 1 MHz CJ — 25 100 pF IC = 1.0 mA BVCEO 70 — — V IC = 0.1 mA IE = 0.1 mA BVCBO 70 — — V IF = 10 mA, TA = 100°C Reverse Leakage Current Input Capacitance DETECTOR Collector-Emitter Breakdown Voltage Collector-Base Breakdown Voltage Emitter-Collector Breakdown Voltage Emitter-Base Breakdown Voltage Collector-Emitter Dark Current BVECO 7 — — V IE = 0.1 mA VCE = 10 V, IF = 0, TA = 25°C VCE = 10 V, IF = 0, TA = 70°C BVEBO 7 — — 0.5 — 50 V nA — — 10 µA IF = 0, VCB = 10 V ICBO — — 20 nA Test Conditions Symbol Min Typ Max Units Collector-Base Cut-off Current ICEO ISOLATION CHARACTERISTICS Characteristic DC Value, Time = 1 min. Input-Output Isolation Voltage Isolation Resistance VI-O = ±500 VDC V = 0V, f = 1 MHz Isolation Capacitance Output Capacitance 5,656 V 4,000 1 10 0.3 CISO CO 0.5 T! pF pF 4.5 (TA = 25°C Unless otherwise specified.) Test Conditions Symbol Output/Input Current Transfer Ratio IF = 10 mA, VCE = 10 V CTR Collector-Emitter Saturation Voltage IF = 20 mA, IC = 2 mA VCE(SAT) CMRR Common Mode Rejection Ratio AC Characteristics RISO VCB = 10 V, f = 1 MHz TRANSFER CHARACTERISTICS DC Characteristics VISO RMS Value, Time = 1 min. IC= 2mA,VCC=5V, f=10kHz, R=1kV Test Conditions Device Min CNW11AV-1 100 CNW11AV-2 CNW11AV-3 All 50 20 Typ % 0.4 V Typ Max Units -60 Min Units 300 0.1 All Max dB Symbol Device ton All 3 15 µs toff All 2.5 15 µs 6/04/01 DS300398 Saturated Switching Times Turn-On Time (fig. 2 & 3) Turn-Off Time (fig. 2 & 3) www.fairchildsemi.com IC= 2 mA, VCC= 10V, RL=100! 2 OF 7 HIGH VOLTAGE 6-PIN PHOTOTRANSISTOR OPTOCOUPLERS CNW11AV-1 CNW11AV-2 CNW11AV-3 VI VI A +VCC 0 +VCC VO 90% VO 10% 0 RL 50Ω ton WORKING VOLTAGE toff Fig. 1 Test Circuit Fig. 2 Switching Circuit Fig. 3 Waveforms Fig. 5 Normalized CTR vs. Forward Current Fig. 4 LED Forward Voltage vs. Forward Current 1.4 1.8 VCE = 5.0V Normalized to I F = 10mA TA = 25˚C 1.7 1.2 1.6 NORMALIZED CTR VF - FORWARD VOLTAGE (V) 1.0 1.5 1.4 TA = - 55oC 1.3 0.8 0.6 TA = 25oC 0.4 TA = 100oC 0.2 1.2 1.1 0.0 0 1.0 1 10 100 5 10 15 20 FORWARD CURRENT - I F (mA) IF - LED FORWARD CURRENT (mA) Fig. 7 CTR vs. RBE (Unsaturated) Fig. 6 Normalized CTR vs. Temperature 1.0 1.6 0.9 1.4 0.8 IF = 5mA I F = 20mA NORMALIZED CTR NORMALIZED CTR 0.7 1.2 IF = 10mA 1.0 0.6 I F = 10mA 0.5 0.4 I F = 5mA 0.3 0.8 0.2 IF = 20mA VCE = 5V, TA = 25˚C 0.1 Normalized to CTR at RBE = Open 0.6 Normalized to I F = 10 mA 0.0 10 100 1000 TA = 25˚C 0.4 -75 -50 -25 0 25 50 75 100 RBE - BASE RESISTANCE (k Ω) 125 o AMBIENT TEMPERATURE - TA ( C) DS300398 6/04/01 3 OF 7 www.fairchildsemi.com HIGH VOLTAGE 6-PIN PHOTOTRANSISTOR OPTOCOUPLERS CNW11AV-1 CNW11AV-2 Fig. 8 CTR vs. RBE (Saturated) Fig. 9 Normalized ton vs. RBE 6.0 1.0 CNW11AV-3 5.5 0.9 5.0 4.5 0.8 NORMALIZED ton NORMALIZED