FCB199N65S3

FCB199N65S3 MOSFET – Power, N-Channel, SUPERFET III, Easy Drive 650 V, 14 A, 199 mW Description SUPERFET III MOSFET is ON Semiconductor’s brand−new high voltage super−junction (SJ) MOSFET family that is utilizing charge balance technology for outstanding low on−resistance and lower gate charge performance. This advance technology is tailored to minimize conduction loss, provide superior switching performance, and withstand extreme dv/dt rate. Consequently, SUPERFET III MOSFET is very suitable for various power system miniaturization and higher efficiency. www.onsemi.com VDSS RDS(ON) MAX ID MAX 650 V 199 mW @ 10 V 14 A D Features • • • • • • 700 V @ TJ = 150°C Typ. RDS(on) = 170 mW Ultra Low Gate Charge (Typ. Qg = 30 nC) Low Effective Output Capacitance (Typ. Coss(eff.) = 277 pF) 100% Avalanche Tested These Devices are Pb−Free and are RoHS Compliant G S POWER MOSFET D Applications • Telecom / Server Power Supplies • Industrial Power Supplies • UPS / Solar G S D2−PAK CASE 418AJ MARKING DIAGRAM $Y&Z&3&K FCB 199N65S3 $Y &Z &3 &K FCB199N65S3 = ON Semiconductor Logo = Assembly Plant Code = Data Code (Year & Week) = Lot = Specific Device Code ORDERING INFORMATION See detailed ordering and shipping information on page 2 of this data sheet. © Semiconductor Components Industries, LLC, 2017 August, 2019 − Rev. 4 1 Publication Order Number: FCB199N65S3/D FCB199N65S3 ABSOLUTE MAXIMUM RATINGS (TC = 25°C, Unless otherwise specified) Symbol Parameter VDSS Drain to Source Voltage VGSS Gate to Source Voltage ID Drain Current Value Unit 650 V DC ±30 V AC (f > 1 Hz) ±30 V Continuous (TC = 25°C) 14 A Continuous (TC = 100°C) 9 Pulsed (Note 1) IDM Drain Current 35 A EAS Single Pulsed Avalanche Energy (Note 2) 76 mJ IAS Avalanche Current (Note 1) 2.5 A EAR Repetitive Avalanche Energy (Note 1) 0.98 mJ dv/dt MOSFET dv/dt 100 V/ns Peak Diode Recovery dv/dt (Note 3) 20 PD Power Dissipation (TC = 25°C) 98 W 0.79 W/°C −55 to +150 °C 300 °C Derate Above 25°C TJ, TSTG TL Operating and Storage Temperature Range Maximum Lead Temperature for Soldering, 1/8″ from Case for 5 s Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. Repetitive rating: pulse-width limited by maximum junction temperature. 2. IAS = 2.5 A, RG = 25 W, starting TJ = 25°C. 3. ISD ≤ 7 A, di/dt ≤ 200 A/ms, VDD ≤ 400 V, starting TJ = 25°C. THERMAL CHARACTERISTICS Symbol RqJC Parameter Thermal Resistance, Junction to Case, Max. Thermal Resistance, Junction to Ambient, Max. (Note 4) Value Unit 1.27 _C/W 40 4. Device on 1 in2 pad 2 oz copper pad on 1.5 x 1.5 in. board of FR−4 material. PACKAGE MARKING AND ORDERING INFORMATION Part Number Top Marking Package Reel Size Tape Width Shipping† FCB199N65S3 FCB199N65S3 D2−PAK 330 mm 24 mm 800 / Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. www.onsemi.com 2 FCB199N65S3 ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted) Parameter Symbol Test Conditions Min Typ Max Unit OFF CHARACTERISTICS BVDSS Drain to Source Breakdown Voltage VGS = 0 V, ID = 1 mA, TJ = 25_C 650 V VGS = 0 V, ID = 1 mA, TJ = 150_C 700 V DBVDSS/DTJ Breakdown Voltage Temperature Coefficient ID = 1 mA, Referenced to 25_C IDSS Zero Gate Voltage Drain Current VDS = 650 V, VGS = 0 V IGSS Gate to Body Leakage Current 0.6 V/_C 1 mA ±100 nA 4.5 V 199 mW 0.89 VDS = 520 V, TC = 125_C VGS = ±30 V, VDS = 0 V ON CHARACTERISTICS VGS(th) Gate Threshold Voltage VGS = VDS, ID = 0.36 mA RDS(on) Static Drain to Source On Resistance VGS = 10 V, ID = 7 A 170 Forward Transconductance VDS = 20 V, ID = 7 A 10 S 1225 pF 30 pF gFS 2.5 DYNAMIC CHARACTERISTICS Ciss Input Capacitance Coss Output Capacitance VDS = 400 V, VGS = 0 V, f = 1 MHz Coss(eff.) Effective Output Capacitance VDS = 0 V to 400 V, VGS = 0 V 277 pF Coss(er.) Energy Related Output Capacitance VDS = 0 V to 400 V, VGS = 0 V 43 pF Total Gate Charge at 10 V VDS = 400 V, ID = 7 A, VGS = 10 V (Note 5) 30 nC 7.4 nC Qg(tot) Qgs Gate to Source Gate Charge Qgd Gate to Drain “Miller” Charge ESR Equivalent Series Resistance 13 nC f = 1 MHz 7 W VDD = 400 V, ID = 7 A, VGS = 10 V, Rg = 4.7 W (Note 5) 19 ns 23 ns SWITCHING CHARACTERISTICS td(on) Turn-On Delay Time tr Turn-On Rise Time td(off) Turn-Off Delay Time 52 ns Turn-Off Fall Time 15 ns tf SOURCE-DRAIN DIODE CHARACTERISTICS Maximum Continuous Source to Drain Diode Forward Current 14 A ISM Maximum Pulsed Source to Drain Diode Forward Current 35 A VSD Source to Drain Diode Forward Voltage VGS = 0 V, ISD = 7 A 1.2 V trr Reverse Recovery Time Qrr Reverse Recovery Charge VDD = 400 V, ISD = 7 A, dIF/dt = 100 A/ms IS 256 ns 3.5 mC Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 5. Essentially independent of operating temperature typical characteristics. www.onsemi.com 3 FCB199N65S3 TYPICAL PERFORMANCE CHARACTERISTICS 50 VGS = 10.0 V 8.0 V 7.0 V 6.5 V 6.0 V 5.5 V 10 ID, Drain Current (A) ID, Drain Current (A) 50 1 0.1 0.1 VDS = 20 V 250 ms Pulse Test 10 150°C 25°C −55°C 250 ms Pulse Test TC = 25°C 1 10 VDS, Drain−Source Voltage (V) 1 20 3 Figure 1. On−Region Characteristics 100 TC = 25°C VGS = 10 V 0.2 VGS = 20 V 10 150°C 1 25°C 0.1 10 20 30 ID, Drain Current (A) −55°C 0.001 0.0 40 100000 VGS, Gate−Source Voltage (V) 10 10000 Ciss 1000 100 Coss 10 1 0.1 0.1 VGS = 0 V f = 1 MHz Ciss = Cgs + Cgd (Cds = shorted) Coss = Cds + Cgd Crss = Cgd 1 10 100 VDS, Drain−Source Voltage (V) 0.5 1.0 1.5 VSD, Body Diode Forward Voltage (V) Figure 4. Body Diode Forward Voltage Variation vs. Source Current and Temperature Figure 3. On−Resistance Variation vs. Drain Current and Gate Voltage Capacitances (pF) VGS = 0 V 250 ms Pulse Test 0.01 0.0 0 9 Figure 2. Transfer Characteristics IS, Reverse Drain Current (A) RDS(ON), Drain−Source On−Resistance (W) 0.4 6 4 5 7 8 VGS, Gate−Source Voltage (V) Crss 8 Figure 5. Capacitance Characteristics VDS = 130 V VDS = 400 V 6 4 2 0 1000 ID = 7 A 0 5 10 15 20 25 30 Qg, Total Gate Charge (nC) 35 Figure 6. Gate Charge Characteristics www.onsemi.com 4 FCB199N65S3 TYPICAL PERFORMANCE CHARACTERISTICS (Continued) 3.0 VGS = 0 V ID = 10 mA RDS(on), Drain−Source On−Resistance (Normalized) BVDSS, Drain−Source Breakdown Voltage (Normalized) 1.2 1.1 1.0 0.9 0.8 −50 2.5 2.0 1.5 