FAN4146ESX

FAN4146   FAN4146是种耗控器，用流插座漏电 护器 (ALCI)和 线漏电 护装置(RCD)。FAN4146可检测危险的 接地条 ，并在有害电发生断开线路。 FAN4146部包含极管整流器、精度12V带隙并联 稳压器、精密的VOS失调感应放大器、延时噪声滤波器、窗口 检测比较器和晶闸管驱动器。加最少数量的外部 ， FAN4146就可检测和防止火线对地故障。 数量最少及 小型SUPERSOTt封装，得FAN4146成超小型、成本的 应用解方案。 FAN4146电路包含置整流器和并联稳压器，只需较 的静态电流，许用、率系电阻。置温度补 的并联稳压器、感应放大器及置电路提 精度对地故障 检测。VOS失调感应放大器许感应线圈直接耦合!放大器的 反馈"号端，无需大容量的50/60Hz流耦合电容。置的延时 滤波器能够滤除感性负载#的频噪声尖峰，$少%虚&有害 触发。置的晶闸管驱动器'有温度补，该设计可满足在 宽范围选择外部晶闸管的电流要求。 外部 数量最少及6引脚SUPERSOT封装带来%成本、 紧(设计和布局。FAN4146ESX是温度范围增大的器 。  www.onsemi.cn 1 TSOT23 6-Lead CASE 419BL MARKING DIAGRAM XXX MG G 1 XXX = Specific Device Code M = Date Code G = Pb-Free Package •)用双线ALCI*RCD应用 •)精密感应放大器*带隙基+ •)置流整流器 •)直接直流耦合至感应线圈 •)置噪声滤波器 •)压晶闸管禁用 •)晶闸管门极驱动器 •)可调敏感度 •)最少外部器 •)满足UL943B要求 •)适合120Vor220V系统 •)空间节省的SUPERSOT 6引脚封装 ORDERING INFORMATION See detailed ordering and shipping information on page 9 of this data sheet.  •),护理-品 •) 线电源插头，断路器和要求带有GFI安.设施的电源线 •)ALCI和RCCB电路 © Semiconductor Components Industries, LLC, 2010 March, 2019 − Rev. 2 1 Publication Order Number: FAN4146CN/D FAN4146   RTEST TEST Sense Coil 1:1000 Load Hot Line Hot Load Neutral Solenoid Line Neutral RIN MOV Q1 FAN4146 SCR C1 Neutral R1 AmpOut RSET VFB Line VREF : R1: 91 kW (VAC) RTEST: 15 kW RSET: 511 kW ( 1) RIN: 470 W C1: 22 nF ： 1.    (5 mA )。 2.  ， ， ! 。 图 1. 120/220 VAC ALCI   ( 2) TEST RTEST Sense Coil 1:1300 Load Hot Line Hot Load Neutral MOV Solenoid Line Neutral RIN SCR C1 Neutral C2 Line FAN4146ES Q1 AmpOut RSET VFB VREF R1 : R1: 174 kW (VAC) RTEST: 15 kW RSET: 324 kW ( 3) RIN: 470 W ： 3.    (10 mA )。 4.  ， ， ! 。 图 2. 220 VAC RCD   ( 4) www.onsemi.cn 2 C1: 22 nF C2: 10 nF FAN4146  AMPOUT VS C1 VFB VREF I1 SCR A1 Delay SCR Driver t1 Q1 R1 VTH C2 VREF VS Rectifier and Bias VREF VTH 图 3.   PIN 1 SCR AmpOut Neutral VFB Line VREF 图 4.      1 SCR 2 Neutral FAN4146*+ *,- 3 Line FAN4146*+ *,- 4 VREF 5 VFB 6 AmpOut "#$%& '() *./ 01- *./ 1- "#*234VFB5，67Ifault 89: www.onsemi.cn 3 Neutral Line FAN4146     ! "  #$ 15 mA ICC *,*. 3;*.，< = − VCC *,* 3;*，< = −1.5 16.0 V 3;*= −0.8 15.0 V −65 +150 °C FG，JESD22-A114 − 2500 V H*6IFG，JESD22-C101 − 1000 JKFG，JESD22-A115 − 200 > TSTG AB:C ESD D*/*E ?@ Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. (LMN) OP*QRS7T !" C，#E$UV。OPQR%&W'X，YZ[(\#)E，E$]#UV，^* _。 %&'( (`Oab，> cdeTA = 25°C, Ishunt = 1 mA fg。)  VREG  *,hi* ! "   #$ *,= 12.2 12.7 13.2 V *,= , Ishunt = -2 mA −0.9 −0.7 − IQ Dj*. *,= = 10 V 350 400 450 mA VREF L* VREF = 5.8 6.0 6.2 V VTH   AmpOut  VREF 3.4 3.5 3.6 V VOS /,k RSET = 511 kW, RIN = 500 W −450 0 450 mV IOS /-,k( 5) 6l −50 0 50 nA G /m.no( 5) 6l − 100 − dB fGBW /noHp( 5) 6l − 1.5 − MHz VSW+ /q*rs AmpOut  VREF, IFAULT = 10 mA 4.0 − − V VSW− /t*rs VREF  AmpOut, IFAULT = -10 mA 4.0 − − V ISINK /*.u AmpOut = VREF + 3 V, VFB = VREF + 100 mV 400 − − mA ISRL /*., AmpOut = VREF – 3 V, VFB = VREF − 100 mV 400 − − mA vfwx /C1 $%& fv/0y 0.75 1.00 1.25 ms ROUT td SCR-"*2 SCR－= = 250 mV, AmpOut = VREF − 0.5 1.0 kW VOUT SCR-"* SCR－= , AmpOut = VREF − 1 10 mV SCR－= , AmpOut = VREF + 4 V 2.5 − − V SCR－= = 1 V AmpOut = VREF + 4 V 350 500 − mA IOUT SCR-"*. Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. (LMN) {05 ab，“*|”T} !" d>!~€#6 78E。OPe9:€#6，78EE;“*|”T} >!E9 1> 3) & RSET FAN4146双线GFCI控器，门用流接地故 障断路器。在流电源的正半周，置整流器整流。 置12V并联稳压器采用%精密温度补带隙基+。 精密的基+电路*精密的感应放大器的组合，提 % 精确的接地故障容差。外部 的参数选择范围更 广泛和更廉。由所需静态电流较，可采用 的外部/联电阻(R1)，大大降电阻的耗。12V 并联稳压器感应放大器(A1)的非反相输端(AC接 地参考)提 参考电压VREF，并0给延时定时器(t1)、 比较器(C1&C2)和晶闸管驱动器提 压。 感应变压器的次级绕组直接直流耦合!感应放大器 的反相输端引脚5(VFB)。电阻RSET将感应变压器的 次 级 绕 组 电 流 在 引 脚6 (AmpOut) 处 转 换 成 电 压 。 该电压*置窗口比较器(C 1 和C 2 )进行比较，如果 AmpOut的电压超过阈电压±VTH ，窗口比较器就1 触发部延时定时器。如果窗口比较器的输2瞬间 LOW，3定时器t1 复4。如果在t1 脉5结束时，窗口 比较器输2直HIGH，3晶闸管驱动器启动电流 源I1 ，禁止Q1 。然后电流源I1 开启外部晶闸管，给电 磁阀通电，打开连接负载的接触开6，7而消除有害 接地故障。窗口比较器许检测正的或负的IFAULT" 号，89赖电源电压的相4。当引脚3(LINE)的电 压7.5V时，部欠压闭锁电路将6闭晶闸管驱动 器。杜绝晶闸管阳极电压65 V时晶闸管继续给螺 线管通电。 感应变压器通常都有由复合钢环或者固:铁氧 :成的环形磁芯。般情;绕1000匝。变压器?级通常 匝，流火线和零线穿过该环形磁芯#央。当接地 故障2现时，流火线*零线的电流2现差。通过 将?级差动电流除?级*次级间的匝比就可得! %变压器的次级电流。 AmpOut 的 " 号 必 须 超 过 窗 口 比 较 器 的 阈  电 压 VTH，持续时间超过延时定时器时间，计算如 1)Š?6g。) ‹Œ1: VLine (?@ 3), 10 V/Div ‹Œ2: AmpOut (?@ 6), 5 V/Div ‹Œ3: SCR (?@ 1), 1 V/Div ‹Œ4: IFAULT, 10 mA/Div ‹Œ1: VLine (?@ 3), 10 V/Div ‹Œ2: AmpOut (?@ 6), 10 V/Div ‹Œ3: VREF (?@ 4), 10 V/Div ‹Œ4: VAC -, 200 V/Div 图 6. 47mA-/0 图 5. ,-/0 ‹Œ1: VLine (?