DA121TT1

DA121TT1G Silicon Switching Diode Features  These Devices are Pb--Free, Halogen Free/BFR Free and are RoHS Compliant http://onsemi.com MAXIMUM RATINGS (TA = 25C) Rating Symbol Max Unit Continuous Reverse Voltage VR 80 V Recurrent Peak Forward Current IF 200 mA IFM(surge) 500 mA Symbol Max Unit Peak Forward Surge Current Pulse Width = 10 ms 3 CATHODE 3 THERMAL CHARACTERISTICS Characteristic Total Device Dissipation, FR--4 Board (Note 1) TA = 25C Derated above 25C Thermal Resistance, Junction--to--Ambient (Note 1) Total Device Dissipation, FR--4 Board (Note 2) TA = 25C Derated above 25C Thermal Resistance, Junction--to--Ambient (Note 2) Junction and Storage Temperature Range PD 225 mW 1.8 mW/C 555 C/W 360 mW 2.9 mW/C RθJA 345 C/W TJ, Tstg --55 to +150 C RθJA PD Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. FR--4 @ Minimum Pad 2. FR--4 @ 1.0  1.0 Inch Pad 1 ANODE 1 2 SOT--416 / SC--75 CASE 463 STYLE 2 MARKING DIAGRAM 6A M G G 1 6A = Specific Device Code M = Date Code* G = Pb--Free Package (Note: Microdot may be in either location) *Date Code orientation and/or orientation may vary depending upon manufacturing location. ORDERING INFORMATION Device DA121TT1G Package Shipping† SOT--416 (Pb--Free) 3000 / Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.  Semiconductor Components Industries, LLC, 2010 October, 2010 -- Rev. 3 1 Publication Order Number: DA121TT1/D DA121TT1G ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) Symbol Min Max ----- 715 866 1000 1250 ---- 1.0 50 30 CD -- 2.0 pF trr -- 6.0 ns Stored Charge -- (IF = 10 mA to VR = 6.0 V, RL = 500 Ω) (Figure 2) QS -- 45 PC Forward Recovery Voltage -- (IF = 10 mA, tr = 20 ns) (Figure 3) VFR -- 1.75 V Characteristic Forward Voltage -(IF = 1.0 mA) (IF = 10 mA) (IF = 50 mA) (IF = 150 mA) VF Reverse Current -(VR = 75 V) (VR = 75 V, TJ = 150C) (VR = 25 V, TJ = 150C) IR Capacitance -- (VR = 0, f = 1.0 MHz) Reverse Recovery Time -- (IF = IR = 10 mA, RL = 50 Ω) (Figure 1) 1 ns MAX mV mA DUT 500 Ω t 10% Unit trr tif 50 Ω DUTY CYCLE = 2% 90% VF Irr 100 ns Figure 1. Reverse Recovery Time Equivalent Test Circuit VC 500 Ω DUT VCM 20 ns MAX D1 t 10% VCM = Qa C 243 pF 100 KΩ DUTY CYCLE = 2% OSCILLOSCOPE R  10 MΩ C  7 pF t 90% Vf BAW62 400 ns Figure 2. Recovery Charge Equivalent Test Circuit V 120 ns V 1 KΩ 450 Ω 90% DUT Vfr t 10% DUTY CYCLE = 2% 2 ns MAX Figure 3. Forward Recovery Voltage Equivalent Test Circuit http://onsemi.com 2 50 Ω DA121TT1G 10 IR , REVERSE CURRENT (A) IF, FORWARD CURRENT (mA) 100 10 TA = 85C TA = 25C 1.0 TA = -- 40C 0.1 0.2 0.4 0.6 0.8 1.0 VF, FORWARD VOLTAGE (VOLTS) TA = 125C 1.0 TA = 85C 0.1 TA = 55C 0.01 0.001 1.2 TA = 150C TA = 25C 0 10 Figure 4. Forward Voltage 20 30 40 VR, REVERSE VOLTAGE (VOLTS) 50 Figure 5. Leakage Current CD , DIODE CAPACITANCE (pF) 0.68 0.64 0.60 0.56 0.52 0 2 4 6 VR, REVERSE VOLTAGE (VOLTS) 8 r(t), NORMALIZED TRANSIENT THERMAL RESISTANCE Figure 6. Capacitance 1.0 0.1 D = 0.5 0.2 0.1 0.05 0.02 0.01 0.01 SINGLE PULSE 0.001 0.00001 0.0001 0.001 0.01 0.1 t, TIME (s) 1.0 Figure 7. Normalized Thermal Response http://onsemi.com 3 10 100 1000 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS SC−75/SOT−416 CASE 463−01 ISSUE G 3 1 2 DATE 07 AUG 2015 SCALE 4:1 −E− NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 2 3 b 3 PL 0.20 (0.008) e DIM A A1 b C D E e L HE −D− 1 M D HE C 0.20 (0.008) E A L MILLIMETERS MIN NOM MAX 0.70 0.80 0.90 0.00 0.05 0.10 0.15 0.20 0.30 0.10 0.15 0.25 1.55 1.60 1.65 0.70 0.80 0.90 1.00 BSC 0.10 0.15 0.20 1.50 1.60 1.70 INCHES NOM MAX 0.031 0.035 0.002 0.004 0.008 0.012 0.006 0.010 0.063 0.065 0.031 0.035 0.04 BSC 0.004 0.006 0.008 0.060 0.063 0.067 MIN 0.027 0.000 0.006 0.004 0.061 0.027 GENERIC MARKING DIAGRAM* A1 STYLE 1: PIN 1. BASE 2. EMITTER 3. COLLECTOR STYLE 2: PIN 1. ANODE 2. N/C 3. CATHODE STYLE 4: PIN 1. CATHODE 2. CATHODE 3. ANODE STYLE 5: PIN 1. GATE 2. SOURCE 3. DRAIN XX M G STYLE 3: PIN 1. ANODE 2. ANODE 3. CATHODE 1 XX = Specific Device Code M = Date Code G = Pb−Free Package *This information is generic. Please refer to device data sheet for actual part marking. Pb−Free indicator, “G” or microdot “ G”, may or may not be present. SOLDERING FOOTPRINT* 0.356 0.014 1.803 0.071 0.508 0.020 0.787 0.031 1.000 0.039 SCALE 10:1 mm Ǔ ǒinches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. DOCUMENT NUMBER: DESCRIPTION: 98ASB15184C SC−75/SOT−416 Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2019 www.onsemi.com onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com onsemi Website: www.onsemi.com ◊ TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative