CPH6636R-TL-W

Ordering number : ENA2224 CPH6636R N-Channel Power MOSFET 24V, 6A, 20mΩ, Dual CPH6 Common Drain http://onsemi.com Features • Low On-resistance • Best suited for LiB charging and discharging switch • With a built-in gate resistor • Protection diode in • 2.5V drive • Common-drain type • Halogen free compliance Specifications Absolute Maximum Ratings at Ta = 25°C Parameter Symbol Conditions Ratings Unit Drain to Source Voltage VDSS 24 V Gate to Source Voltage VGSS ±12 V Drain Current (DC) ID 6 A Drain Current (Pulse) IDP PW≤10μs, duty cycle≤1% 36 A Allowable Power Dissipation PD When mounted on ceramic substrate(900mm2×0.8mm) 1unit 0.9 W Total Dissipation PT When mounted on ceramic substrate(900mm2×0.8mm) 1.0 W Channel Temperature Tch 150 °C Storage Temperature Tstg - 55 to +150 °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Electrical Characteristics at Ta = 25°C Ratings Parameter Symbol Conditions Unit min typ max Drain to Source Breakdown Voltage V(BR)DSS ID=1mA, VGS=0V Zero-Gate Voltage Drain Current IDSS VDS=20V, VGS=0V 1 μA Gate to Source Leakage Current IGSS VGS=±8V, VDS=0V ±1 μA Cutoff Voltage VGS(off) VDS=10V, ID=1mA 1.3 V Forward Transfer Admittance | yfs | VDS=10V, ID=3A RDS(on)1 ID=3A, VGS=4.5V 12.8 16 20 mΩ RDS(on)2 ID=3A, VGS=4.0V 13.3 16.7 21.7 mΩ RDS(on)3 ID=3A, VGS=3.1V 14.6 18.3 25.6 mΩ RDS(on)4 ID=3A, VGS=2.5V 16.4 20.5 28.7 mΩ Static Drain to Source On-State Resistance Turn-ON Delay Time td(on) Rise Time tr Turn-OFF Delay Time 24 V 0.5 11 S 65 ns 300 ns td(off) 22000 ns Fall Time tf 98000 ns Total Gate Charge Qg 3 nC Gate to Source Charge Qgs Gate to Drain “Miller” Charge Qgd Diode Forward Voltage VSD See specified Test Circuit. VDS=10V, VGS=4.5V, ID=6A IS=6A, VGS=0V 1 nC 0.5 nC 0.78 1.2 V ORDERING INFORMATION See detailed ordering and shipping information on page 4 of this data sheet. Semiconductor Components Industries, LLC, 2013 October, 2013 O0913 TKIM TC-00003037 No. A2224-1/5 CPH6636R No.A2224-2/5 CPH6636R No.A2224-3/5 CPH6636R Package Dimensions CPH6636R-TL-W CPH6 CASE 318BD ISSUE O Unit : mm 1: Source1 2: Drain 3: Source2 4: Gate2 5: Drain 6: Gate1 Land Pattern Example 2.4 1.4 0.6 Device CPH6636R-TL-W Package CPH6, SC-74 SOT-26, SOT-457 Packing Type:TL Shipping note 3,000 pcs. / reel Pb-Free And Halogen Free Marking WX Ordering & Package Information 0.95 LOT No. 0.95 TL Electrical Connection 6 5 4 1 2 3 Switching Time Test Circuit No.A2224-4/5 CPH6636R Note on usage : Since the CPH6636R is a MOSFET product, please avoid using this device in the vicinity of highly charged objects. ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No.A2224-5/5