Ultrafast Rectifiers,
Surface Mount,
6 A, 200 V - 600 V
FES6, NRVFES6 Series
Features
•
•
•
•
•
•
•
•
•
•
www.onsemi.com
Very Low Profile: Typical Height of 1.1 mm
Ultrafast Recovery Time
Low Forward Voltage Drop
Low Thermal Resistance
Very Stable Operation at Industrial Temperature, 150°C
RoHS Compliant
Green Molding Compound as per IEC61249 Standard
Lead Free in Compliance with EU RoHS 2011/65/EU Directive
With DAP Option Only
NRV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q101
Qualified and PPAP Capable
3
2
1
TO−277−3LD
CASE 340BQ
Anode 1
3
Cathode
Anode 2
MAXIMUM RATINGS
Parameter
Symbol
Repetitive Peak Reverse Voltage
Value
Unit
VRRM
FES6D
FES6G
FES6J
V
Average Forward Rectified Current
IF(AV)
6
A
Peak Forward Surge Current: 8.3 ms
Single Half Sine−Wave Superimposed
on Rated Load
IFSM
80
A
Operating Junction Temperature Range
TJ
−55 to
+175
°C
TSTG
−55 to
+175
°C
Storage Temperature Range
MARKING DIAGRAM
200
400
600
$Y&Z&3
*
$Y
&Z
&3
*
= ON Semiconductor Logo
= Assembly Plant Code
= Date Code (Year & Week)
= Specific Device Code
FES6D, FES6G, FES6J
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
ORDERING INFORMATION
Part Number
Package
Shipping†
TO−277 3L (with DAP Option only)
5000 / Tape & Reel
Top Mark
FES6D
NRVFES6D*
FES6D
FES6G
NRVFES6G*
FES6G
FES6J
NRVFES6J*
FES6J
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*NRV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP
Capable.
© Semiconductor Components Industries, LLC, 2020
April, 2020 − Rev. 4
1
Publication Order Number:
FES6D/D
FES6, NRVFES6 Series
THERMAL CHARACTERISTICS (Values are at TA = 25°C unless otherwise noted) (Note 1)
Symbol
Value
Unit
Thermal Characteristics, Junction−to−Lead, Thermocouple Soldered to Cathode
Parameter
YJL
6
°C/W
Thermal Resistance, Junction−to−Ambient
RqJA
100
°C/W
1. Per JESD51−3 Recommended Thermal Test Board.
ELECTRICAL CHARACTERISTICS (Values are at TA = 25°C unless otherwise noted)
Value
Symbol
Parameter
Conditions
FES6D
FES6G
FES6J
Unit
VF
Maximum Instantaneous Forward
Voltage (Note 2)
IF = 6 A
1.05
1.20
2.2
V
IF = 6 A, TJ = 125°C
0.90
1.00
1.80
IR
Maximum Reverse Current
at Rated VR
TJ = 25°C
TJ = 125°C
mA
2
200
500
CJ
Typical Junction Capacitance
VR = 4 V, f = 1 MHz
60
45
Trr
Typical Reverse Recovery Time
IF = 0.5 A, IR = 1 A, IRR = 0.25 A
25
IF = 1 A, di/dt = 50 A/ms, VR = 30 V
45
pF
ns
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
2. Pulse test with PW = 300 ms, 1% duty cycle
www.onsemi.com
2
FES6, NRVFES6 Series
TYPICAL CHARACTERISTICS
10
10
FES6G
IF − FORWARD CURRENT (A)
IF − FORWARD CURRENT (A)
FES6D
1
o
TA = −55 C
0.1
o
TA = 25 C
o
TA = 75 C
0.01
o
TA = 125 C
1
o
TA = −55 C
o
0.1
TA = 25 C
o
TA = 75 C
0.01
o
TA = 125 C
o
TA = 150 C
o
TA = 150 C
0.001
0.0
0.2
0.4
0.6
0.8
1.0
0.001
0.0
1.2
0.2
VF − FORWARD VOLTAGE (V)
0.6
1.0
1.2
1.4
100
10
IR − LEAKAGE CURRENT (μA)
FES6J
1
o
TA = −55 C
0.1
o
TA = 25 C
o
TA = 75 C
0.01
o
TA = 125 C
o
TA = 150 C
o
TA = 125 C
1
0.1
0.01
0.001
0.5
1.0
o
o
TA = −55 C
TA = 25 C
TA = 150 C
1E−4
0.001
0.0
FES6D
o
TA = 75 C
10
o
1.5
2.0
0
2.5
50
100
150
200
VR − REVERSE VOLTAGE (V)
VF − FORWARD VOLTAGE (V)
Fig 4. Typical Reverse Characteristics for FES6D
Fig 3. Typical Forward Characteristics for FES6J
100
100
o
TA = 150 C
FES6G
o
TA = 125 C
IR − LEAKAGE CURRENT (μA)
IR − LEAKAGE CURRENT (μA)
0.8
Fig 2. Typical Forward Characteristics for FES6G
Fig 1. Typical Forward Characteristics for FES6D
IF − FORWARD CURRENT (A)
0.4
VF − FORWARD VOLTAGE (V)
10
1
o
TA = 75 C
0.1
0.01
o
TA = 150 C
FES6J
o
TA = 125 C
10
1
o
TA = 75 C
0.1
0.01
o
o
TA = −55 C
TA = 25 C
o
TA = 25 C
0.001
0
50
100 150 200 250 300 350
400 450 500 550 600
o
TA = −55 C
0.001
0
VR − REVERSE VOLTAGE (V)
50
100
150 200 250 300 350 400 450 500 550 600
VR − REVERSE VOLTAGE (V)
Fig 5. Typical Reverse Characteristics for FES6G
Fig 6. Typical Reverse Characteristics for FES6J
www.onsemi.com
3
FES6, NRVFES6 Series
TYPICAL CHARACTERISTICS
1000
7
CJ − JUNCTION CAPACITANCE (pF)
IF − AVERAGE FORWARD CURRENT (A)
8
TL (Cathode)
6
5
4
3
2
TA
1
25
50
75
100
125
150
100
FESD6J
10
FESD6D & FESD6G
1
0.1
0
0
f=1MHz
175
1
o
10
VR − REVERSE BIAS VOLTAGE (V)
TEMPERATURE ( C)
Fig 8. Typical Junction Capacitance
Fig 7. Forward Current Derating Curve
www.onsemi.com
4
100
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
TO−277−3LD
CASE 340BQ
ISSUE O
DOCUMENT NUMBER:
DESCRIPTION:
98AON13861G
TO−277−3LD
DATE 30 SEP 2016
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
onsemi,
, and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates
and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property.
A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any
products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the
information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use
of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products
and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information
provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may
vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license
under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems
or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should
Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
onsemi Website: www.onsemi.com
◊
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative