ON Semiconductor
Is Now
To learn more about onsemi™, please visit our website at
www.onsemi.com
onsemi and and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or
subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi
product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without
notice. The information herein is provided “as-is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality,
or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all
liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws,
regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/
or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application
by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized
for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for
implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees,
subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative
Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Other names and brands may be claimed as the property of others.
FDB045AN08A0-F085 N-Channel PowerTrench® MOSFET
FDB045AN08A0-F085
N-Channel PowerTrench® MOSFET
Applications
75V, 80A, 4.5m:
• 42V Automotive Load Control
Features
• Starter / Alternator Systems
• rDS(ON) = 3.9m: (Typ.), VGS = 10V, ID = 80A
• Electronic Power Steering Systems
• Qg(tot) = 92nC (Typ.), VGS = 10V
• Electronic Valve Train Systems
• Low Miller Charge
• DC-DC converters and Off-line UPS
• Low QRR Body Diode
• Distributed Power Architectures and VRMs
• UIS Capability (Single Pulse and Repetitive Pulse)
• Primary Switch for 24V and 48V systems
• Qualified to AEC Q101
• RoHS Compliant
Formerly developmental type 82684
D
GATE
G
SOURCE
TO-263AB
FDB SERIES
DRAIN
(FLANGE)
S
MOSFET Maximum Ratings TC = 25°C unless otherwise noted
Symbol
VDSS
VGS
Parameter
Ratings
Units
Drain to Source Voltage
75
V
Gate to Source Voltage
r20
V
90
19
A
A
Drain Current
Continuous (TC < 137oC, VGS = 10V)
ID
Continuous (Tamb = 25oC, VGS = 10V, with RTJA = 43oC/W)
Pulsed
Single Pulse Avalanche Energy (Note 1)
EAS
Power dissipation
PD
TJ, TSTG
Derate above 25oC
Operating and Storage Temperature
Figure 4
A
600
mJ
310
W
2.0
-55 to 175
W/oC
o
C
Thermal Characteristics
0.48
o
C/W
Thermal Resistance Junction to Ambient TO-263 (Note 2)
62
o
C/W
Thermal Resistance Junction to Ambient TO-263, 1in2 copper pad area
43
o
C/W
RTJC
Thermal Resistance Junction to Case TO-263
RTJA
RTJA
This product has been designed to meet the extreme test conditions and environment demanded by the automotive industry. For
a copy of the requirements, see AEC Q101 at: http://www.aecouncil.com/
All ON Semiconductor products are manufactured, assembled and tested under ISO9000 and QS9000 quality systems
certification.
©2010 Semiconductor Components Industries, LLC.
September-2017, Rev. 1
Publication Order Number:
FDB045AN08A0-F085/D
Device Marking
FDB045AN08A0
