Is Now Part of
To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
FDMS86104
N-Channel Shielded Gate PowerTrench® MOSFET
100 V, 16 A, 24 mΩ
Features
Shielded Gate MOSFET Technology
General Description
Max rDS(on) = 24 mΩ at VGS = 10 V, ID = 7 A
This N-Channel MOSFET is produced using Fairchild
Semiconductor‘s advanced PowerTrench® process that
incorporates Shielded Gate technology. This process has been
optimized for the on-state resistance and yet maintain superior
switching performance.
Max rDS(on) = 39 mΩ at VGS = 6 V, ID = 5.5 A
Advanced Package and Silicon combination for low rDS(on)
and high efficiency
MSL1 robust package design
Application
100% UIL tested
DC-DC Conversion
RoHS Compliant
Bottom
Top
Pin 1
S
D
D
D
S
S
G
S
D
S
D
S
D
G
D
D
Power 56
MOSFET Maximum Ratings TA = 25 °C unless otherwise noted
Symbol
VDS
Drain to Source Voltage
Parameter
VGS
Gate to Source Voltage
Drain Current -Continuous
TC = 25 °C
-Continuous
TA = 25 °C
ID
TJ, TSTG
±20
V
(Note 1a)
7
A
30
Single Pulse Avalanche Energy
PD
Units
V
16
-Pulsed
EAS
Ratings
100
(Note 3)
Power Dissipation
TC = 25 °C
Power Dissipation
TA = 25 °C
96
73
(Note 1a)
Operating and Storage Junction Temperature Range
2.5
-55 to +150
mJ
W
°C
Thermal Characteristics
RθJC
Thermal Resistance, Junction to Case
RθJA
Thermal Resistance, Junction to Ambient
1.7
(Note 1a)
50
°C/W
Package Marking and Ordering Information
Device Marking
FDMS86104
Device
FDMS86104
©2012 Fairchild Semiconductor Corporation
FDMS86104 Rev. C3
Package
Power 56
1
Reel Size
13 ’’
Tape Width
12 mm
Quantity
3000 units
www.fairchildsemi.com
FDMS86104 N-Channel Shielded Gate PowerTrench® MOSFET
October 2014
Symbol
Parameter
Test Conditions
Min
Typ
Max
Units
Off Characteristics
BVDSS
Drain to Source Breakdown Voltage
ID = 250 μA, VGS = 0 V
ΔBVDSS
ΔTJ
Breakdown Voltage Temperature
Coefficient
ID = 250 μA, referenced to 25 °C
IDSS
Zero Gate Voltage Drain Current
VDS = 80 V, VGS = 0 V
1
μA
IGSS
Gate to Source Leakage Current
VGS = ±20 V, VDS = 0 V
±100
nA
4
V
100
V
66
mV/°C
On Characteristics
VGS(th)
Gate to Source Threshold Voltage
VGS = VDS, ID = 250 μA
ΔVGS(th)
ΔTJ
Gate to Source Threshold Voltage
Temperature Coefficient
ID = 250 μA, referenced to 25 °C
-10
VGS = 10 V, ID = 7 A
20
rDS(on)
Static Drain to Source On Resistance
VGS = 6 V, ID = 5.5 A
27
39
VGS = 10 V, ID = 7 A, TJ = 125 °C
33
40
VDS = 10 V, ID = 7 A
18
gFS
Forward Transconductance
2
2.9
mV/°C
24
mΩ
S
Dynamic Characteristics
Ciss
Input Capacitance
Coss
Output Capacitance
Crss
Reverse Transfer Capacitance
Rg
Gate Resistance
VDS = 50 V, VGS = 0 V,
f = 1 MHz
694
923
pF
178
237
pF
8
13
pF
Ω
0.5
Switching Characteristics
8
16
VDD = 50 V, ID = 7 A,
VGS = 10 V, RGEN = 6 Ω
3.5
10
ns
14.3
26
ns
3.2
10
ns
Total Gate Charge
VGS = 0 V to 10 V
11.7
16
nC
Qg
Total Gate Charge
VGS = 0 V to 5 V
6.7
9
Qgs
Gate to Source Charge
Qgd
Gate to Drain “Miller” Charge
td(on)
Turn-On Delay Time
tr
Rise Time
td(off)
Turn-Off Delay Time
tf
Fall Time
Qg
VDD = 50 V,
ID = 7 A
ns
3.2
nC
3
nC
Drain-Source Diode Characteristics
VSD
Source to Drain Diode Forward Voltage
trr
Reverse Recovery Time
Qrr
Reverse Recovery Charge
VGS = 0 V, IS = 2 A
(Note 2)
0.7
1.2
VGS = 0 V, IS = 7 A
(Note 2)
0.8
1.3
IF = 7 A, di/dt = 100 A/μs
V
44
70
ns
41
65
nC
Notes:
1. RθJA is determined with the device mounted on a 1in2 pad 2 oz copper pad on a 1.5 x 1.5 in. board of FR-4 material. RθJC is guaranteed by design while RθCA is determined by
the user's board design.
a. 50 °C/W when mounted on a
1 in2 pad of 2 oz copper.
b. 125 °C/W when mounted on a
minimum pad of 2 oz copper.
SS
SF
DS
DF
G
SS
SF
DS
DF
G
2. Pulse Test: Pulse Width < 300 μs, Duty cycle < 2.0%.
3. Starting TJ = 25 °C, L = 3 mH, IAS = 8 A, VDD = 100 V, VGS = 10 V
©2012 Fairchild Semiconductor Corporation
FDMS86104 Rev. C3
2
www.fairchildsemi.com
FDMS86104 N-Channel Shielded Gate PowerTrench® MOSFET
Electrical Characteristics TJ = 25 °C unless otherwise noted
5
NORMALIZED
DRAIN TO SOURCE ON-RESISTANCE
ID, DRAIN CURRENT (A)
30
PULSE DURATION = 80 μs
DUTY CYCLE = 0.5% MAX
VGS = 10 V
24
VGS = 8 V
18
VGS = 6.5 V
12
VGS = 5 V
6
VGS = 4.5 V
0
0
1
2
3
4
4
VGS = 4.5 V
VGS = 5 V
3
VGS = 8 V
2
VGS = 6.5 V
1
0
5
0
6
Figure 1. On-Region Characteristics
18
24
rDS(on), DRAIN TO
1.6
1.4
1.2
1.0
0.8
0.6
-75
-50
SOURCE ON-RESISTANCE (mΩ)
0.20
ID = 7 A
VGS = 10 V
1.8
ID = 7 A
0.15
0.10
TJ = 125 oC
0.05
TJ = 25 oC
0.00
4
-25
0
25 50 75 100 125 150
TJ, JUNCTION TEMPERATURE (oC)
PULSE DURATION = 80 μs
DUTY CYCLE = 0.5% MAX
5
6
7
8
9
Figure 4. On-Resistance vs Gate to
Source Voltage
30
40
IS, REVERSE DRAIN CURRENT (A)
PULSE DURATION = 80 μs
DUTY CYCLE = 0.5% MAX
24
VDS = 5 V
18
TJ = 150 oC
12
TJ = 25 oC
6
TJ = -55 oC
2
3
4
5
VGS = 0 V
10
TJ = 150 oC
1
TJ = -55 oC
0.01
0.001
0.0
6
TJ = 25 oC
0.1
0.2
0.4
0.6
0.8
1.0
VGS, GATE TO SOURCE VOLTAGE (V)
VSD, BODY DIODE FORWARD VOLTAGE (V)
Figure 5. Transfer Characteristics
Figure 6. Source to Drain Diode
Forward Voltage vs Source Current
©2012 Fairchild Semiconductor Corporation
FDMS86104 Rev. C3
10
VGS, GATE TO SOURCE VOLTAGE (V)
Figure 3. Normalized On- Resistance
vs Junction Temperature
0
30
Figure 2. Normalized On-Resistance
vs Drain Current and Gate Voltage
2.0
NORMALIZED
DRAIN TO SOURCE ON-RESISTANCE
12
ID, DRAIN CURRENT (A)
VDS, DRAIN TO SOURCE VOLTAGE (V)
ID, DRAIN CURRENT (A)
VGS = 10 V
PULSE DURATION = 80 μs
DUTY CYCLE = 0.5% MAX
3
1.2
www.fairchildsemi.com
FDMS86104 N-Channel Shielded Gate PowerTrench® MOSFET
Typical Characteristics TJ = 25 °C unless otherwise noted
2000
ID = 7 A
1000
VDD = 25 V
Ciss
8
CAPACITANCE (pF)
VGS, GATE TO SOURCE VOLTAGE (V)
10
VDD = 50 V
6
VDD = 75 V
4
Coss
100
10
0
Crss
f = 1 MHz
VGS = 0 V
2
0
3
6
9
12
1
0.1
15
1
10
100
VDS, DRAIN TO SOURCE VOLTAGE (V)
Qg, GATE CHARGE (nC)
Figure 7. Gate Charge Characteristics
Figure 8. Capacitance vs Drain
to Source Voltage
8
20
ID, DRAIN CURRENT (A)
IAS, AVALANCHE CURRENT (A)
o
RθJA = 50 C/W
10
TJ = 25 oC
TJ = 100 oC
TJ = 125 oC
1
0.01
0.1
1
10
6
VGS = 10 V
4
VGS = 6 V
2
0
25
30
50
100
125
150
o
Figure 9. Unclamped Inductive
Switching Capability
Figure 10. Maximum Continuous Drain
Current vs Ambient Temperature
4000
P(PK), PEAK TRANSIENT POWER (W)
