FGD3325G2-F085

ON Semiconductor Is Now To learn more about onsemi™, please visit our website at www.onsemi.com onsemi and       and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as-is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Other names and brands may be claimed as the property of others. EcoSPARK®2 330mJ, 250V, N-Channel Ignition IGBT Features Applications o „ SCIS Energy = 330mJ at TJ = 25 C „ Automotive lgnition Coil Driver Circuits „ Logic Level Gate Drive „ Coil On Plug Applications „ Qualified to AEC Q101 „ RoHS Compliant Package GATE EMITTER COLLECTOR JEDEC TO-252 D-Pak @2015 Semiconductor Components Industries, LLC. August-2017, Rev. 2 Publication Order Number: FGD3325G2-F085/D FGD3325G2-F085 EcoSPARK®2 330mJ, 250V, N-Channel Ignition IGBT FGD3325G2-F085 Symbol Parameter BVCER Collector to Emitter Breakdown Voltage (IC = 1mA) Ratings 250 Units V BVECS Emitter to Collector Voltage - Reverse Battery Condition (IC = 10mA) 28 V ESCIS25 ISCIS = 14.8A, L = 3.0mHy, RGE = 1KΩ TC = 25°C 330 mJ TC = 150°C 195 mJ ESCIS150 ISCIS = 11.4A, L = 3.0mHy, RGE = 1KΩ IC25 Collector Current Continuous, at VGE = 5.0V, TC = 25°C 41 A IC110 Collector Current Continuous, at VGE = 5.0V, TC = 110°C 25 A VGEM Gate to Emitter Voltage Continuous PD Power Dissipation Total, at TC = 25°C Power Dissipation Derating, for TC > 25oC ±10 V TC = 25°C 150 W TC > 25°C 1.0 W/oC TJ Operating Junction Temperature Range -55 to +175 o C TSTG Storage Junction Temperature Range -55 to +175 o C TL Max. Lead Temp. for Soldering (Leads at 1.6mm from case for 10s) 300 o C TPKG Reflow soldering according to JESD020C 260 o C ESD HBM-Electrostatic Discharge Voltage at100pF, 1500Ω 4 kV CDM-Electrostatic Discharge Voltage at 1Ω 2 kV Package Marking and Ordering Information Device Marking FGD3325G2 Device FGD3325G2-F085 Package TO252 Reel Size 330mm Tape Width 16mm Quantity 2500 units Electrical Characteristics TA = 25°C unless otherwise noted Symbol Parameter Test Conditions Min Typ Max Units Off State Characteristics BVCER ICE = 2mA, VGE = 0, Collector to Emitter Breakdown Voltage RGE = 1KΩ, TJ = -40 to 150oC 225 - 275 V BVCES ICE = 10mA, VGE = 0V, Collector to Emitter Breakdown Voltage RGE = 0, TJ = -40 to 150oC 240 - 290 V BVECS Emitter to Collector Breakdown Voltage ICE = -75mA, VGE = 0V, TJ = 25°C 28 - - V BVGES Gate to Emitter Breakdown Voltage IGES = ±2mA ±12 ±14 - V Collector to Emitter Leakage Current VCE = 175V, RGE = 1KΩ - - 25 μA - - 1 mA IECS Emitter to Collector Leakage Current VEC = 24V, - - 1 - - 40 R1 Series Gate Resistance - 120 - Ω R2 Gate to Emitter Resistance 10K - 30K Ω ICER TJ = 25oC TJ = 150oC TJ = 25oC TJ = 150oC mA On State Characteristics VCE(SAT) Collector to Emitter Saturation Voltage ICE = 6A, VGE = 4V, VCE(SAT) Collector to Emitter Saturation Voltage ICE = 10A, VGE = 4.5V, VCE(SAT) Collector to Emitter Saturation Voltage ICE = 15A, VGE = 4.5V, www.onsemi.com 2 TJ = 25oC TJ = 150oC TJ = 150oC - 1.15 1.25 V - 1.35 1.50 V - 1.68 1.85 V FGD3325G2-F085 EcoSPARK®2 330mJ, 250V, N-Channel Ignition IGBT Absolute Maximum Ratings TA = 25°C unless otherwise noted Symbol Parameter Test Conditions Min Typ - 21 Max Units Dynamic Characteristics QG(ON) Gate Charge ICE = 10A, VCE = 12V, VGE = 5V - nC 1.3 1.5 2.2 0.75 1.1 1.8 VCE = 12V, ICE = 10A - 2.7 - V Current Turn-On Delay Time-Resistive VCE = 14V, RL = 1Ω VGE = 5V, RG = 1KΩ Current Rise Time-Resistive TJ = 25oC, - 0.8 4 μs - 1.2 7 μs - 5.1 15 μs - 2.2 15 μs - - 1 oC/W VGE(TH) Gate to Emitter Threshold Voltage ICE = 1mA, VCE = VGE, VGEP Gate to Emitter Plateau Voltage TJ = 25oC TJ = 150oC V Switching Characteristics td(ON)R trR td(OFF)L tfL Current Turn-Off Delay Time-Inductive VCE = 190V, L = 1mH, VGE = 5V, RG = 1KΩ Current Fall Time-Inductive ICE = 6.5A, TJ = 25oC, Thermal Characteristics RθJC Thermal Resistance Junction to Case www.onsemi.com 3 FGD3325G2-F085 EcoSPARK®2 330mJ, 250V, N-Channel Ignition IGBT Electrical Characteristics TA = 25°C unless otherwise noted ISCIS, INDUCTIVE SWITCHING CURRENT (A) ISCIS, INDUCTIVE SWITCHING CURRENT (A) 100 SCIS Curves valid for Vclamp Voltages of