Device
FDB045AN08A0-F085
Package
TO-263AB
Reel Size
330mm
Tape Width
24mm
Quantity
800 units
Electrical Characteristics TC = 25°C unless otherwise noted
Symbol
Parameter
Test Conditions
Min
Typ
Max
Units
75
-
-
-
V
-
1
-
-
250
-
-
r100
nA
-
4
V
Off Characteristics
BVDSS
Drain to Source Breakdown Voltage
IDSS
Zero Gate Voltage Drain Current
IGSS
Gate to Source Leakage Current
ID = 250PA, VGS = 0V
VDS = 60V
VGS = 0V
VGS = r20V
TC = 150oC
PA
On Characteristics
VGS(TH)
Gate to Source Threshold Voltage
rDS(ON)
Drain to Source On Resistance
VGS = VDS, ID = 250PA
2
-
0.0039 0.0045
ID = 37A, VGS = 6V
-
0.0056 0.0084
-
0.008
0.011
-
6600
-
pF
-
1000
-
pF
-
240
-
pF
92
138
nC
ID = 80A, VGS = 10V
ID = 80A, VGS = 10V,
TJ = 175oC
:
Dynamic Characteristics
CISS
Input Capacitance
CRSS
Reverse Transfer Capacitance
Qg(TH)
Threshold Gate Charge
Qgs2
Gate Charge Threshold to Plateau
COSS
Output Capacitance
Qg(TOT)
Total Gate Charge at 10V
Qgs
Gate to Source Gate Charge
Qgd
Gate to Drain “Miller” Charge
VDS = 25V, VGS = 0V,
f = 1MHz
VGS = 0V to 10V
VGS = 0V to 2V
VDD = 40V
ID = 80A
Ig = 1.0mA
-
11
17
nC
-
27
-
nC
-
16
-
nC
-
21
-
nC
Switching Characteristics (VGS = 10V)
tON
Turn-On Time
-
-
160
ns
Turn-On Delay Time
-
18
-
ns
tr
Rise Time
-
88
-
ns
-
40
-
ns
tf
Fall Time
-
45
-
ns
Turn-Off Time
-
-
128
ns
ISD = 80A
V
ISD = 75A, dISD/dt = 100A/Ps
td(ON)
td(OFF)
Turn-Off Delay Time
tOFF
VDD = 40V, ID = 80A
VGS = 10V, RGS = 3.3:
Drain-Source Diode Characteristics
VSD
Source to Drain Diode Voltage
trr
Reverse Recovery Time
QRR
Reverse Recovered Charge
-
-
1.25
ISD = 40A
-
-
1.0
V
-
-
53
ns
ISD = 75A, dISD/dt = 100A/Ps
-
-
54
nC
Notes:
1: Starting TJ = 25°C, L = 0.48mH, IAS = 50A.
2: Pulse Width = 100s
www.onsemi.com
2
FDB045AN08A0-F085 N-Channel PowerTrench® MOSFET
Package Marking and Ordering Information
POWER DISSIPATION MULTIPLIER
1.2
200
CURRENT LIMITED
BY PACKAGE
ID, DRAIN CURRENT (A)
1.0
0.8
0.6
0.4
160
120
80
40
0.2
0
0
25
50
75
100
150
125
0
175
25
50
75
TC , CASE TEMPERATURE (oC)
100
125
150
175
TC, CASE TEMPERATURE (oC)
Figure 1. Normalized Power Dissipation vs
Ambient Temperature
Figure 2. Maximum Continuous Drain Current vs
Case Temperature
2
ZTJC, NORMALIZED
THERMAL IMPEDANCE
1
DUTY CYCLE - DESCENDING ORDER
0.5
0.2
0.1
0.05
0.02
0.01
PDM
0.1
t1
t2
NOTES:
DUTY FACTOR: D = t1/t2
PEAK TJ = PDM x ZTJC x RTJC + TC
SINGLE PULSE
0.01
10-5
10-4
10-3
10-2
10-1
100
101
t, RECTANGULAR PULSE DURATION (s)
Figure 3. Normalized Maximum Transient Thermal Impedance
2000
TC = 25oC
FOR TEMPERATURES
ABOVE 25oC DERATE PEAK
IDM, PEAK CURRENT (A)
1000
CURRENT AS FOLLOWS:
175 - TC
I = I25
VGS = 10V
150
100
50
10-5
TRANSCONDUCTANCE
MAY LIMIT CURRENT
IN THIS REGION
10-4
10-3
10-2
t, PULSE WIDTH (s)
Figure 4. Peak Current Capability
www.onsemi.com
3
10-1
100
101
FDB045AN08A0-F085 N-Channel PowerTrench® MOSFET