1.0 0.5 0.0 50 100 150 0 TJ, Junction Temperature (5C) 30 ms 100 ms 1 ms 10 ms 10 ID, Drain Current (A) ID, Drain Current (A) 0 50 100 150 TJ, Junction Temperature (5C) 15 100 DC 1 Operation in this Area is Limited by RDS(on) TC = 25°C TJ = 150°C Single Pulse 0.1 1 10 100 VDS, Drain−Source Voltage (V) 6 4 2 130 260 390 520 VDS, Drain to Source Voltage (V) 5 50 75 100 125 TC, Case Temperature (5C) 150 Figure 10. Maximum Drain Current vs. Case Temperature 8 0 0 10 0 25 1000 Figure 9. Maximum Safe Operating Area EOSS, (mJ) −50 Figure 8. On−Resistance Variation vs. Temperature Figure 7. Breakdown Voltage Variation vs. Temperature 0.01 VGS = 10 V ID = 7 A 650 Figure 11. EOSS vs. Drain to Source Voltage www.onsemi.com 5 FCB199N65S3 r(t), Normalized Effective Transient Thermal Resistance TYPICAL PERFORMANCE CHARACTERISTICS (Continued) 2 1 0.1 DUTY CYCLE − DESCENDING ORDER D = 0.5 0.2 0.1 0.05 0.02 0.01 PDM t1 0.01 0.001 −5 10 SINGLE PULSE −4 10 t2 ZqJC(t) = r(t) x RqJC RqJC = 1.27°C/W Peak TJ = PDM x ZqJC(t) + TC Duty Cycle, D = t1 / t2 −3 −2 −1 10 10 10 t, Rectangular Pulse Duration (sec) Figure 12. Transient Thermal Response Curve www.onsemi.com 6 0 10 1 10 FCB199N65S3 VGS RL Qg VDS VGS Qgs Qgd DUT IG = Const. Charge Figure 13. Gate Charge Test Circuit & Waveform RL VDS VDS 90% 90% 90% VDD VGS RG VGS DUT VGS 10% td(on) 10% tr td(off) ton tf toff Figure 14. Resistive Switching Test Circuit & Waveforms L E AS + 1 @ LI AS 2 VDS BVDSS ID IAS RG VDD DUT VGS 2 ID(t) VDD VDS(t) tp tp Figure 15. Unclamped Inductive Switching Test Circuit & Waveforms www.onsemi.com 7 Time FCB199N65S3 + DUT VDS − ISD L Driver RG Same Type as DUT VGS − dv/dt controlled by RG − ISD controlled by pulse period D+ VGS (Driver) VDD Gate Pulse Width Gate Pulse Period 10 V IFM, Body Diode Forward Current ISD (DUT) di/dt IRM Body Diode Reverse Current Body Diode Recovery dv/dt VDS (DUT) VDD VSD Body Diode Forward Voltage Drop Figure 16. Peak Diode Recovery dv/dt Test Circuit & Waveforms SUPERFET is a registered trademark of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. www.onsemi.com 8 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS D2PAK−3 (TO−263, 3−LEAD) CASE 418AJ ISSUE F SCALE 1:1 GENERIC MARKING DIAGRAMS* XX XXXXXXXXX AWLYWWG IC DOCUMENT NUMBER: DESCRIPTION: XXXXXXXXG AYWW Standard 98AON56370E AYWW XXXXXXXXG AKA Rectifier XXXXXX XXYMW SSG DATE 11 MAR 2021 XXXXXX = Specific Device Code A = Assembly Location WL = Wafer Lot Y = Year WW = Work Week W = Week Code (SSG) M = Month Code (SSG) G = Pb−Free Package AKA = Polarity Indicator *This information is generic. Please refer to device data sheet for actual part marking. Pb−Free indicator, “G” or microdot “ G”, may or may not be present. Some products may not follow the Generic Marking. Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. D2PAK−3 (TO−263, 3−LEAD) PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2018 www.onsemi.com onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com onsemi Website: www.onsemi.com ◊ TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative