DATA SHEET
www.onsemi.com
Dual Bias Resistor
Transistors
(3)
(2)
R1
NPN and PNP Silicon Surface Mount
Transistors with Monolithic Bias
Resistor Network
EMD4DXV6
The BRT (Bias Resistor Transistor) contains a single transistor with
a monolithic bias network consisting of two resistors; a series base
resistor and a base−emitter resistor. These digital transistors are
designed to replace a single device and its external resistor bias
network. The BRT eliminates these individual components by
integrating them into a single device. In the EMD4DXV6T1 series,
two complementary BRT devices are housed in the SOT−563 package
which is ideal for low power surface mount applications where board
space is at a premium.
•
Simplifies Circuit Design
Reduces Board Space
Reduces Component Count
NSV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q101
Qualified and PPAP Capable
These are Pb−Free Devices
MAXIMUM RATINGS (TA = 25°C unless otherwise noted, common for Q1
and Q2, − minus sign for Q1 (PNP) omitted)
Symbol
Value
Unit
Collector-Base Voltage
VCBO
50
Vdc
Collector-Emitter Voltage
VCEO
50
Vdc
IC
100
mAdc
Symbol
Max
Unit
Total Device Dissipation
TA = 25°C (Note 1)
Derate above 25°C (Note 1)
PD
357
2.9
mW
mW/°C
Thermal Resistance,
Junction-to-Ambient (Note 1)
RqJA
350
°C/W
PD
500
4.0
mW
mW/°C
RqJA
250
°C/W
TJ, Tstg
−55 to +150
°C
Rating
Collector Current
Q2
R2
R1
(4)
(5)
Total Device Dissipation
TA = 25°C (Note 1)
Derate above 25°C
Thermal Resistance,
Junction-to-Ambient (Note 1)
Junction and Storage Temperature
(6)
6
1
SOT−563
CASE 463A
STYLE 1
MARKING DIAGRAM
1
U7 M G
G
U7 = Specific Device Code
M = Date Code
G = Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
Package
Shipping†
EMD4DXV6T1G
SOT−563
(Pb−Free)
4000 / Tape &
Reel
EMD4DXV6T5G
SOT−563
(Pb−Free)
8000 / Tape &
Reel
NSVEMD4DXV6T5G
SOT−563
(Pb−Free)
8000 / Tape &
Reel
NSVEMD4DXV6T1G
SOT−563
(Pb−Free)
4000 / Tape &
Reel
Device
THERMAL CHARACTERISTICS
Characteristic
(One Junction Heated)
R2
Q1
Features
•
•
•
•
(1)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
1. FR−4 board with minimum mounting pad.
© Semiconductor Components Industries, LLC, 2014
April, 2022 − Rev. 3
1
Publication Order Number:
EMD4DXV6/D
EMD4DXV6
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
Symbol
Min
Typ
Max
Unit
Collector-Base Cutoff Current (VCB = 50 V, IE = 0)
ICBO
−
−
100
nAdc
Collector-Emitter Cutoff Current (VCB = 50 V, IB = 0)
ICEO
−
−
500
nAdc
Emitter-Base Cutoff Current (VEB = 6.0, IC = 5.0 mA)
IEBO
−
−
0.2
mAdc
Collector-Base Breakdown Voltage (IC = 10 mA, IE = 0)
V(BR)CBO
50
−
−
Vdc
Collector-Emitter Breakdown Voltage (IC = 2.0 mA, IB = 0)
V(BR)CEO
50
−
−
Vdc
hFE
80
140
−
VCE(SAT)
−
−
0.25
Vdc
Output Voltage (on) (VCC = 5.0 V, VB = 2.5 V, RL = 1.0 kW)
VOL
−
−
0.2
Vdc
Output Voltage (off) (VCC = 5.0 V, VB = 0.5 V, RL = 1.0 kW)
Characteristic
Q1 TRANSISTOR: PNP
OFF CHARACTERISTICS
ON CHARACTERISTICS
DC Current Gain (VCE = 10 V, IC = 5.0 mA)
Collector−Emitter Saturation Voltage (IC = 10 mA, IB = 0.3 mA)
VOH
4.9
−
−
Vdc
Input Resistor
R1
7.0
10
13
kW
Resistor Ratio
R1/R2
0.17
0.21
0.25
Collector-Base Cutoff Current (VCB = 50 V, IE = 0)
ICBO
−
−
100
nAdc
Collector-Emitter Cutoff Current (VCB = 50 V, IB = 0)
ICEO
−
−
500
nAdc
Emitter-Base Cutoff Current (VEB = 6.0, IC = 0 mA)
IEBO
−
−
0.1
mAdc
Collector-Base Breakdown Voltage (IC = 10 mA, IE = 0)
V(BR)CBO
50
−
−
Vdc