Typical Characteristics TC = 25°C unless otherwise noted
500
2000
IAS, AVALANCHE CURRENT (A)
10Ps
1000
ID, DRAIN CURRENT (A)
100Ps
100
1ms
10ms
10
OPERATION IN THIS
AREA MAY BE
LIMITED BY rDS(ON)
1
DC
SINGLE PULSE
TJ = MAX RATED
TC = 25oC
0.1
0.1
100
STARTING TJ = 25oC
10
STARTING TJ = 150oC
1
1
10
VDS, DRAIN TO SOURCE VOLTAGE (V)
100
Figure 5. Forward Bias Safe Operating Area
.01
100
Figure 6. Unclamped Inductive Switching
Capability
150
PULSE DURATION = 80Ps
DUTY CYCLE = 0.5% MAX
VDD = 15V
90
TJ = 175oC
60
TJ = -55oC
TJ = 25oC
VGS = 6V
90
60
VGS = 5V
TC = 25oC
PULSE DURATION = 80Ps
DUTY CYCLE = 0.5% MAX
30
30
0
4.0
VGS = 7V
VGS = 10V
120
ID, DRAIN CURRENT (A)
120
0
4.5
5.0
5.5
VGS , GATE TO SOURCE VOLTAGE (V)
0
6.0
Figure 7. Transfer Characteristics
0.5
1.0
VDS , DRAIN TO SOURCE VOLTAGE (V)
1.5
Figure 8. Saturation Characteristics
2.5
7
PULSE DURATION = 80Ps
DUTY CYCLE = 0.5% MAX
NORMALIZED DRAIN TO SOURCE
ON RESISTANCE
DRAIN TO SOURCE ON RESISTANCE(m:)
0.1
1
10
tAV, TIME IN AVALANCHE (ms)
NOTE: Refer to ON Semiconductor Application Notes AN7514 and AN7515
150
ID , DRAIN CURRENT (A)
If R = 0
tAV = (L)(IAS)/(1.3*RATED BVDSS - VDD)
If Rz 0
tAV = (L/R)ln[(IAS*R)/(1.3*RATED BVDSS - VDD) +1]
6
VGS = 6V
5
4
VGS = 10V
PULSE DURATION = 80Ps
DUTY CYCLE = 0.5% MAX
2.0
1.5
1.0
VGS = 10V, ID =80A
3
0
20
40
ID, DRAIN CURRENT (A)
60
80
Figure 9. Drain to Source On Resistance vs Drain
Current
0.5
-80
-40
0
40
80
120
160
TJ, JUNCTION TEMPERATURE (oC)
Figure 10. Normalized Drain to Source On
Resistance vs Junction Temperature
www.onsemi.com
4
200
FDB045AN08A0-F085 N-Channel PowerTrench® MOSFET
Typical Characteristics TC = 25°C unless otherwise noted
1.2
1.15
ID = 250PA
NORMALIZED DRAIN TO SOURCE
BREAKDOWN VOLTAGE
NORMALIZED GATE
THRESHOLD VOLTAGE
VGS = VDS, ID = 250PA
1.0
0.8
0.6
0.4
-80
-40
0
40
80
120
160
TJ, JUNCTION TEMPERATURE (oC)
1.05
1.00
0.95
0.90
-80
200
-40
0
10000
80
120
160
200
Figure 12. Normalized Drain to Source
Breakdown Voltage vs Junction Temperature
VGS , GATE TO SOURCE VOLTAGE (V)
10
CISS CGS + CGD
COSS # CDS + CGD
1000
CRSS CGD
VDD = 40V
8
6
4
WAVEFORMS IN
DESCENDING ORDER:
ID = 80A
ID = 10A
2
VGS = 0V, f = 1MHz
100
0.1
40
TJ , JUNCTION TEMPERATURE (oC)
Figure 11. Normalized Gate Threshold Voltage vs
Junction Temperature
C, CAPACITANCE (pF)
1.10
0
75
1
10
VDS , DRAIN TO SOURCE VOLTAGE (V)
Figure 13. Capacitance vs Drain to Source
Voltage
0
25
50
Qg, GATE CHARGE (nC)
75
100
Figure 14. Gate Charge Waveforms for Constant
Gate Currents
www.onsemi.com
5
FDB045AN08A0-F085 N-Channel PowerTrench® MOSFET
Typical Characteristics TC = 25°C unless otherwise noted
VDS
BVDSS
tP
L
VDS
VARY tP TO OBTAIN
REQUIRED PEAK IAS
IAS
+
RG
VDD
VDD
-
VGS
DUT
tP
IAS
0V
0
0.01:
tAV
Figure 15. Unclamped Energy Test Circuit
Figure 16. Unclamped Energy Waveforms
VDS
VDD
Qg(TOT)
VDS
L
VGS
VGS
VGS = 10V
+
Qgs2
VDD
DUT
VGS = 2V
Ig(REF)
0
Qg(TH)
Qgs
Qgd
Ig(REF)
0
Figure 17. Gate Charge Test Circuit
Figure 18. Gate Charge Waveforms
VDS
tON
tOFF
td(ON)
td(OFF)
RL
tr
VDS
tf
90%
90%
+
VGS
VDD
-
10%
0
10%
DUT
90%
RGS
VGS
50%
50%
PULSE WIDTH
VGS
0
Figure 19. Switching Time Test Circuit
10%
Figure 20. Switching Time Waveforms
www.onsemi.com
6
FDB045AN08A0-F085 N-Channel PowerTrench® MOSFET
Test Circuits and Waveforms
7 – 7
-0 $
3 '0 = -------------------------5T -$
(EQ. 1)
In using surface mount devices such as the TO-263
package, the environment in which it is applied will have a
significant influence on the part’s current and maximum
power dissipation ratings. Precise determination of PDM is
complex and influenced by many factors:
1. Mounting pad area onto which the device is attached and
whether there is copper on one side or both sides of the
board.
80
RTJA = 26.51+ 19.84/(0.262+Area) EQ.2
RTJA = 26.51+ 128/(1.69+Area) EQ.3
60
RTJA (oC/W)
The maximum rated junction temperature, TJM, and the
thermal resistance of the heat dissipating path determines
the maximum allowable device power dissipation, PDM, in an
application.
Therefore the application’s ambient
temperature, TA (oC), and thermal resistance RTJA (oC/W)
must be reviewed to ensure that TJM is never exceeded.
Equation 1 mathematically represents the relationship and
serves as the basis for establishing the rating of the part.
40
20
3. The use of external heat sinks.
4. The use of thermal vias.
5. Air flow and board orientation.
6. For non steady state applications, the pulse width, the
duty cycle and the transient thermal response of the part,
the board and the environment they are in.
ON Semiconductor provides thermal information to
assist the designer’s preliminary application evaluation.
Figure 21 defines the RTJA for the device as a function
of the top copper (component side) area. This is for a
horizontally positioned FR-4 board with 1oz copper after
1000 seconds of steady state power with no air flow. This
graph provides the necessary information for calculation of
the steady state junction
temperature
or
power
dissipation. Pulse applications can be evaluated using
the ON Semiconductor device Spice thermal model or
manually utilizing the normalized maximum transient thermal
impedance curve.
Thermal resistances corresponding to other copper areas
can be obtained from Figure 21 or by calculation using
Equation 2 or 3. Equation 2 is used for copper area defined in
inches square and equation 3 is for area in centimeters
square. The area, in square inches or square centimeters is
the top copper area including the gate and source pads.
+ $UHD
(EQ. 2)
Area in Inches Squared
+ $UHD
5 T -$ = + ------------------------------------
1
10
(6.45)
AREA, TOP COPPER AREA in2 (cm2)
(64.5)
Figure 21. Thermal Resistance vs Mounting
Pad Area
2. The number of copper layers and the thickness of the
board.
5 T -$ = + ---------------------------------------
0.1
(0.645)
(EQ. 3)
Area in Centimeter Squared
www.onsemi.com
7
FDB045AN08A0-F085 N-Channel PowerTrench® MOSFET
Thermal Resistance vs. Mounting Pad Area
.SUBCKT FDB045AN08A0 2 1 3 ;
CA 12 8 1.5e-9
CB 15 14 1.5e-9
CIN 6 8 6.4e-9
rev March 2002
LDRAIN
DPLCAP
10
DBODY 7 5 DBODYMOD
DBREAK 5 11 DBREAKMOD
DPLCAP 10 5 DPLCAPMOD
RSLC2
5
51
ESLC
EVTHRES
+ 19 8
+
LGATE
GATE
1
11
+
17
EBREAK 18
-
50
RDRAIN
6
8
ESG
DBREAK
+
LDRAIN 2 5 1e-9
LGATE 1 9 4.81e-9
LSOURCE 3 7 4.63e-9
RLDRAIN
RSLC1
51
EBREAK 11 7 17 18 82.3
EDS 14 8 5 8 1
EGS 13 8 6 8 1
ESG 6 10 6 8 1
EVTHRES 6 21 19 8 1
EVTEMP 20 6 18 22 1
IT 8 17 1
DRAIN
2
5
EVTEMP
RGATE + 18 22
9
20
21
16
DBODY
MWEAK
6
MMED
MSTRO
RLGATE
LSOURCE
CIN
8
7
SOURCE
3
RSOURCE
RLSOURCE
MMED 16 6 8 8 MMEDMOD
MSTRO 16 6 8 8 MSTROMOD
MWEAK 16 21 8 8 MWEAKMOD
RBREAK 17 18 RBREAKMOD 1
RDRAIN 50 16 RDRAINMOD 9e-4
RGATE 9 20 1.36
RLDRAIN 2 5 10
RLGATE 1 9 48.1
RLSOURCE 3 7 46.3
RSLC1 5 51 RSLCMOD 1e-6
RSLC2 5 50 1e3
RSOURCE 8 7 RSOURCEMOD 2.3e-3
RVTHRES 22 8 RVTHRESMOD 1
RVTEMP 18 19 RVTEMPMOD 1
S1A
S1B
S2A
S2B
S1A
12
S2A
13
8
14
13
S1B
CA
RBREAK
15
17
18
RVTEMP
S2B
13
CB
6
8
EGS
19
14
+
+
VBAT
5
8
EDS
-
IT
-
+
8
22
RVTHRES
6 12 13 8 S1AMOD
13 12 13 8 S1BMOD
6 15 14 13 S2AMOD
13 15 14 13 S2BMOD
VBAT 22 19 DC 1
ESLC 51 50 VALUE={(V(5,51)/ABS(V(5,51)))*(PWR(V(5,51)/(1e-6*250),10))}
.MODEL DBODYMOD D (IS = 2.4e-11 N = 1.04 RS = 1.76e-3 TRS1 = 2.7e-3 TRS2 = 2e-7 XTI=3.9 CJO = 4.35e-9 TT = 1e-8
M = 5.4e-1)
.MODEL DBREAKMOD D (RS = 1.5e-1 TRS1 = 1e-3 TRS2 = -8.9e-6)
.MODEL DPLCAPMOD D (CJO = 1.35e-9 IS = 1e-30 N = 10 M = 0.53)
.MODEL MMEDMOD NMOS (VTO = 3.7 KP = 9 IS =1e-30 N = 10 TOX = 1 L = 1u W = 1u RG = 1.36)
.MODEL MSTROMOD NMOS (VTO = 4.4 KP = 250 IS = 1e-30 N = 10 TOX = 1 L = 1u W = 1u)
.MODEL MWEAKMOD NMOS (VTO = 3.05 KP = 0.03 IS = 1e-30 N = 10 TOX = 1 L = 1u W = 1u RG = 1.36e1 RS = 0.1)
.MODEL RBREAKMOD RES (TC1 = 1.05e-3 TC2 = -9e-7)
.MODEL RDRAINMOD RES (TC1 = 1.9e-2 TC2 = 4e-5)
.MODEL RSLCMOD RES (TC1 = 1.3e-3 TC2 = 1e-5)
.MODEL RSOURCEMOD RES (TC1 = 1e-3 TC2 = 1e-6)
.MODEL RVTHRESMOD RES (TC1 = -6e-3 TC2 = -1.9e-5)
.MODEL RVTEMPMOD RES (TC1 = -2.4e-3 TC2 = 1e-6)
.MODEL S1AMOD VSWITCH (RON = 1e-5 ROFF = 0.1 VON = -4.0 VOFF= -1.5)
.MODEL S1BMOD VSWITCH (RON = 1e-5 ROFF = 0.1 VON = -1.5 VOFF= -4.0)
.MODEL S2AMOD VSWITCH (RON = 1e-5 ROFF = 0.1 VON = -1.0 VOFF= 0.5)
.MODEL S2BMOD VSWITCH (RON = 1e-5 ROFF = 0.1 VON = 0.5 VOFF= -1.0)
.ENDS
Note: For further discussion of the PSPICE model, consult A New PSPICE Sub-Circuit for the Power MOSFET Featuring Global
Temperature Options; IEEE Power Electronics Specialist Conference Records, 1991, written by William J. Hepp and C. Frank
Wheatley.
www.onsemi.com
8
FDB045AN08A0-F085 N-Channel PowerTrench® MOSFET
PSPICE Electrical Model
REV March 2002
template FDB045AN08A0 n2,n1,n3
electrical n2,n1,n3
{
var i iscl
dp..model dbodymod = (isl = 2.4e-11, n1 = 1.04, rs = 1.76e-3, trs1 = 2.7e-3, trs2 = 2e-7, xti = 3.9, cjo = 4.35e-9, tt = 1e-8, m = 5.4e-1)
dp..model dbreakmod = (rs = 1.5e-1, trs1 = 1e-3, trs2 = -8.9e-6)
dp..model dplcapmod = (cjo = 1.35e-9, isl =10e-30, nl =10, m = 0.53)
m..model mmedmod = (type=_n, vto = 3.7, kp = 9, is =1e-30, tox=1)
m..model mstrongmod = (type=_n, vto = 4.4, kp = 250, is = 1e-30, tox = 1)
m..model mweakmod = (type=_n, vto = 3.05, kp = 0.03, is = 1e-30, tox = 1, rs=0.1)
sw_vcsp..model s1amod = (ron = 1e-5, roff = 0.1, von = -4.0, voff = -1.5)
sw_vcsp..model s1bmod = (ron =1e-5, roff = 0.1, von = -1.5, voff = -4.0)
sw_vcsp..model s2amod = (ron = 1e-5, roff = 0.1, von = -1.0, voff = 0.5)
sw_vcsp..model s2bmod = (ron = 1e-5, roff = 0.1, von = 0.5, voff = -1.0)
LDRAIN
DPLCAP
c.ca n12 n8 = 1.5e-9
c.cb n15 n14 = 1.5e-9
c.cin n6 n8 = 6.4e-9
10
RLDRAIN
RSLC1
51
RSLC2
dp.dbody n7 n5 = model=dbodymod
dp.dbreak n5 n11 = model=dbreakmod
dp.dplcap n10 n5 = model=dplcapmod
ISCL
RDRAIN
6
8
ESG
EVTHRES
+ 19 8
+
LGATE
GATE
1
EVTEMP
RGATE + 18 22
9
20
21
DBODY
MWEAK
EBREAK
+
17
18
-
MMED
MSTRO
m.mmed n16 n6 n8 n8 = model=mmedmod, l=1u, w=1u
m.mstrong n16 n6 n8 n8 = model=mstrongmod, l=1u, w=1u
m.mweak n16 n21 n8 n8 = model=mweakmod, l=1u, w=1u
CIN
8
LSOURCE
SOURCE
3
7
RSOURCE
RLSOURCE
S1A
12
S2A
RBREAK
15
14
13
13
8
S1B
CA
11
16
6
RLGATE
res.rbreak n17 n18 = 1, tc1 = 1.05e-3, tc2 = -9e-7
res.rdrain n50 n16 = 9e-4, tc1 = 1.9e-2, tc2 = 4e-5
res.rgate n9 n20 = 1.36
res.rldrain n2 n5 = 10
res.rlgate n1 n9 = 48.1
res.rlsource n3 n7 = 46.3
res.rslc1 n5 n51= 1e-6, tc1 = 1e-3, tc2 =1e-5
res.rslc2 n5 n50 = 1e3
res.rsource n8 n7 = 2.3e-3, tc1 = 1e-3, tc2 =1e-6
res.rvtemp n18 n19 = 1, tc1 = -2.4e-3, tc2 = 1e-6
