Is Now Part of
To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
FAN73832
Half-Bridge Gate-Drive IC
Features
Description
Floating Channel for Bootstrap Operation to +600V
The FAN73832 is a half-bridge, gate-drive IC with shutdown and programmable dead-time control functions for
driving MOSFETs and IGBTs, operating up to +600V.
Typically 350mA/650mA Sourcing/Sinking Current
Driving Capability for Both Channels
Extended Allowable Negative VS Swing to -9.8V for
Signal Propagation at VDD=VBS=15V
High-Side Output in Phase of IN Signal
Built-in UVLO Functions for Both Channels
Built-in Common-Mode dv/dt Noise Canceling Circuit
Internal 400ns Minimum Dead-Time at RDT=20KΩ
Programmable Turn-on Delay-Time Control
(Dead-Time)
Applications
Fairchild’s high-voltage process and common-mode
noise canceling technique provide stable operation of
high-side driver under high dv/dt noise circumstances.
An advanced level-shift circuit allows high-side gate
driver operation up to VS=-9.8V (typical) for VBS=15V.
The UVLO circuits for both channels prevent malfunction
when VDD and VBS are lower than the specified threshold voltage.
Output drivers typically source/sink 350mA/650mA,
respectively, which is suitable for all kinds of half- and
full-bridge inverters.
SMPS
Motor Drive Inverter
Fluorescent Lamp Ballast
HID Ballast
8-SOP
8-DIP
Ordering Information
Part Number
FAN73832M(1)
FAN73832MX(1)
FAN73832N
Package
8-SOP
Pb-Free
Operating Temperature Range Packing Method
Tube
Yes
8-DIP
-40°C ~ 125°C
Tape & Reel
Tube
Note:
1. These devices passed wave soldering test by JESD22A-111.
© 2006 Fairchild Semiconductor Corporation
FAN73832 Rev. 1.0.2
www.fairchildsemi.com
FAN73832 Half-Bridge Gate-Drive IC
February 2007
FAN73832 Half-Bridge Gate-Drive IC
Typical Application Diagrams
RBOOT
VDC
DBOOT
VDD
FAN73832
1 IN
PWM
2 GND
VB
8
HO
7
VS
6
LO
5
CBOOT
3
PWM IC
Control
Shutdown
DT/ SD
4 VDD
RDT
FAN73832 Rev.01
Figure 1. Application Circuit for Half-Bridge Switching Power Supply
VDC
VCC
VDD
VB
VDD
HO
PHA
VB
HO
IN
VS
VS
PHB
Forward
IN
FAN73832
SD
M
FAN73832
Reverse
DC Motor
Controller
LO
DT/ SD
LO
DT/ SD
GND
GND
FAN73832 Rev.01
Figure 2. Application Circuit for Full-Bridge DC Motor Driver
© 2006 Fairchild Semiconductor Corporation
FAN73832 Rev. 1.0.2
www.fairchildsemi.com
2
8
VB
7
HO
6
VS
4
VDD
5
LO
2
GND
UVLO
S
Q
HS(ON/ OFF)
1
3
R
SCHMITT
TRIGGER INPUT
RDTINT
DEAD - TIME
CONTROL
UVLO
LS(ON/ OFF)
DELAY
DRIVER
DT/SD
R
DRIVER
PULSE
GEN ERATOR
IN
NOISE
CANCELLER
FAN73832 Rev:00
Figure 3. Functional Block Diagram of FAN73832
© 2006 Fairchild Semiconductor Corporation
FAN73832 Rev. 1.0.2
www.fairchildsemi.com
3
FAN73832 Half-Bridge Gate-Drive IC
Internal Block Diagram
FAN73832 Half-Bridge Gate-Drive IC
Pin Assignments
1
GND
2
DT/SD
3
VDD
4
FAN73832
IN
8
VB
7
HO
6
VS
5
LO
FAN73832 Rev:00
Figure 4. Pin Configuration (Top View)
Pin Definitions
Pin #
Name
1
IN
Description
2
GND
3
DT/SD
4
VDD
Low-Side Supply Voltage
5
LO
Low-Side Driver Output
6
VS
High-Side Floating Supply Return
7
HO
High-Side Driver Output
8
VB
High-Side Floating Supply
Logic Input
Ground
Dead-Time Control with External Resistor and Shutdown Function
© 2006 Fairchild Semiconductor Corporation
FAN73832 Rev. 1.0.2
www.fairchildsemi.com
4
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The
absolute maximum ratings are stress ratings only. TA=25°C unless otherwise specified.
