FBR130

FBR130 Schottky Rectifier FBR130 Schottky Rectifier Features • 1 Ampere, low forward voltage, less than 500mV • Compact surface mount package with the same footprint as mini-melf • Maximum package height of 0.8mm. SOD-123F Color Band Denotes Cathode Mark: 130 Absolute Maximum Ratings * Symbol Ta = 25°C unless otherwise noted Parameter Value Units VRRM Maximum Repetitive Reverse Voltage 30 V IF(AV) Average Rectified Forward Current 1 A IFSM Non Repetitive Peak Forward Current (Surge applied at rated load conditions half wave, single, phase, 60Hz) 5.5 A TSTG Storage Temperature Range -65 to +150 °C TJmax Operating Junction Temperature -65 to +125 °C Value Units * These ratings are limiting values above which the serviceability of any semiconductor device may by impaired. Thermal Characteristics Symbol Parameter RθJA Thermal Resistance, Junction to Ambient * 73 °C/W RθJL Thermal Resistance, Junction to Lead * 23 °C/W * FR-4 = 3.0 × 5.5 × 0.062” using 1.0 × 0.5” land pads. Electrical Characteristics Symbol TC = 25°C unless otherwise noted Value Units VF Forward Voltage Parameter @ IF = 500mA IF = 1000mA 0.45 0.5 V V IR Reverse Current @VR = 15V VR = 30V 100 200 µA µA ©2005 Fairchild Semiconductor Corporation FBR130 Rev. B 1 www.fairchildsemi.com Figure 1. Forward Voltage Characteristics Figure 2. Reverse Current vs Reverse Voltage 0.01 10 o 125 C 1 o Reverse Current, IR[A] Forward Current, IF[A] 125 C o 0.1 100 C o 0.01 1E-3 75 C o 25 C 1E-3 o 100 C 1E-4 o 75 C 1E-5 o 25 C 1E-4 0.0 1E-6 0.2 0.4 0.6 0.8 5 10 15 20 25 30 Reverse Voltage, VR[V] Forward Voltage Drop, VF[V] Figure 3. Total Capacitance 300 Juntion Capacitance, CJ[pF] 267 233 200 167 133 100 67 33 0 0 5 10 15 20 25 30 Reverse Voltage, V R [V] FBR130 Rev. B 2 www.fairchildsemi.com FBR130 Schottky Rectifier Typical Performance Characteristics FBR130 Schottky Rectifier Typical Performance Characteristics SOD-123F Dimensions in Millimeters FBR130 Rev. B 3 www.fairchildsemi.com The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ ActiveArray™ Bottomless™ Build it Now™ CoolFET™ CROSSVOLT™ DOME™ EcoSPARK™ E2CMOS™ EnSigna™ FACT™ FACT Quiet Series™ FAST® FASTr™ FPS™ FRFET™ GlobalOptoisolator™ GTO™ HiSeC™ I2C™ i-Lo™ ImpliedDisconnect™ IntelliMAX™ Across the board. Around the world.™ The Power Franchise® Programmable Active Droop™ ISOPLANAR™ LittleFET™ MICROCOUPLER™ MicroFET™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ OCX™ OCXPro™ OPTOLOGIC® OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerEdge™ PowerSaver™ PowerTrench® QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ µSerDes™ SILENT SWITCHER® SMART START™ SPM™ Stealth™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic® TINYOPTO™ TruTranslation™ UHC™ UltraFET® UniFET™ VCX™ Wire™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I16 4 FBR130 Rev. B www.fairchildsemi.com FBR130 Schottky Rectifier TRADEMARKS