res.rvthres n22 n8 = 1, tc1 = -6e-3, tc2 = -1.9e-5
DBREAK
50
-
i.it n8 n17 = 1
l.ldrain n2 n5 = 1e-9
l.lgate n1 n9 = 4.81e-9
l.lsource n3 n7 = 4.63e-9
DRAIN
2
5
17
18
RVTEMP
S2B
13
CB
6
8
EGS
19
VBAT
5
8
EDS
-
IT
14
+
+
-
+
8
22
RVTHRES
spe.ebreak n11 n7 n17 n18 = 82.3
spe.eds n14 n8 n5 n8 = 1
spe.egs n13 n8 n6 n8 = 1
spe.esg n6 n10 n6 n8 = 1
spe.evtemp n20 n6 n18 n22 = 1
spe.evthres n6 n21 n19 n8 = 1
sw_vcsp.s1a n6 n12 n13 n8 = model=s1amod
sw_vcsp.s1b n13 n12 n13 n8 = model=s1bmod
sw_vcsp.s2a n6 n15 n14 n13 = model=s2amod
sw_vcsp.s2b n13 n15 n14 n13 = model=s2bmod
v.vbat n22 n19 = dc=1
equations {
i (n51->n50) +=iscl
iscl: v(n51,n50) = ((v(n5,n51)/(1e-9+abs(v(n5,n51))))*((abs(v(n5,n51)*1e6/250))** 10))
}
}
www.onsemi.com
9
FDB045AN08A0-F085 N-Channel PowerTrench® MOSFET
SABER Electrical Model
th
REV 23 March 2002
JUNCTION
FDB045AN08A0T
CTHERM1 th 6 6.45e-3
CTHERM2 6 5 3e-2
CTHERM3 5 4 1.4e-2
CTHERM4 4 3 1.65e-2
CTHERM5 3 2 4.85e-2
CTHERM6 2 tl 1e-1
RTHERM1
CTHERM1
6
RTHERM1 th 6 3.24e-3
RTHERM2 6 5 8.08e-3
RTHERM3 5 4 2.28e-2
RTHERM4 4 3 1e-1
RTHERM5 3 2 1.1e-1
RTHERM6 2 tl 1.4e-1
RTHERM2
CTHERM2
5
SABER Thermal Model
SABER thermal model FDB045AN08A0T
template thermal_model th tl
thermal_c th, tl
{
ctherm.ctherm1 th 6 = 6.45e-3
ctherm.ctherm2 6 5 = 3e-2
ctherm.ctherm3 5 4 = 1.4e-2
ctherm.ctherm4 4 3 = 1.65e-2
ctherm.ctherm5 3 2 = 4.85e-2
ctherm.ctherm6 2 tl = 1e-1
RTHERM3
CTHERM3
4
RTHERM4
rtherm.rtherm1 th 6 = 3.24e-3
rtherm.rtherm2 6 5 = 8.08e-3
rtherm.rtherm3 5 4 = 2.28e-2
rtherm.rtherm4 4 3 = 1e-1
rtherm.rtherm5 3 2 = 1.1e-1
rtherm.rtherm6 2 tl = 1.4e-1
}
CTHERM4
3
RTHERM5
CTHERM5
2
RTHERM6
CTHERM6
tl
www.onsemi.com
10
CASE
FDB045AN08A0-F085 N-Channel PowerTrench® MOSFET
SPICE Thermal Model
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
❖
© Semiconductor Components Industries, LLC
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
www.onsemi.com