50
100 us
ID, DRAIN CURRENT (A)
75
TA, Ambient TEMPERATURE ( C)
tAV, TIME IN AVALANCHE (ms)
10
1 ms
1
10 ms
THIS AREA IS
LIMITED BY rDS(on)
0.1
0.01
0.005
0.05 0.1
100 ms
SINGLE PULSE
TJ = MAX RATED
1s
RθJA = 125 oC/W
10 s
o
TA = 25 C
1
DC
10
100
400
TA = 25 oC
100
10
1
0.5 -4
10
-3
10
-2
10
-1
10
1
100
10
1000
t, PULSE WIDTH (sec)
VDS, DRAIN to SOURCE VOLTAGE (V)
Figure 11. Forward Bias Safe
Operating Area
©2012 Fairchild Semiconductor Corporation
FDMS86104 Rev. C3
SINGLE PULSE
RθJA = 125 oC/W
1000
Figure 12. Single Pulse Maximum
Power Dissipation
4
www.fairchildsemi.com
FDMS86104 N-Channel Shielded Gate PowerTrench® MOSFET
Typical Characteristics TJ = 25 °C unless otherwise noted
NORMALIZED THERMAL
IMPEDANCE, ZθJA
2
1
0.1
0.01
DUTY CYCLE-DESCENDING ORDER
D = 0.5
0.2
0.1
0.05
0.02
0.01
PDM
t1
t2
SINGLE PULSE
0.001
NOTES:
DUTY FACTOR: D = t1/t2
PEAK TJ = PDM x ZθJA x RθJA + TA
o
RθJA = 125 C/W
0.0001 -4
10
-3
10
-2
10
-1
10
1
10
100
1000
t, RECTANGULAR PULSE DURATION (sec)
Figure 13. Junction-to-Ambient Transient Thermal Response Curve
POWER DISSIPATION (W)
100
80
60
40
20
0
0
25
50
75
100
125
150
175
TC, CASE TEMPERATURE (oC)
Figure 14. Power Vs Case Temperature
©2012 Fairchild Semiconductor Corporation
FDMS86104 Rev. C3
5
www.fairchildsemi.com
FDMS86104 N-Channel Shielded Gate PowerTrench® MOSFET
Typical Characteristics TJ = 25 °C unless otherwise noted
PQFN8 5X6, 1.27P
CASE 483AE
ISSUE A
5.10
PKG
CL
8
5.10
3.91
A
SEE
DETAIL B
B
5
1.27
8
7
6
5
0.77
4.52
PKG CL
5.85
5.65
6.15
3.75
6.61
KEEP OUT
AREA
1.27
1
4
1
TOP VIEW
2
3
4
0.61
1.27
3.81
OPTIONAL DRAFT
ANGLE MAY APPEAR
ON FOUR SIDES
OF THE PACKAGE
SEE
DETAIL C
5.00
4.80
LAND PATTERN
RECOMMENDATION
0.35
0.15
0.10 C
0.05
0.00
SIDE VIEW
8X
0.08 C
5.20
4.80
1.10
0.90
3.81
0.35
0.15
DETAIL C
SCALE: 2:1
1.27
0.51 (8X)
0.31
(0.34)
0.10
1
2
3
C A B
4
0.76
0.51
(0.52)
6.25
5.90
3.48+0.30
-0.10
(0.50)
(0.30)
(2X)
8
0.20+0.10
-0.15 (8X)
7
6
3.96
3.61
BOTTOM VIEW
0.30
0.05
5
C
SEATING
PLANE
DETAIL B
SCALE: 2:1
NOTES: UNLESS OTHERWISE SPECIFIED
A. PACKAGE STANDARD REFERENCE: JEDEC MO-240,
ISSUE A, VAR. AA,.
B. DIMENSIONS DO NOT INCLUDE BURRS OR MOLD FLASH.
MOLD FLASH OR BURRS DOES NOT EXCEED 0.10MM.
C. ALL DIMENSIONS ARE IN MILLIMETERS.
D. DIMENSIONING AND TOLERANCING PER ASME Y14.5M-2009.
E. IT IS RECOMMENDED TO HAVE NO TRACES OR
VIAS WITHIN THE KEEP OUT AREA.
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
© Semiconductor Components Industries, LLC
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
1
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
www.onsemi.com