DM74LS03N

Revised March 2000 DM74LS03 Quad 2-Input NAND Gates with Open-Collector Outputs General Description Pull-Up Resistor Equations This device contains four independent gates each of which performs the logic NAND function. The open-collector outputs require external pull-up resistors for proper logical operation. Where: N1 (IOH) = total maximum output high current for all outputs tied to pull-up resistor N2 (IIH) = total maximum input high current for all inputs tied to pull-up resistor N3 (IIL) = total maximum input low current for all inputs tied to pull-up resistor Ordering Code: Order Number Package Number Package Description DM74LS03M M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150 Narrow DM74LS03N N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Connection Diagram Function Table Y = AB Inputs Output A B Y L L H L H H H L H H H L H = HIGH Logic Level L = LOW Logic Level © 2000 Fairchild Semiconductor Corporation DS006344 www.fairchildsemi.com DM74LS03 Quad 2-Input NAND Gates with Open-Collector Outputs August 1986 DM74LS03 Absolute Maximum Ratings(Note 1) Supply Voltage Note 1: The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. 7V Input Voltage 7V Output Voltage 7V 0°C to +70°C Operating Free Air Temperature Range −65°C to +150°C Storage Temperature Range Recommended Operating Conditions Symbol Parameter Min Nom Max 4.75 5 5.25 Units VCC Supply Voltage VIH HIGH Level Input Voltage V VIL LOW Level Input Voltage 0.8 V VOH HIGH Level Output Voltage 5.5 V IOL LOW Level Output Current 8 mA TA Free Air Operating Temperature 70 °C 2 V 0 Electrical Characteristics over recommended operating free air temperature range (unless otherwise noted) Symbol Parameter Conditions VI Input Clamp Voltage VCC = Min, II = −18 mA ICEX HIGH Level VCC = Min, VO = 5.5V, Output Current VIL = Max VOL LOW Level VCC = Min, IOL = Max, Output Voltage VIH = Min Typ Min (Note 2) IOL = 4 mA, VCC = Min Max Units −1.5 V 100 µA 0.35 0.5 0.25 0.4 V II Input Current @ Max Input Voltage VCC = Max, VI = 7V 0.1 IIH HIGH Level Input Current VCC = Max, VI = 2.7V 20 µA IIL LOW Level Input Current VCC = Max, VI = 0.4V −0.36 mA ICCH Supply Current with Outputs HIGH VCC = Max 0.8 1.6 mA ICCL Supply Current with Outputs LOW VCC = Max 2.4 4.4 mA mA Switching Characteristics at VCC = 5V and TA = 25°C RL = 2 kΩ Symbol tPLH Propagation Delay Time LOW-to-HIGH Level Output tPHL CL = 15 pF Parameter Propagation Delay Time HIGH-to-LOW Level Output Units Max Min Max 6 20 20 45 ns 3 15 4 20 ns Note 2: All typicals are at VCC = 5V, TA = 25°C. www.fairchildsemi.com CL = 50 pF Min 2 DM74LS03 Physical Dimensions inches (millimeters) unless otherwise noted 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150 Narrow Package Number M14A 3 www.fairchildsemi.com DM74LS03 Quad 2-Input NAND Gates with Open-Collector Outputs Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Package Number N14A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com www.fairchildsemi.com 4