@ 3), 10 V/Div ‹Œ2: AmpOut (?@ 6), 5 V/Div ‹Œ3: SCR (?@ 1), 1 V/Div ‹Œ4: IFAULT, 10 mA/Div ‹Œ1: VLine (?@ 3), 10 V/Div ‹Œ2: AmpOut (?@ 6), 5 V/Div ‹Œ3: SCR (?@ 1), 1 V/Div ‹Œ4: IFAULT, 10 mA/Div 图 7. 57mA-/0 图 8. 57mA-/0(;( cdeTA = 25°C, $%&†‡(ˆ‰> 1)Š?6g。) 1 ms AmpOutEF”9.5 VG1 ms， $%&。 ‹Œ1: VLine (?@ 3), 10 V/Div ‹Œ2: AmpOut (?@ 6), 5 V/Div ‹Œ3: SCR (?@ 1), 1 V/Div ‹Œ4: IFAULT, 10 mA/Div ‹Œ1: VLine (?@ 3), 10 V/Div ‹Œ2: AmpOut (?@ 6), 5 V/Div ‹Œ3: SCR (?@ 1), 2 V/Div ‹Œ4: IFAULT, 10 mA/Div 图 10. 15 kW  图 9. AmpOut，>17ms?- ‹Œ1: VLine (?@ 3), 10 V/Div ‹Œ2: AmpOut (?@ 6), 5 V/Div ‹Œ3: SCR (?@ 1), 2 V/Div ‹Œ4: IFAULT, 500 mA/Div 图 11. 500 W  (ab 6, 7) ： 6.  fŽ~12 ms。 7. C.q Df ‘’“。 www.onsemi.cn 7 FAN4146 AB((FAN4146E) 2 % Difference from 255C 1.5 1 0.5 0 −0.5 −1 −1.5 −2 −25 −5 15 35 55 75 Temperature (5C) 图 12. &C(VTH)ABD % Difference from 255C 1 0.5 0 −0.5 −1 −25 −5 15 35 55 75 Temperature (5C) 图 13. &C(VREF)ABD % Difference from 255C 5 2.5 0 −2.5 −5 −25 −5 15 35 55 Temperature (5C) 图 14. SCRE&%(IOUT)ABD www.onsemi.cn 8 75 FAN4146 FG ! HIABJ K L† FAN4146SX 0°C • +70°C TSOT23 6-Lead (Pb-Free) 3,000 / Tape & Reel FAN4146ESX −35°C • +85°C TSOT23 6-Lead (Pb-Free) 3,000 / Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. SUPERSOT is a trademark of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. www.onsemi.cn 9 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS TSOT23 6−Lead CASE 419BL ISSUE O 1 SCALE 2:1 DATE 20 MAR 2018 GENERIC MARKING DIAGRAM* XXX MG G 1 XXX = Specific Device Code M = Date Code G = Pb−Free Package (Note: Microdot may be in either location) *This information is generic. Please refer to device data sheet for actual part marking. Pb−Free indicator, “G” or microdot “ G”, may or may not be present. Some products may not follow the Generic Marking. DOCUMENT NUMBER: DESCRIPTION: 98AON83292G TSOT23 6−Lead Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2018 www.onsemi.com ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com ◊ TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 www.onsemi.com 1 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative