ES1JAF

ES1DAF, ES1JAF Surface Mount Ultrafast Rectifier Features • • • • • • • Fast Switching Speed – Maximum Trr 35 ns Ultra Thin Profile − Maximum Height of 1.0 mm Glass Passivated Junction UL Flammability 94V−0 Classification MSL 1 Green Mold Compound These Devices are Pb−Free, Halogen Free Free and are RoHS Compliant www.onsemi.com 1 Cathode 2 Anode Ultrafast Rectifier Specifications DO−214AD (SMAF) CASE 403AD ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise noted) Value Parameter Symbol ES1DAF ES1JAF Unit VRRM Recurrent Peak Reverse Voltage 200 600 V VRMS RMS Voltage 140 420 V DC Blocking Voltage 200 600 V VR IF(AV) Average Forward Current 1 A IFSM Peak Forward Surge Current: 8.3 ms Single Half Sine−Wave Superimposed on Rated Load 30 A Operating Junction Temperature Range −55 to +150 °C Storage Temperature Range −55 to +150 °C TJ TSTG MARKING DIAGRAMS $Y&Z&3 ES1DAF Band Indicates Cathode $Y &Z &3 ES1DAF = ON Semiconductor Logo = Assembly Plant Code = Data Code (Year & Week) = Specific Device Code $Y&Z&3 ES1JAF Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. Band Indicates Cathode $Y &Z &3 ES1JAF = ON Semiconductor Logo = Assembly Plant Code = Data Code (Year & Week) = Specific Device Code ORDERING INFORMATION See detailed ordering and shipping information on page 2 of this data sheet. © Semiconductor Components Industries, LLC, 2015 May, 2018 − Rev. 2 1 Publication Order Number: ES1JAF/D ES1DAF, ES1JAF THERMAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Symbol Value Unit YJL Typical Thermal Characteristics, Junction−to−Lead (Note 1) Characteristic 24 °C/W RqJA Typical Thermal Resistance, Junction−to−Ambient (Note 2) 150 °C/W cm2 copper 1. Mounted on an FR4 PCB, single−sided copper, with 48 2. Mounted on an FR4 PCB, single−sided copper, mini pad. pad area. ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Symbol VF Parameter Forward Voltage Conditions IF = 1 A Min Typ Max Unit ES1DAF − − 0.95 V ES1JAF − − 1.70 IR Reverse Current VR = VDC − − 1 mA trr Reverse Recovery Time IF = 0.5 A, IR = 1 A, Irr = 0.25 A − − 34 ns CJ Junction Capacitance VR = 4 V, f = 1 MHz − 15 − pF Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. ORDERING INFORMATION Part Number Top Mark Package Shipping† ES1DAF ES1DAF DO−214AD (SMAF) (Pb−Free/Halogen Free) 10000 / Tape & Reel ES1JAF ES1JAF DO−214AD (SMAF) (Pb−Free/Halogen Free) 10000 / Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. www.onsemi.com 2 ES1DAF, ES1JAF TYPICAL PERFORMANCE CHARACTERISTICS 0.8 0.6 0.4 0.2 0 IR, Reverse Current (mA) CJ, Junction Capacitance (pF) 1 0 25 50 75 100 125 10 1 100 Figure 1. Forward Current Derating Curve Figure 2. Typical Junction Capacitance 100 200 V TA = 125°C 1 TA = 150°C 0.1 TA = 75°C TA = 25°C 0.01 50 100 150 600 V TA = 150°C 10 TA = 125°C 1 TA = 75°C 0.1 TA = 25°C 0.01 200 20 VR, Peak Reverse Voltage (V) Figure 3. Typical Reverse Characteristics 200 V 1 TA = 125°C TA = 150°C 0.1 TA = 75°C TA = 25°C 0 0.2 0.4 0.6 0.8 100 40 60 80 Percent of Rated Peak Reverse Voltage (%) Figure 4. Typical Reverse Characteristics IF, Forward Current (A) IF, Forward Current (A) 10 VR, Reverse Bias Voltage (V) 10 0.01 1 0.1 TC, Case Temperature (5C) 100 0.001 100 150 IR, Reverse Current (mA) IF, Forward Current (A) 1.2 600 V 1 TA = 125°C TA = 150°C 0.1 TA = 75°C TA = 25°C 0.01 1 0 0.5 1 1.5 2 VF, Forward Voltage (V) VF, Forward Voltage (V) Figure 5. Typical Forward Characteristics Figure 6. Typical Forward Characteristics www.onsemi.com 3 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS SMA−FL CASE 403AD ISSUE A DOCUMENT NUMBER: DESCRIPTION: 98AON13439G SMA−FL DATE 14 JUL 2020 Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2019 www.onsemi.com onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com onsemi Website: www.onsemi.com ◊ TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative