CPH6531-TL-E

Ordering number : ENA0521A CPH6531 Bipolar Transistor http://onsemi.com –50V, –1A, Low VCE(sat) PNP Dual CPH6 Applications • Relay drivers, lamp drivers, motor drivers, flash Features • • • Composite type with two PNP transistors contained in one package facilitating high-density mounting The two chips contained are equivalent to the CPH3116 Ultrasmall package permitting applied sets to be small and slim Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Collector-to-Base Voltage Conditions Ratings Unit VCBO VCES -50 V -50 V VCEO VEBO -50 V -5 V -1.0 A Collector Current (Pulse) IC ICP Base Current IB -200 mA Collector Dissipation When mounted on ceramic substrate (600mm2×0.8mm) 1unit 0.9 W Total Power Dissipation PC PT When mounted on ceramic substrate (600mm2×0.8mm) 1.1 W Junction Temperature Tj 150 °C Storage Temperature Tstg -55 to +150 °C Collector-to-Emitter Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current -2 A Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Package Dimensions Product & Package Information unit : mm (typ) 7018A-006 • Package : CPH6 • JEITA, JEDEC : SC-74, SOT-26, SOT-457 • Minimum Packing Quantity : 3,000 pcs./reel 4 Packing Type: TL Marking 0.9 1 2 0.95 LOT No. ES 0.05 1.6 0.2 0.6 2.8 0.2 0.6 5 CPH6531-TL-E 0.15 2.9 6 TL 3 0.4 1 : Emitter1 2 : Base1 3 : Collector2 4 : Emitter2 5 : Base2 6 : Collector1 Electrical Connection 6 5 4 1 2 3 CPH6 Semiconductor Components Industries, LLC, 2013 August, 2013 62012 TKIM/11007EA TIIM TC-00000426 No. A0521-1/6 CPH6531 Electrical Characteristics at Ta=25°C Parameter Symbol Collector Cutoff Current ICBO IEBO hFE Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-On Time Storage Time Fall Time min typ VCE= -2V, IC= -100mA VCE= -10V, IC= -300mA VCE(sat)1 VCB= -10V, f=1MHz IC= -500mA, IB= -10mA VCE(sat)2 VBE(sat) V(BR)CBO Unit max VCB= -40V, IE=0A VEB= -4V, IC=0A fT Cob Output Capacitance Ratings Conditions 200 -0.1 μA -0.1 μA 560 420 MHz 9 pF -230 -380 mV IC= -300mA, IB= -6mA -125 -200 mV IC= -500mA, IB= -10mA -0.81 -1.2 V IC= -10μA, IE=0A -50 V V(BR)CES V(BR)CEO IC= -100μA, RBE=0Ω -50 V IC= -1mA, RBE=∞ -50 V V(BR)EBO ton IE= -10μA, IC=0A -5 tstg tf See specified Test Circuit. V 35 ns 170 ns 30 ns Switching Time Test Circuit IB1 PW=20μs D.C.≤1% IC VOUT IB2 VIN RB VR 50Ω RL + + 100μF 470μF VBE=5V VCC= --25V 20IB1= --20IB2=IC= --500mA Ordering Information Package Shipping memo CPH6 3,000pcs./reel Pb Free IC -- VCE A VCE= --2V A --0.7 A --10m A m --8 --6mA --0.6 --4mA --0.5 --2mA --0.4 --0.3 --0.2 --0.9 --0.8 --0.7 --0.6 --0.5 --0.4 --0.3 Ta=7 5°C mA --20m 0 --3 --0.8 Collector Current, IC -- A IC -- VBE --1.0 Collector Current, IC -- A 0m --0.9 --4 --50 mA --1.0 --0.2 --0.1 --0.1 IB=0mA 0 0 --0.1 --0.2 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 Collector-to-Emitter Voltage, VCE -- V --0.9 --1.0 IT11440 25°C --25°C Device CPH6531-TL-E 0 0 --0.1 --0.2 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 Base-to-Emitter Voltage, VBE -- V --0.9 --1.0 IT11415 No. A0521-2/6 CPH6531 hFE -- IC 1000 DC Current Gain, hFE Ta=75°C 3 2 --25°C 25°C 100 7 5 3 2 10 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 Collector Current, IC -- A 2 1000 7 5 3 2 100 7 5 3 2 --0.01 3 2 3 5 7 --0.1 2 3 5 7 --1.0 3 IT01649 VCE(sat) -- IC 5 f=1MHz IC / IB=20 Collector-to-Emitter Saturation Voltage, VCE(sat) -- V 7 5 Output Capacitance, Cob -- pF 2 Collector Current, IC -- A IT01647 Cob -- VCB 100 VCE= --10V 3 Gain-Bandwidth Product, f T -- MHz 7 5 f T -- IC 5 VCE= --2V 3 2 10 7 5 3 2 --0.1 7 5°C 5 7 Ta= 3 --25 °C °C 25 2 3 2 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 2 3 5 7 --100 IT01651 Collector-to-Base Voltage, VCB -- V 3 5 7 2 --0.1 3 IC / IB=50 3 2 --0.1 °C =75 Ta 7 C 25° °C --25 5 7 --1.0 IT11417 IC / IB=50 7 5 5 VBE(sat) -- IC --10 Base-to-Emitter Saturation Voltage, VBE(sat) -- V Collector-to-Emitter Saturation Voltage, VCE(sat) -- V 2 Collector Current, IC -- A VCE(sat) -- IC --1.0 7 --0.01 --0.01 5 3 2 --1.0 Ta= --25°C 7 75°C 5 25°C 3 2 3 2 --0.01 2 3 5 7 3 2 --0.1 5 --1.0 IT11419 Collector Current, IC -- A ICP= --2A 1m s DC 10 0m s er 2 ms op 10 3 ati on --0.1 7 5 3 2 Ta=25°C Single pulse Mounted on a ceramic board (600mm2✕0.8mm) --0.01 --0.1 2 3 5 7 2 --0.1 3 5 7 --1.0 IT01657 Mounted on a ceramic board (600mm2✕0.8mm) 1.2 IC= --1A Collector Dissipation, PC -- W --1.0 7 5 3 PC -- Ta 1.4 μs 100 0μs 50 Collector Current, IC -- A 2 2 Collector Current, IC -- A ASO 5 3 --0.1 --0.01 7 5 7 --1.0 2 3 5 7 --10 2 Collector-to-Emitter Voltage, VCE -- V 1.1 1.0 0.9 To ta 0.8 ld 1u nit 0.6 iss ipa tio n 0.4 0.2 0 3 5 7 IT11541 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT10764 No. A0521-3/6 CPH6531 Embossed Taping Specification CPH6531-TL-E No. A0521-4/6 CPH6531 Outline Drawing CPH6531-TL-E Land Pattern Example Mass (g) Unit 0.015 mm * For reference Unit: mm 2.4 1.4 0.6 0.95 0.95 No. A0521-5/6 CPH6531 ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No. A0521-6/6