ON Semiconductor
Is Now
To learn more about onsemi™, please visit our website at
www.onsemi.com
onsemi and and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or
subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi
product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without
notice. The information herein is provided “as-is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality,
or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all
liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws,
regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/
or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application
by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized
for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for
implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees,
subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative
Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Other names and brands may be claimed as the property of others.
FDD9410-F085 N-Channel Power Trench® MOSFET
FDD9410-F085
N-Channel Power Trench® MOSFET
40 V, 50 A, 4.1 mΩ
Features
D
Typ rDS(on) = 3.5 mΩ at VGS = 10V, ID = 50 A
G
Typ Qg(tot) = 23.5 nC at VGS = 10V, ID = 50 A
UIS Capability
D
RoHS Compliant
Qualified to AEC Q101
S
Applications
D-PAK
TO-252
(TO-252)
G
S
Automotive Engine Control
Powertrain Management
Solenoid and Motor Drivers
Integrated Starter/alternator
Primary Switch for 12V Systems
MOSFET Maximum Ratings TJ = 25°C unless otherwise noted
Symbol
VDSS
Drain to Source Voltage
VGS
ID
EAS
PD
Parameter
Gate to Source Voltage
Ratings
40
Units
V
±20
V
Drain Current - Continuous (VGS=10) (Note 1)
TC = 25°C
50
Pulsed Drain Current
TC = 25°C
See Figure4
Single Pulse Avalanche Energy
(Note 2)
40
A
mJ
Power Dissipation
75
W
Derate Above 25oC
0.5
W/oC
TJ, TSTG Operating and Storage Temperature
RθJC
Thermal Resistance Junction to Case
RθJA
Maximum Thermal Resistance Junction to Ambient
-55 to + 175
oC
2
oC/W
52
oC/W
(Note 3)
Package Marking and Ordering Information
Device Marking
FDD9410
Device
FDD9410-F085
Package
D-PAK(TO-252)
Reel Size
13”
Tape Width
12mm
Quantity
2500 units
Notes:
1: Current is limited by bondwire configuration.
2: Starting TJ = 25°C, L = 50uH, IAS = 40A, VDD = 40V during inductor charging and VDD = 0V during time in avalanche.
3: RθJA is the sum of the junction-to-case and case-to-ambient thermal resistance where the case thermal reference is defined as the solder
mounting surface of the drain pins. RθJC is guaranteed by design while RθJA is determined by the user's board design. The maximum
rating presented here is based on mounting on a 1 in2 pad of 2oz copper.
©2014 Semiconductor Components Industries, LLC.
August-2017, Rev3
Publication Order Number:
FDD9410-F085/D
Symbol
Parameter
Test Conditions
Min
Typ
Max
Units
Off Characteristics
BVDSS
Drain to Source Breakdown Voltage
IDSS
Drain to Source Leakage Current
IGSS
Gate to Source Leakage Current
ID = 250μA, VGS = 0V
VDS = 40V,
VGS = 0V
40
-
-
V
-
-
1
μA
TJ = 25oC
TJ = 175oC(Note 4)
-
-
1
mA
-
-
±100
nA
2.0
3.0
4.0
V
-
3.5
4.1
mΩ
-
6.1
7.1
mΩ
VGS = ±20V
On Characteristics
VGS(th)
rDS(on)
Gate to Source Threshold Voltage
Drain to Source On Resistance
VGS = VDS, ID = 250μA
ID = 50A,
VGS = 10V
TJ = 25oC
TJ = 175oC(Note 4)
Dynamic Characteristics
Ciss
Input Capacitance
Coss
Output Capacitance
Crss
Reverse Transfer Capacitance
Rg
Gate Resistance
f = 1MHz
Qg(ToT)
Total Gate Charge at 10V
VGS = 0 to 10V
Qg(th)
Threshold Gate Charge
VGS = 0 to 2V
Qgs
Gate to Source Gate Charge
Qgd
Gate to Drain “Miller“ Charge
-
VDS = 25V, VGS = 0V,
f = 1MHz
VDD = 20V
ID = 50A
-
1715
-
pF
-
453
-
pF
-
28
-
pF
-
2.3
-
Ω
-
23.5
34.5
nC
-
3.2
4
nC
-
9.6
-
nC
4.4
-
nC
Switching Characteristics
ton
Turn-On Time
-
-
38
ns
td(on)
Turn-On Delay Time
-
12
-
ns
tr
Rise Time
-
12
-
ns
td(off)
Turn-Off Delay Time
-
20
-
ns
tf
Fall Time
-
9
-
ns
toff
Turn-Off Time
-
-
45
ns
V
VDD = 20V, ID = 50A,
VGS = 10V, RGEN = 6Ω
Drain-Source Diode Characteristics
VSD
Source to Drain Diode Voltage
Trr
Reverse Recovery Time
Qrr
Reverse Recovery Charge
ISD = 50A, VGS = 0V
-
-
1.25
ISD = 25A, VGS = 0V
-
-
1.2
V
IF = 50A, dISD/dt = 100A/μs,
VDD=32V
-
44
58
ns
-
31.5
41
nC
Note:
4: The maximum value is specified by design at TJ = 175°C. Product is not tested to this condition in production.
www.onsemi.com
2
FDD9410-F085 N-Channel Power Trench® MOSFET
Electrical Characteristics TJ = 25°C unless otherwise noted
120
1.0
100
ID, DRAIN CURRENT (A)
POWER DISSIPATION MULTIPLIER
1.2
0.8
0.6
0.4
0.2
0.0
0
25
50
75
100
125
150
TC, CASE TEMPERATURE(oC)
VGS = 10V
CURRENT LIMITED
BY SILICON
80
60
40
20
0
175
Figure 1. Normalized Power Dissipation vs. Case
Temperature
CURRENT LIMITED
BY PACKAGE
25
50
75
100
125
150
TC, CASE TEMPERATURE(oC)
175
Figure 2. Maximum Continuous Drain Current vs.
Case Temperature
NORMALIZED THERMAL
IMPEDANCE, ZθJC
2
DUTY CYCLE - DESCENDING ORDER
1
D = 0.50
0.20
0.10
0.05
0.02
0.01
0.1
PDM
t1
t2
NOTES:
DUTY FACTOR: D = t1/t2
PEAK TJ = PDM x ZθJA x RθJA + TC
SINGLE PULSE
0.01
-5
10
-4
10
-3
-2
-1
0
10
10
10
t, RECTANGULAR PULSE DURATION(s)
1
10
10
Figure 3. Normalized Maximum Transient Thermal Impedance
1000
VGS = 10V
TC = 25oC
IDM, PEAK CURRENT (A)
FOR TEMPERATURES
ABOVE 25oC DERATE PEAK
CURRENT AS FOLLOWS:
175 - TC
I = I2
150
100
SINGLE PULSE
10
-5
10
-4
10
-3
-2
-1
10
10
10
t, RECTANGULAR PULSE DURATION(s)
Figure 4. Peak Current Capability
www.onsemi.com
3.om
3
0
10
1
10
FDD9410-F085 N-Channel Power Trench® MOSFET
Typical Characteristics
200
IAS, AVALANCHE CURRENT (A)
ID, DRAIN CURRENT (A)
1000
100
100us
10
OPERATION IN THIS
AREA MAY BE
LIMITED BY rDS(on)
1
SINGLE PULSE
TJ = MAX RATED
TC = 25oC
0.1
1
1ms
10ms
100ms
10
VDS, DRAIN TO SOURCE VOLTAGE (V)
PULSE DURATION = 80μs
DUTY CYCLE = 0.5% MAX
120
VDD = 5V
90
TJ = 175oC
60
TJ = 25oC
TJ = -55oC
30
0
3
4
5
6
VGS, GATE TO SOURCE VOLTAGE (V)
STARTING TJ = 150oC
0.01
0.1
1
10
100
tAV, TIME IN AVALANCHE (ms)
NOTE: Refer to On Semiconductor Application Notes AN7514 and
AN7515
Figure 6. Unclamped Inductive Switching
Capability
IS, REVERSE DRAIN CURRENT (A)
ID, DRAIN CURRENT (A)
150
STARTING TJ = 25oC
10
1
0.001
100
Figure 5. Forward Bias Safe Operating Area
200
100
VGS = 0 V
10
TJ = 175 oC
TJ = 25 oC
1
0.1
0.01
0.0
7
0.2
0.4
0.6
0.8
1.0
1.2
VSD, BODY DIODE FORWARD VOLTAGE (V)
Figure 7. Transfer Characteristics
Figure 8. Forward Diode Characteristics
150
150
80μs PULSE WIDTH
Tj=25oC
120
90
60
ID, DRAIN CURRENT (A)
ID, DRAIN CURRENT (A)
If R = 0
tAV = (L)(IAS)/(1.3*RATED BVDSS - VDD)
If R ≠ 0
tAV = (L/R)ln[(IAS*R)/(1.3*RATED BVDSS - VDD) +1]
100
VGS
15V Top
10V
8V
7V
6V
5.5V
5V Bottom
30
80μs PULSE WIDTH
Tj=175oC
120
90
60
VGS
15V5.5V
Top
10V
8V
7V
6V
5.5V
5V Bottom
5V
30
5V
0
0
1
2
3
4
VDS, DRAIN TO SOURCE VOLTAGE (V)
Figure 9. Saturation Characteristics
5
0
0
1
2
3
4
VDS, DRAIN TO SOURCE VOLTAGE (V)
Figure 10. Saturation Characteristics
www.onsemi.com
4
5
FDD9410-F085 N-Channel Power Trench® MOSFET
Typical Characteristics
rDS(on), DRAIN TO SOURCE
ON-RESISTANCE (mΩ)
ID = 50A
PULSE DURATION = 80μs
DUTY CYCLE = 0.5% MAX
40
30
TJ = 175oC
TJ = 25oC
20
10
0
4
5
6
7
8
9
VGS, GATE TO SOURCE VOLTAGE (V)
10
Figure 11. RDSON vs. Gate Voltage
NORMALIZED
DRAIN TO SOURCE ON-RESISTANCE
50
1.6
1.4
1.2
1.0
ID = 50A
VGS = 10V
0.8
0.6
-80
-40
0
40
80
120
160
TJ, JUNCTION TEMPERATURE(oC)
200
1.10
1.1
ID = 1mA
NORMALIZED DRAIN TO SOURCE
BREAKDOWN VOLTAGE
VGS = VDS
ID = 250μA
1.05
1.0
0.9
1.00
0.8
0.95
0.7
0.6
-80
-40
0
40
80
120
160
TJ, JUNCTION TEMPERATURE(oC)
Figure 13. Normalized Gate Threshold Voltage vs.
Temperature
10000
Ciss
1000
Coss
100
f = 1MHz
VGS = 0V
10
0.1
0.90
-80
200
Crss
1
10
VDS, DRAIN TO SOURCE VOLTAGE (V)
100
Figure 15. Capacitance vs. Drain to Source
Voltage
-40
0
40
80
120
160
TJ, JUNCTION TEMPERATURE (oC)
200
Figure 14. Normalized Drain to Source
Breakdown Voltage vs. Junction Temperature
VGS, GATE TO SOURCE VOLTAGE(V)
NORMALIZED GATE
THRESHOLD VOLTAGE
PULSE DURATION = 80μs
DUTY CYCLE = 0.5% MAX
Figure 12. Normalized RDSON vs. Junction
Temperature
1.2
CAPACITANCE (pF)
1.8
10
ID = 50A
VDD = 16V
8
VDD = 24V
6
VDD = 20V
4
2
0
0
5
10
15
20
Qg, GATE CHARGE(nC)
25
Figure 16. Gate Charge vs. Gate to Source
Voltage
www.onsemi.com
5
FDD9410-F085 N-Channel Power Trench® MOSFET
Typical Characteristics
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
❖
© Semiconductor Components Industries, LLC
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
www.onsemi.com