DF10S2

Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. DF005S2 - DF10S2 Bridge Rectifier Features Description • Maximum Surge Rating: IFSM = 85 A I2t = 30 A2Sec • Optimized VF: Typical 0.93 V at 2 A, 25°C • DF10S Socket Compatible • Glass Passivated Junctions • Lead Free Compliant to EU RoHS 2002/95/EU Directives • Green Molding Compound: IEC61249 • Qualified with IR Reflow and Wave Soldering With the ever-pressing need to improve power supply efficiency, improve surge rating, improve reliability, and reduce size, the DFxS2 family sets a new standard in performance. The new design offers an improved surge rating of 85 A. This is especially important when striving to improve reliability and increase efficiency. High efficiency designs strive to reduce circuit resistance, which, unfortunately can result in increased inrush surge. As such higher surge current ratings can be required to maintain or improve reliability. The design also offers improved efficiency by achieving a 2 A VF of 1.1 V maximum at 25°C. This lower VF also supports cooler and more efficient operation. ~ Finally, the DFxS2 achieves all this in a SDIP surface mount form factor, reducing board space and volumetric requirements vs. competitive devices. + IN OUT ~ - SDIP Ordering Information Part Number Top Mark Package Packing Method DF005S2 DF005S2 SDIP 4L Tape and Reel DF01S2 DF01S2 SDIP 4L Tape and Reel DF02S2 DF02S2 SDIP 4L Tape and Reel DF04S2 DF04S2 SDIP 4L Tape and Reel DF06S2 DF06S2 SDIP 4L Tape and Reel DF08S2 DF08S2 SDIP 4L Tape and Reel DF10S2 DF10S2 SDIP 4L Tape and Reel © 2014 Fairchild Semiconductor Corporation DF005S2 - DF10S2 Rev. 1.2 www.fairchildsemi.com DF005S2 - DF10S2 — Bridge Rectifier June 2015 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Values are at TA = 25°C unless otherwise noted. Symbol Parameter Value DF005S2 DF01S2 DF02S2 DF04S2 DF06S2 DF08S2 DF10S2 Unit VRRM Maximum Recurrent Peak Reverse Voltage 50 100 200 400 600 800 1000 V VRMS Maximum RMS Bridge Input Voltage 35 70 140 280 420 560 700 V VDC Maximum DC Blocking Voltage 50 100 200 400 600 800 1000 V IF(AV) Maximum Average Forward Current TA = 40°C 2.0 A IFSM Peak Forward Surge Current 8.3 ms Single Half-Sine Wave Superimposed on Rated Load(JEDEC Method) 85 A TSTG Storage Temperature Range -55 to +150 °C Operating Junction Temperature Range -55 to +150 °C TJ Thermal Characteristics(1) Symbol RθJA ψJL Parameter Conditions Max. Single-Die Measurement (Maximum Land Pattern: 13 x 13 mm) 60 Multi-Die Measurement (Maximum Land Pattern: 13 x 13 mm) 50 Multi-Die Measurement (Minimum Land Pattern: 1.3 x 1.5 mm) 100 Thermal Characterization Single-Die Measurement Parameter, Junction to Lead (Maximum and Minimum Land Pattern) 25 Thermal Resistance, Junction to Ambient Unit °C/W °C/W Note: 1. The thermal resistances (RθJA & ψJL) are characterized with the device mounted on the following FR4 printed circuit boards, as shown in Figure 1 and Figure 2. PCB size: 76.2 x 114.3 mm. Heating effect from adjacent dice is considered and only two dices are powered at the same time. F S S F F S S F Figure 2. Minimum Pads of 2 oz Copper Figure 1. Maximum Pads of 2 oz Copper © 2014 Fairchild Semiconductor Corporation DF005S2 - DF10S2 Rev. 1.2 www.fairchildsemi.com 2 DF005S2 - DF10S2 — Bridge Rectifier Absolute Maximum Ratings Values are at TA = 25°C unless otherwise noted. Symbol VF Parameter Conditions Min. Typ. Forward Voltage Drop per Bridge Element IF = 2.0 A IR DC Reverse Current at Rated DC Blocking Voltage I2t Rating for Fusing (t < 8.3 ms) CJ Junction Capacitance © 2014 Fairchild Semiconductor Corporation DF005S2 - DF10S2 Rev. 1.2 Max. Unit 1.1 V TJ = 25°C 3 TJ = 125°C 500 30 VR = 4.0 V, f = 1.0 MHz 23 μA A2S pF www.fairchildsemi.com 3 DF005S2 - DF10S2 — Bridge Rectifier Electrical Characteristics 100 Reverse Current, IR[μA] Forward Current, IF[A] 10 1 o TJ=150 C o 0.1 TJ=25 C o TJ=125 C 10 o o TJ=125 C TJ=150 C 1 o TJ=25 C 0.1 0.01 o TJ= -55 C 0.01 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 o TJ=-55 C 1.1 1E-3 200 1.2 400 Forward Voltage Drop, VF[V] Figure 3. Typical Instantaneous Forward Characteristics 1000 100 IFSM, Peak Forward Surge Current [A] Average Current [DC] 800 Figure 4. Typical Reverse Characteristics 2.0 1.5 Max Pad (Sigle die) 1.0 0.5 0.0 40 600 Reverse Voltage, VR[V] 60 80 100 120 140 160 180 90 80 70 60 50 40 30 20 10 0 200 o 0 20 40 60 80 100 Number of Cycles at 60 Hz Ambient Temperature [ C] Figure 5. Maximum Average Current vs. Ambient Temperature Figure 6. Peak Forward Surge Current vs. Number of Cycles at 60Hz 40 f = 1 MHz Juntion Capacitance, CJ[pF] 35 30 25 20 15 10 5 0 0 10 20 30 40 50 Reverse Voltage, VR[V] Figure 7. Typical Junction Capacitance © 2014 Fairchild Semiconductor Corporation DF005S2 - DF10S2 Rev. 1.2 www.fairchildsemi.com 4 DF005S2 - DF10S2 — Bridge Rectifier Typical Performance Characteristics DF005S2 - DF10S2 — Bridge Rectifier Physical Dimensions       3,1,' 237,21$/           7239,(: &+$0)(5 237,21$/ /$1'3$77(515(&200(1'$7,21            6,'(9,(:   (1'9,(: 127(6 $7+,63$&.$*('2(6127&21)25072 $1