High Efficiency Rectifier
1.0A Glass Passivated
EGP10A - EGP10K
Features
•
•
•
•
Superfast Recovery Time for High Efficiency
Low Forward Voltage, High Current Capability
Low Leakage Current
High Surge Current Capability
www.onsemi.com
ABSOLUTE MAXIMUM RATINGS TA = 25°C unless otherwise noted
Symbol
Value
Units
Average Rectified Current
0.375 ” lead length @ TL = 75_C
1.0
A
AXIAL LEAD / DO−41
CASE 017AH
Peak Forward Surge Current
8.3 ms single half−sine−wave
Superimposed on rated load
(JEDEC method)
30
A
MARKING DIAGRAM
PD
Total Device Dissipation
Derate above 25_C
2.5
17
W
mW°C
IC
Thermal Resistance, Junction to Ambient
50
°C/W
IO
If(surge)
Parameter
EGP10K
$Y&Z&3
EGP10K
$Y
&Z
&3
°C
TJ, TSTG Junction and Storage Temperature Range −65 ~ 150
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
*These ratings are limiting values above which the serviceability of any
semiconductor device may be impaired.
= Specific Device Code
= ON Semiconductor Logo
= Assembly Code
= Date Code
ELECTRICAL CHARACTERISTICS TA = 25°C unless otherwise noted
Device
10A
10B
10C
10D
10F
10G
10J
10K
Units
Peak Repetitive Reverse Voltage
50
100
150
200
300
400
600
800
V
Maximum RMS Voltage
35
70
105
140
210
280
420
560
V
DC Reverse Voltage (Rated VR)
50
100
150
200
300
400
600
800
V
Parameter
Maximum Reverse
Current at Rated VR
TA = 25_C
5.0
mA
TA = 125_C
100
mA
Maximum Reverse Recovery Time
IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A
Maximum Forward Voltage @ 2.0 A
Typical Junction Capacitance
VR = 4.0 V, f = 1.0 MHz
50
0.95
1.25
22
15
75
nS
1.7
V
pF
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
*Pulse Test: Pulse Width ≤ 300 ms, Duty Cycle ≤ 2%.
© Semiconductor Components Industries, LLC, 2007
February, 2020 − Rev. 1
1
Publication Order Number:
EGP10K/D
EGP10A − EGP10K
TYPICAL PERFORMANCE CHARACTERISTICS
Figure 1.
Figure 2.
Figure 3.
Figure 4.
Figure 5.
www.onsemi.com
2
EGP10A − EGP10K
Reverse Recovery Time Characterstic and Test Circuit Diagram
Figure 6.
Figure 7.
ORDERING INFORMATION
Device
Package
Shipping
EGP10K
Axial Lead / DO−41
CASE 017AH
5000 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
www.onsemi.com
3
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
AXIAL LEAD / DO−41
CASE 017AH
ISSUE O
DATE 31 AUG 2016
25.40 MIN (2X)
5.20
4.06
0.86
0.71
NOTES: UNLESS OTHERWISE SPECIFIED
2.72
2.03
DOCUMENT NUMBER:
DESCRIPTION:
98AON13444G
AXIAL LEAD / DO−41
A) PACKAGE STANDARD REFERENCE:
JEDEC DO−204 VARIATION AL.
B) PACKAGE BODY CAN BE PLASTIC OR
HERMETICALLY SEALED GLASS.
C) ALL DIMENSIONS ARE IN MILLIMETERS.
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
◊
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
www.onsemi.com
1
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
ON Semiconductor:
EGP10B EGP10C EGP10D EGP10F EGP10G EGP10K