Symbol
Parameter
VS
High-side offset voltage
VB
High-side floating supply voltage
Min.
Max.
Unit
VB-25
VB+0.3
V
-0.3
625
V
VS-0.3
VB+0.3
V
VHO
High-side floating output voltage HO
VDD
Low-side and logic-fixed supply voltage
-0.3
25
V
VLO
Low-side output voltage LO
-0.3
VDD+0.3
V
VIN
Logic input voltage (IN)
-0.3
VDD+0.3
V
Dead-time and shutdown control voltage
-0.3
5.0
V
VDD-25
VDD+0.3
V
50
V/ns
8-SOP
0.625
W
8-DIP
1.25
VDT/SD
GND
dVS/dt
PD(2)(3)(4)
Logic ground
Allowable offset voltage slew rate
Power dissipation
8-SOP
200
8-DIP
100
°C/W
θJA
Thermal resistance, junction-to-ambient
TJ
Junction temperature
150
°C
TSTG
Storage temperature
150
°C
Notes:
2. Mounted on 76.2 x 114.3 x 1.6mm PCB (FR-4 glass epoxy material).
3. Refer to the following standards:
JESD51-2: Integral circuits thermal test method environmental conditions - Natural convection
JESD51-3: Low effective thermal conductivity test board for leaded surface mount packages
4. Do not exceed PD under any circumstances.
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to Absolute Maximum Ratings.
Symbol
Parameter
Condition
Min.
Max.
Unit
VB
High-side floating supply voltage
VS+15
VS+20
V
VS
High-side floating supply offset voltage
6-VDD
600
V
VDD
Low-side supply voltage
15
20
V
VHO
High-side (HO) output voltage
VS
VB
V
VLO
Low-side (LO) output voltage
GND
VDD
V
VIN
Logic input voltage (IN)
GND
VDD
V
TA
Ambient temperature
-40
125
°C
© 2006 Fairchild Semiconductor Corporation
FAN73832 Rev. 1.0.2
www.fairchildsemi.com
5
FAN73832 Half-Bridge Gate-Drive IC
Absolute Maximum Ratings
VBIAS (VDD, VBS)=15.0V, RDT=20KΩ,TA=25°C, unless otherwise specified. The VIN and IIN parameters are referenced
to GND. The VO and IO parameters are referenced to VS and COM and are applicable to the respective outputs HO
and LO.
Symbol
Parameter
Condition
Min.
Typ.
Max.
Unit
SUPPLY CURRENT SECTION
IQBS
Quiescent VBS supply current
VIN=0V or 5V
35
90
IQDD
Quiescent VDD supply current
VIN=0V or 5V, RDT=20KΩ
300
450
ISD(5)
Shutdown supply current
DT/SD=GND
650
900
IPBS
Operating VBS supply current
fIN=20kHz, rms value
400
700
IPDD
Operating VDD supply current
fIN=20kHz, rms value
650
850
ILK
Offset supply leakage current
VB=VS=600V
µA
10
POWER SUPPLY SECTION
VDDUV+
VBSUV+
VDD and VBS supply under-voltage
positive going threshold
10.7
11.6
12.5
V
VDDUVVBSUV-
VDD and VBS supply under-voltage
negative going threshold
10.0
10.8
11.6
V
VDDUVH
VBSUVH
VDD supply under-voltage lockout
hysteresis
0.8
V
20
KΩ
3.0
V
DEAD-TIME CONTROL SECTION
RDTINT
VDT
Internal dead-time setting resistance
Normal voltage at DT
RDT=20KΩ
GATE DRIVER OUTPUT SECTION
VOH
High-level output voltage, VBIAS-VO
IO=20mA
1.0
VOL
Low-level output voltage, VO
IO+
Output high short-circuit pulse current
VO=0V, VIN=5V with PW