CTR I F = 20mA 0.7 0.6 I F = 10mA 0.5 0.4 3.5 3.0 2.5 2.0 1.5 I F = 5mA 0.3 0.2 1.0 VCC = 10V IC = 2mA 0.5 RL = 100Ω NORMALIZED TO t on AT RBE = OPEN 0.0 VCE = 0.3V, TA = 25˚C 0.1 4.0 10 Normalized to CTR at RBE = Open 100 1000 10000 RBE - BASE RESISTANCE (k Ω) 0.0 10 100 1000 RBE - BASE RESISTANCE (k Ω) Fig. 11 Switching Speed vs. Load Resistor 1000 I F = 10mA Fig. 10 Normalized toff vs. RBE 1.4 1.3 o TA = 25 C I C = 2mA 100 R L = 100 Ω NORMALIZED TO t off 1.1 AT RBE = OPEN SWITCHING SPEED - (µs) 1.2 NORMALIZED t off VCC = 10V VCC = 10V 1.0 0.9 0.8 0.7 0.6 0.5 Toff Tf 10 Ton 0.4 Tr 1 0.3 0.2 0.1 10 100 1000 10000 RBE - BASE RESISTANCE (k Ω) 0.1 0.1 1 Fig. 12 Collector-Emitter Saturation Voltage vs Collector Current 10 100 R-LOAD RESISTOR (kΩ) 100 Fig. 13 Dark Current vs. Ambient Temperature 1e+1 VCE = 10V COLLECTOR-EMITTER DARK CURRENT - I CEO (µA) 10 VCEsat - (V) 1 IF = 2.5mA 0.1 IF = 10mA 0.01 IF = 20mA IF = 5mA TA =25oC 0.001 0.01 1e+0 1e-1 1e-2 1e-3 1e-4 1e-5 0.1 1 10 IC - (mA) 1e-6 0 25 50 75 100 125 AMBIENT TEMPERATURE - T A (oC) www.fairchildsemi.com 4 OF 7 6/04/01 DS300398 HIGH VOLTAGE 6-PIN PHOTOTRANSISTOR OPTOCOUPLERS CNW11AV-1 Package Dimensions (Through Hole) CNW11AV-2 CNW11AV-3 Package Dimensions (Surface Mount) PIN 1 ID. PIN 1 ID. 0.354 (9.00) TYP SEATING PLANE 0.354 (9.00) TYP SEATING PLANE 0.350 (8.90) MAX 0.070 (1.78) 0.045 (1.14) 0.200 (5.08) 0.135 (3.43) 0.020 [0.51] 0.350 (8.90) MAX 0.020 (0.51) MIN 0.200 (5.08) 0.165 (4.18) 0.154 (3.90) 0.120 (3.05) 0.022 (0.56) 0.016 (0.41) 0.496 [12.60] 0.070 (1.78) 0.045 (1.14) 0.016 (0.40) 0.008 (0.20) 0° to 15° 0.400 (10.16) TYP 0.022 (0.56) 0.016 (0.41) 0.100 (2.54) TYP 0.016 (0.40) MIN 0.016 (0.40) 0.008 (0.20) 0.100 (2.54) TYP NOTE All dimensions are in inches (millimeters) DS300398 6/04/01 5 OF 7 www.fairchildsemi.com HIGH VOLTAGE 6-PIN PHOTOTRANSISTOR OPTOCOUPLERS CNW11AV-1 CNW11AV-2 CNW11AV-3 ORDERING INFORMATION Order Entry Identifier Option S Description .S Surface Mount Lead Bend SD .SD Surface Mount; Tape and reel 300 .300 VDE 0884 Carrier Tape Specifications (“D” Taping Orientation) 16.0 ± 0.1 5.00 ± 0.20 4.0 ± 0.1 0.30 ± 0.05 4.0 ± 0.1 Ø1.55 ± 0.05 1.75 ± 0.10 7.5 ± 0.1 16.0 ± 0.3 13.20 ± 0.20 9.4 ± 0.20 0.1 MAX 13.00 ± 0.20 Ø1.6 ± 0.1 User Direction of Feed NOTE All dimensions are in inches (millimeters) www.fairchildsemi.com 6 OF 7 6/04/01 DS300398 HIGH VOLTAGE 6-PIN PHOTOTRANSISTOR OPTOCOUPLERS CNW11AV-1 CNW11AV-2 CNW11AV-3 DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body,or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in labeling, can be reasonably expected to result in a significant injury of the user. DS300398 6/04/01 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 7 OF 7 www.fairchildsemi.com