DM74AS00MX

DM74AS00 Quad 2-Input NAND Gate tm Features General Description ■ Switching specifications at 50pF This device contains four independent gates, each of which performs the logic NAND function. ■ Switching specifications guaranteed over full temperature and VCC range ■ Advanced oxide-isolated, ion-implanted Schottky TTL process ■ Functionally and pin for pin compatible with Schottky, low power Schottky, and advanced low power Schottky TTL counterpart ■ Improved AC performance over Schottky, low power Schottky, and advanced low power Schottky counterparts Ordering Information Order Number Package Number DM74AS00M M14A Package Description 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering number. Connection Diagram Function Table Y = AB Inputs Output A B Y L L H L H H H L H H H L H = HIGH Logic Level L = LOW Logic Level ©1986 Fairchild Semiconductor Corporation DM74AS00 Rev. 1.2 www.fairchildsemi.com DM74AS00 Quad 2-Input NAND Gate May 2007 Symbol Parameter VCC Rating Supply Voltage 7V VI Input Voltage 7V TA Operating Free Air Temperature Range TSTG Storage Temperature Range θJA Typical Thermal Resistance 0°C to +70°C –65°C to +150°C 114.0°C/W Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Symbol VCC Parameter Supply Voltage Min. Nom. Max. Units 4.5 5 5.5 V VIH HIGH Level Input Voltage VIL LOW Level Input Voltage 2 0.8 V V IOH HIGH Level Output Current –2 mA IOL LOW Level Output Current 20 mA TA Free Air Operating Temperature 70 °C 0 Electrical Characteristics Over recommended operating free air temperature range. All typical values are measured at VCC = 5V, TA = 25°C. Symbol Parameter Conditions VIK Input Clamp Voltage VCC = 4.5V, II = –18mA VOH HIGH Level Output Voltage IOH = –2mA, VCC = 4.5V to 5.5V VOL LOW Level Output Voltage VCC = 4.5V, IOL = 20mA Min. Typ. Max. Units –1.2 VCC – 2 V V 0.35 0.5 V II Input Current at Max Input Voltage VCC = 5.5V, VIH = 7V 0.1 mA IIH HIGH Level Input Current VCC = 5.5V, VIH = 2.7V 20 µA IIL LOW Level Input Current VCC = 5.5V, VIL = 0.4V –0.5 mA IO Output Drive Current VCC = 5.5V, VO = 2.25V –112 mA ICC Supply Current VCC = 5.5V mA –30 Outputs HIGH 2.2 3.2 Outputs LOW 10.8 17.4 Switching Characteristics Over recommended operating free air temperature range Symbol Parameter tPLH Propagation Delay Time, LOW-to-HIGH Level Output tPHL Propagation Delay Time, HIGH-to-LOW Level Output ©1986 Fairchild Semiconductor Corporation DM74AS00 Rev. 1.2 Conditions VCC = 4.5V to 5.5V, RL = 500Ω, CL = 50pF Min Max Units 1 4.5 ns 1 4 ns www.fairchildsemi.com 2 DM74AS00 Quad 2-Input NAND Gate Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. DM74AS00 Quad 2-Input NAND Gate Physical Dimensions Dimensions are in millimeters unless otherwise noted. Figure 1. 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Package Number M14A ©1986 Fairchild Semiconductor Corporation DM74AS00 Rev. 1.2 www.fairchildsemi.com 3 The following are registered and unregistered trademarks and service marks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks ACEx® Build it Now™ CorePLUS™ CROSSVOLT™ CTL™ Current Transfer Logic™ EcoSPARK® FACT Quiet Series™ FACT® FAST® FastvCore™ FPS™ FRFET® Global Power ResourceSM Green FPS™ Green FPS™ e-Series™ GTO™ i-Lo™ IntelliMAX™ ISOPLANAR™ MegaBuck™ MICROCOUPLER™ MicroPak™ Motion-SPM™ OPTOLOGIC® OPTOPLANAR® PDP-SPM™ Power220® Power247® POWEREDGE® Power-SPM™ PowerTrench® Programmable Active Droop™ QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ SMART START™ SPM® STEALTH™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ The Power Franchise® ™ TinyBoost™ TinyBuck™ TinyLogic® TINYOPTO™ TinyPower™ TinyPWM™ TinyWire™ µSerDes™ UHC® UniFET™ VCX™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I28 ©1986 Fairchild Semiconductor Corporation DM74AS00 Rev. 1.2 www.fairchildsemi.com 4 DM74AS00 Quad 2-Input NAND Gate TRADEMARKS