ESDR0524PMUTAG

ESDR0524PMUTAG Transient Voltage Suppressors Low Capacitance ESD Protection for High Speed Data The ESDR0524P transient voltage suppressor is designed to protect high speed data lines from ESD. Ultra−low capacitance and low ESD clamping voltage make this device an ideal solution for protecting voltage sensitive high speed data lines. The flow−through style package allows for easy PCB layout and matched trace lengths necessary to maintain consistent impedance between high speed differential lines such as HDMI. Features http://onsemi.com MARKING DIAGRAM UDFN10 CASE 517BB 4P MG G • Low Capacitance (0.3 pF Typical, I/O to I/O) • ESD Rating of Class 3B (Exceeding 8 kV) per Human Body model and Class C (Exceeding 400 V) per Machine Model IEC 61000−4−2 (±8 kV Contact) 4P = Specific Device Code M = Date Code G = Pb−Free Package (Note: Microdot may be in either location) • Protection for the Following IEC Standards: • UL Flammability Rating of 94 V−0 • This is a Pb−Free Device Typical Applications PIN CONFIGURATION AND SCHEMATIC N/C N/C 10 1 I/O 9 2 I/O GND N/C N/C 8 3 GND 7 4 I/O 6 5 I/O • • • • • HDMI DVI Display Port MDDI eSATA Pin 1 Pin 2 Pin 4 Pin 5 MAXIMUM RATINGS (TJ = 25°C unless otherwise noted) Rating Operating Junction Temperature Range Storage Temperature Range Lead Solder Temperature − Maximum (10 Seconds) IEC 61000−4−2 Contact (ESD) IEC 61000−4−2 Air (ESD) Symbol TJ Tstg TL ESD ESD Value − 55 to +125 − 55 to +150 260 ±8.0 ±15 Unit °C °C °C Pin 3,8 ORDERING INFORMATION kV kV Device ESDR0524PMUTAG Package UDFN10 (Pb−Free) Shipping 3000 / Tape & Reel Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. See Application Note AND8308/D for further description of survivability specs. © Semiconductor Components Industries, LLC, 2010 July, 2010 − Rev. 1 1 Publication Order Number: ESDR0524P/D ESDR0524PMUTAG ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise specified) Parameter Reverse Working Voltage Breakdown Voltage Reverse Leakage Current Clamping Voltage Junction Capacitance Junction Capacitance Symbol VRWM VBR IR VC CJ CJ Conditions I/O Pin to GND (Note 1) IT = 1 mA, I/O Pin to GND VRWM = 5 V, I/O Pin to GND IPP = 1 A, I/O Pin to GND (8 x 20 ms pulse) VR = 0 V, f = 1 MHz between I/O Pins VR = 0 V, f = 1 MHz between I/O Pins and GND 0.3 0.5 6.0 1.0 15 0.4 0.8 Min Typ Max 5.0 Unit V V mA V pF pF 1. TVS devices are normally selected according to the working peak reverse voltage (VRWM), which should be equal or greater than the DC or continuous peak operating voltage level. http://onsemi.com 2 ESDR0524PMUTAG PACKAGE DIMENSIONS UDFN10 2.5x1, 0.5P CASE 517BB−01 ISSUE O L D PIN ONE REFERENCE 2X 2X L AB L1 E OPTIONAL CONSTRUCTIONS DETAIL A NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. DIMENSION b APPLIES TO PLATED TERMINAL AND IS MEASURED BETWEEN 0.15 AND 0.30mm FROM TERMINAL. DIM A A1 A3 b b2 D E e L L1 MILLIMETERS MIN MAX 0.55 0.45 0.00 0.05 0.13 REF 0.15 0.25 0.45 0.35 2.50 BSC 1.00 BSC 0.50 BSC 0.30 0.40 --0.05 0.10 C 0.10 C 0.10 C 10X A3 A A1 0.08 C SIDE VIEW 2X DETAIL A A1 C SEATING PLANE b2 1 5 10X L 10 6 8X e b 0.10 C A B PACKAGE OUTLINE BOTTOM VIEW 0.05 C NOTE 3 *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5773−3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative http://onsemi.com 3 ÉÉÉ ÉÉÉ ÇÇÇ DETAIL B 0.50 10X ÍÍÍ ÍÍÍ DETAIL B TOP VIEW EXPOSED Cu MOLD CMPD A3 OPTIONAL CONSTRUCTION RECOMMENDED SOLDERING FOOTPRINT* 2X 0.45 1.30 0.50 PITCH 8X 0.25 DIMENSIONS: MILLIMETERS ESDR0524P/D