EMI6316FCTBG
EMI Filter with ESD
Protection for MicroSD Card
Applications
Product Description
http://onsemi.com
The EMI6316 is a 4 x 4, 15−bump EMI filter with ESD protection
device for MicroSD card applications in a 0.4 mm pitch CSP form
factor. It is fully compliant with IEC 61000−4−2. The EMI6316 is also
RoHS II compliant.
MARKING
DIAGRAM
WLCSP15
CASE 567FX
A1 Corner
Indicator
PACKAGE / PINOUT DIAGRAMS
1
2
3
4
A
B
C
4
3
2
1
A
63
YW
D
B
63
Y
W
G
63
YW
G
= Specific Device Code
= Year
= Work Week
= Pb−Free Package
ORDERING INFORMATION
See detailed ordering, marking and shipping information in the
package dimensions section on page 3 of this data sheet.
C
D
Top View
(Bumps Down View)
© Semiconductor Components Industries, LLC, 2012
September, 2012 − Rev. 1
Bottom View
(Bumps Up View)
1
Publication Order Number:
EMI6316/D
EMI6316FCTBG
External
(B2)
(B1)
Internal
(B4)
(C1)
(C4)
(A1)
(A4)
(A2)
(A3)
(D2)
(D3)
(D1)
(D4)
External
(B3, C3)
Figure 1. Electrical Schematic
Table 1. PIN DESCRIPTIONS
Pin
Description
Pin
Description
Pin
Description
Pin
Description
A1
dat0 Internal
B1
clk Internal
C1
cmd Internal
D1
data3 Internal
A2
dat1 Internal
B2
VCC External
D2
data2 Internal
A3
SDdat1 External
B3
GND
C3
GND
D3
SDdata2 External
A4
SDdat0 External
B4
SDclk External
C4
SDcmd External
D4
SDdata3 External
http://onsemi.com
2
EMI6316FCTBG
ELECTRICAL SPECIFICATIONS AND CONDITIONS
Table 2. PARAMETERS AND OPERATING CONDITIONS
Parameter
Rating
Unit
Storage Temperature Range
−55 to +150
°C
Operating Temperature Range
−40 to +85
°C
Table 3. ELECTRICAL OPERATING CHARACTERISTICS (Note 1)
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
R1 R2 R3
R4 R5 R6
Resistance
34
40
46
W
R9 R10 R11
R12
Resistance
42.5
50
57.5
kW
R13
Resistance
12.75
15
17.25
kW
10
100
nA
11.5
14
pF
ILEAK
C
VB
VESD
Leakage Current per Channel
VIN = 3.0 V
Line Capacitance
At 1 MHz, VIN = 0 V
9
At 1 MHz, VIN = 1.8 V
(Note 2)
8
pF
At 1 MHz, VIN = 2.5 V
7
pF
Breakdown Voltage (Positive)
IR = 1 mA
ESD Protection Peak Discharge Voltage at A3, A4, B2,
B4, C4, D3 and D4 pins
a) Contact Discharge per IEC 61000−4−2 standard
b) Air Discharge per IEC 61000−4−2 standard
(Note 3)
ESD Protection Peak Discharge Voltage at A1, A2, B1,
C1, D1 and D2 pins
a) Contact Discharge per IEC 61000−4−2 standard
b) Air Discharge per IEC 61000−4−2 standard
(Note 3)
6
7
9
V
kV
±8
±15
±2
±2
1. All parameters specified at TA = 25°C unless otherwise noted.
2. MicroSD version 3.0 SDR104 compliant.
3. Standard IEC 61000−4−2 with CDischarge = 150 pF, RDischarge = 330 W.
Table 4. CSP TAPE AND REEL SPECIFICATIONS†
Part Number
EMI6316FCTBG
Chip Size (mm)
Package
Shipping†
1.56 x 1.56 x 0.50
WLCSP15
(Pb−Free)
5000 / Tape & Reel
† For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specification Brochure, BRD8011/D.
http://onsemi.com
3
EMI6316FCTBG
RF CHARACTERISTICS
2.5V
0V
Figure 2. S21 Attenuation Simulation
http://onsemi.com
4
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
WLCSP15, 1.56x1.56
CASE 567FX
ISSUE O
SCALE 4:1
ÈÈ
ÈÈ
D
PIN A1
REFERENCE
2X
A
B
DATE 07 JUN 2012
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. COPLANARITY APPLIES TO SPHERICAL
CROWNS OF SOLDER BALLS.
E
DIM
A
A1
A2
b
D
E
e
0.10 C
2X
0.10 C
TOP VIEW
A2
0.10 C
GENERIC
MARKING DIAGRAM*
A
0.05 C
NOTE 3
15X
A1
0.05 C A B
0.03 C
C
SIDE VIEW
e
XX
Y
W
G
e
D
XX
YW
G
SEATING
PLANE
e/2
b
MILLIMETERS
MIN
MAX
0.47
0.53
0.185
0.205
0.305 REF
0.24
0.29
1.56 BSC
1.56 BSC
0.40 BSC
e/2
C
= Specific Device Code
= Year
= Work Week
= Pb−Free Package
*This information is generic. Please refer to
device data sheet for actual part marking.
Pb−Free indicator, “G” or microdot “ G”,
may or may not be present.
B
A
1
2
3
4
BOTTOM VIEW
RECOMMENDED
SOLDERING FOOTPRINT*
0.40
PITCH
A1
PACKAGE
OUTLINE
15X
0.23
0.40
PITCH
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
DOCUMENT NUMBER:
DESCRIPTION:
98AON81359E
WLCSP15, 1.56X1.56
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
onsemi Website: www.onsemi.com
◊
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative