ON Semiconductor
Is Now
To learn more about onsemi™, please visit our website at
www.onsemi.com
onsemi and and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or
subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi
product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without
notice. The information herein is provided “as-is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality,
or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all
liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws,
regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/
or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application
by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized
for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for
implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees,
subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative
Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Other names and brands may be claimed as the property of others.
Description
This complementary device is a medium-power amplifier
and switch, requiring collector currents up to 500 mA.
Sourced from Process 19 and 63. See FFB2222A (NPN)
and FFB2907A (PNP) for characteristics.
Ordering Information
Part Number
Top Mark
Package
Packing Method
FFB2227A
AA
SC70 6L
Tape and Reel
FMB2227A
001
SSOT 6L
Tape and Reel
Block Diagram
C2
E2
E1
B2
C1
C1
SuperSOTTM-6
SC70-6
B2
C2
B1
Mark: .AA
Dot denotes pin#1
E2
Pin#1 E1
pin#1 B1
FFB2227A Device Package
C1
B2
Mark: .001
Dot denotes pin#1
FMB2227A Device Package
E2
C1
E1
C2
B1
E2
B2
TRANSISTOR TYPE
E1
B1
C1 B1 E1
NPN
C2 B2 E2
PNP
C2
FMB2227A Internal Connection
FFB2227A Internal Connection
Figure 1. Block Diagram
© 1998 Semiconductor Components Industries, LLC.
November-2017, Rev. 2
1
Publication Order Number:
FFB2227A/D
FFB2227A / FMB2227A — NPN & PNP General-Purpose Amplifier
FFB2227A / FMB2227A
NPN & PNP General-Purpose Amplifier
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The
absolute maximum ratings are stress ratings only. Values are at TA = 25°C unless otherwise noted.
Symbol
Parameter
Value
Units
VCEO
Collector-Emitter Voltage
30
V
VCBO
Collector-Base Voltage
60
V
VEBO
Emitter-Base Voltage
5
V
500
mA
- 55 to +150
°C
IC
TJ, TSTG
Collector Current - Continuous
Operating and Storage Junction Temperature Range
Notes:
1. These ratings are based on a maximum junction temperature of 150°C.
2. These are steady-state limits. ON Semiconductor should be consulted on applications involving pulsed or lowduty cycle operations.
3. All voltages (V) and currents (A) are negative polarity for PNP transistors.
4. These Ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
Thermal Characteristics(2)
Values are at TA = 25°C unless otherwise noted.
Symbol
PD
RθJA
Maximum
Parameter
Units
FFB2227A
FMB2227A
Total Device Dissipation
300
700
mV
Derate Above 25°C
2.4
5.6
mV/°C
Thermal Resistance, Junction to Ambient
415
180
°C/W
Note:
2. PCB board size: FR-4 76 x 114 x 0.6T mm3(3.0 inch x 4.5 inch x 0.062 inch) with minimum land pattern size.
www.onsemi.com
2
FFB2227A / FMB2227A — NPN & PNP General-Purpose Amplifier
Absolute Maximum Ratings(1)
Values are at TA = 25°C unless otherwise noted.
Symbol
Parameter
Test Conditions
Min.
Typ.
Max.
Units
OFF CHARACTERISTICS
V(BR)CEO
Collector-Emitter Breakdown
Voltage(4)
IC = 10 mA, IB = 0
30
V
V(BR)CBO
Collector-Base Breakdown
Voltage
IC = 10 μA, IE = 0
60
V
V(BR)EBO
Emitter-Base Breakdown Voltage
IE = 10 μA, IC = 0
5
V
ICBO
Collector Cut-Off Current
VCB = 50 V, IE = 0
30
nA
IEBO
Emitter Cut-Off Current
VEB = 3.0 V, IC = 0
30
nA
IC = 150 mA, IB = 15 mA
0.4
V
IC = 300 mA, IB = 30 mA
1.4
V
IC = 150 mA, IB = 15 mA
1.3
V
ON CHARACTERISTICS
hFE
DC Current Gain
VCE(sat)
Collector-Emitter Saturation
Voltage(4)
VBE(sat)
Base-Emitter Saturation
Voltage(4)
IC = 1.0 mA, VCE = 10 V
50
IC = 10 mA, VCE = 10 V
75
IC = 150 mA, VCE = 10
V(4)
100
IC = 300 mA, VCE = 10
V(4)
30
SMALL SIGNAL CHARACTERISTICS
Current Gain - Bandwidth Product
IC = 50 mA, VCE = 20 V,
f = 100 MHz
250
MHz
Cobo
Output Capacitance
VCB = 10 V, IE = 0, f = 100 kHz
4.0
pF
Cibo
Input Capacitance
VEB = 2.0 V, IC = 0, f = 100 kHz
12
pF
NF
Noise Figure
IC = 100 μA, VCE = 10 V,
RS = 1.0 kΩ, f = 1.0 kHz
2.0
dB
30
ns
8.0
ns
20
ns
80
ns
60
ns
20
ns
fT
SWITCHING CHARACTERISTICS
ton
Turn-on Time
td
Delay Time
tr
Rise Time
toff
Turn-off Time
ts
Storage Time
tf
Fall Time
VCC = 30 V, IC = 150 mA,
IB1 = 15 mA
VCC = 6.0 V, IC = 150 mA,
IB1 = IB2 = 15 mA
Notes:
3. All voltages (V) and currents (A) are negative polarity for PNP transistors.
4. Pulse test: pulse width ≤ 300 μs, duty cycle ≤ 2.0%.
www.onsemi.com
3
FFB2227A / FMB2227A — NPN & PNP General-Purpose Amplifier
Electrical Characteristics(3)
SC70 6L
SYMM
C
L
2.00±0.20
0.65
A
0.50 MIN
6
4
B
PIN ONE
1.25±0.10
1
1.90
3
0.30
0.15
(0.25)
0.40 MIN
0.10
0.65
A B
1.30
LAND PATTERN RECOMMENDATION
1.30
1.00
0.80
SEE DETAIL A
1.10
0.80
0.10 C
0.10
0.00
C
2.10±0.30
SEATING
PLANE
NOTES: UNLESS OTHERWISE SPECIFIED
GAGE
PLANE
(R0.10)
0.25
0.10
0.20
A) THIS PACKAGE CONFORMS TO EIAJ
SC-88, 1996.
B) ALL DIMENSIONS ARE IN MILLIMETERS.
C) DIMENSIONS DO NOT INCLUDE BURRS
OR MOLD FLASH.
D) DRAWING FILENAME: MKT-MAA06AREV6
30°
0°
0.46
0.26
SCALE: 60X
Figure 2. 6-LEAD, SC70, EIAJ SC-88, 1.25 MM WIDE (ACTIVE)
Package drawings are provided as a service to customers considering ON Semiconductor components. Drawings may change in
any manner without notice. Please note the revision and/or date on the drawing and contact a ON Semiconductor representative to
verify or obtain the most recent revision. Package specifications do not expand the terms of ON Semiconductor’s worldwide terms and
conditions, specifically the warranty therein, which covers ON Semiconductor products.
www.onsemi.com
4
FFB2227A / FMB2227A — NPN & PNP General-Purpose Amplifier
Physical Dimensions
SSOT 6L
Figure 3. 6-LEAD, SUPER SOT-6, JEDEC MO-193, 1.6 MM WIDE (ACTIVE)
Package drawings are provided as a service to customers considering ON Semiconductor components. Drawings may change in
any manner without notice. Please note the revision and/or date on the drawing and contact a ON Semiconductor representative to
verify or obtain the most recent revision. Package specifications do not expand the terms of ON Semiconductor’s worldwide terms and
conditions, specifically the warranty therein, which covers ON Semiconductor products.
www.onsemi.com
5
FFB2227A / FMB2227A — NPN & PNP General-Purpose Amplifier
Physical Dimensions (Continued)
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
❖
© Semiconductor Components Industries, LLC
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
www.onsemi.com
