DM74ALS04BM

Revised February 2000 DM74ALS04B Hex Inverter General Description Features This device contains six independent gates, each of which performs the logic INVERT function. ■ Switching specifications at 50 pF ■ Switching specifications guaranteed over full temperature and VCC range ■ Advanced oxide-isolated, ion-implanted Schottky TTL process ■ Functionally and pin for pin compatible with Schottky and low power Schottky TTL counterpart ■ Improved AC performance over Schottky and low power Schottky counterparts Ordering Code: Order Number Package Number Package Description DM74ALS04BM M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow DM74ALS04BSJ M14D 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide DM74ALS04BN N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Connection Diagram Function Table Y=A Input Output A Y L H H L H = HIGH Logic Level L = LOW Logic Level © 2000 Fairchild Semiconductor Corporation DS006177 www.fairchildsemi.com DM74ALS04B Hex Inverter September 1986 DM74ALS04B Absolute Maximum Ratings(Note 1) Supply Voltage 7V Input Voltage 7V 0°C to +70°C Operating Free Air Temperature Range Note 1: The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. −65°C to +150°C Storage Temperature Range Typical θJA N Package 88.0°C/W M Package 118.5°C/W Recommended Operating Conditions Symbol Parameter Min Nom Max 4.5 5 5.5 Units VCC Supply Voltage VIH HIGH Level Input Voltage V VIL LOW Level Input Voltage 0.8 V IOH HIGH Level Output Current −0.4 mA IOL LOW Level Output Current 8 mA TA Free Air Operating Temperature 70 °C 2 V 0 Electrical Characteristics over recommended operating free air temperature range. All typical values are measured at VCC = 5V, TA = 25°C. Symbol Parameter Conditions VIK Input Clamp Voltage VCC = 4.5V, II = −18 mA VOH HIGH Level IOH = −0.4 mA Output Voltage VCC = 4.5V to 5.5V VOL LOW Level Typ Units −1.2 V IOL = 8 mA V 0.35 0.5 V VCC = 5.5V, VIH = 7V 0.1 mA VCC = 5.5V, VIH = 2.7V 20 µA VCC = 5.5V, VIL = 0.4V −0.1 mA −112 mA 1.1 mA 4.2 mA II Input Current @ IIH HIGH Level Input Current IIL LOW Level Input Current IO Output Drive Current VCC = 5.5V VO = 2.25V ICC Supply Current VCC = 5.5V Outputs HIGH 0.65 Outputs LOW 2.4 Maximum Input Voltage Max VCC − 2 VCC = 4.5V Output Voltage Min −30 Switching Characteristics over recommended operating free air temperature range Symbol tPLH tPHL Parameter Conditions Propagation Delay Time VCC = 4.5V to 5.5V LOW-to-HIGH Level Output RL = 500Ω Propagation Delay Time CL = 50 pF HIGH-to-LOW Level Output www.fairchildsemi.com 2 Min Max Units 3 11 ns 2 8 ns DM74ALS04B Physical Dimensions inches (millimeters) unless otherwise noted 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow Package Number M14A 3 www.fairchildsemi.com DM74ALS04B Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M14D www.fairchildsemi.com 4 DM74ALS04B Hex Inverter Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Package Number N14A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 5 www.fairchildsemi.com