Collector-Emitter Breakdown Voltage (IC = 2.0 mA, IB = 0)
V(BR)CEO
50
−
−
Vdc
Q2 TRANSISTOR: NPN
OFF CHARACTERISTICS
ON CHARACTERISTICS
DC Current Gain (VCE = 10 V, IC = 5.0 mA)
hFE
80
140
−
VCE(SAT)
−
−
0.25
Vdc
Output Voltage (on) (VCC = 5.0 V, VB = 3.5 V, RL = 1.0 kW)
VOL
−
−
0.2
Vdc
Output Voltage (off) (VCC = 5.0 V, VB = 0.5 V, RL = 1.0 kW)
VOH
4.9
−
−
Vdc
Input Resistor
R1
32.9
47
61.1
kW
Resistor Ratio
R1/R2
0.8
1.0
1.2
Collector−Emitter Saturation Voltage (IC = 10 mA, IB = 0.3 mA)
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
PD , POWER DISSIPATION (MILLIWATTS)
250
200
150
100
50
0
-50
RqJA = 833°C/W
0
50
100
TA, AMBIENT TEMPERATURE (°C)
Figure 1. Derating Curve
www.onsemi.com
2
150
EMD4DXV6
180
1
IC/IB = 10
hFE , DC CURRENT GAIN (NORMALIZED)
VCE(sat) , MAXIMUM COLLECTOR VOLTAGE (VOLTS)
TYPICAL ELECTRICAL CHARACTERISTICS — EMD4DXV6 PNP TRANSISTOR
TA=-25°C
25°C
0.1
75°C
0.01
0.001
0
20
40
60
IC, COLLECTOR CURRENT (mA)
25°C
140
-25°C
120
100
80
60
40
20
0
80
TA=75°C
VCE = 10 V
160
2
1
4
6
Figure 2. VCE(sat) versus IC
100
TA=75°C
3.5
IC, COLLECTOR CURRENT (mA)
f = 1 MHz
lE = 0 V
TA = 25°C
4
3
2.5
2
1.5
1
0.5
0
2
4
6 8 10 15 20 25 30 35
VR, REVERSE BIAS VOLTAGE (VOLTS)
40
45
10
VO = 5 V
0
2
4
6
Vin, INPUT VOLTAGE (VOLTS)
VO = 0.2 V
25°C
TA=-25°C
75°C
1
0
10
8
Figure 5. Output Current versus Input Voltage
10
0.1
25°C
-25°C
1
50
Figure 4. Output Capacitance
V in , INPUT VOLTAGE (VOLTS)
Cob , CAPACITANCE (pF)
80 90 100
Figure 3. DC Current Gain
4.5
0
8 10 15 20 40 50 60 70
IC, COLLECTOR CURRENT (mA)
20
30
IC, COLLECTOR CURRENT (mA)
40
Figure 6. Input Voltage versus Output Current
www.onsemi.com
3
50
10
EMD4DXV6
10
IC/IB = 10
TA = −25°C
75°C
25°C
1
0.1
0.01
0
20
40
60
80
hFE, DC CURRENT GAIN (NORMALIZED)
VCE(sat), MAXIMUM COLLECTOR VOLTAGE
(VOLTS)
TYPICAL ELECTRICAL CHARACTERISTICS — EMD4DXV6 NPN TRANSISTOR
TA = 75°C
25°C
−25°C
100
10
1
10
100
IC, COLLECTOR CURRENT (mA)
Figure 7. VCE(sat) vs. IC
Figure 8. DC Current Gain
100
0.8
IC, COLLECTOR CURRENT (mA)
f = 1 MHz
lE = 0 A
TA = 25°C
0.6
0.4
0.2
10
20
30
25°C
10
TA = −25°C
1
0.1
0.01
0.001
50
40
75°C
VO = 5 V
0
2
VR, REVERSE BIAS VOLTAGE (VOLTS)
Figure 9. Output Capacitance
4
6
8
Vin, INPUT VOLTAGE (VOLTS)
Figure 10. Output Current vs. Input Voltage
100
VO = 0.2 V
Vin, INPUT VOLTAGE (VOLTS)
Cob, CAPACITANCE (pF)
VCE = 10 V
IC, COLLECTOR CURRENT (mA)
1
0
0
1000
TA = −25°C
10
25°C
75°C
1
0.1
0
10
20
30
40
IC, COLLECTOR CURRENT (mA)
Figure 11. Input Voltage vs. Output Current
www.onsemi.com
4
50
10
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
SOT−563, 6 LEAD
CASE 463A
ISSUE H
6
1
SCALE 4:1
DOCUMENT NUMBER:
DESCRIPTION:
98AON11126D
SOT−563, 6 LEAD
DATE 26 JAN 2021
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 2
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
SOT−563, 6 LEAD
CASE 463A
ISSUE H
DATE 26 JAN 2021
GENERIC
MARKING DIAGRAM*
XX MG
1
XX = Specific Device Code
M = Month Code
G
= Pb−Free Package
*This information is generic. Please refer to
device data sheet for actual part marking.
Pb−Free indicator, “G” or microdot “G”, may
or may not be present. Some products may
not follow the Generic Marking.
DOCUMENT NUMBER:
DESCRIPTION:
98AON11126D
SOT−563, 6 LEAD
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 2 OF 2
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
onsemi Website: www.onsemi.com
◊
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative