Is Now Part of
To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
FMS6346E
Six-Channel, Selectable SD / HD Video Filter Driver
with Disable
Features
Description
AC- or DC-Coupled Inputs
FMS6346E VoltagePlus™ video filter is intended to
replace passive LC filters and drivers with a costeffective integrated device. Six Butterworth filters
improve image quality compared to typical passive
solutions. The combination of low-power StandardDefinition (SD) and High-Definition (HD) filters greatly
simplifies DVD video output circuitry. Three channels
offer fixed SD 6th-order filters, while the other three are
selectable between SD and HD 7th-order filters.
AC- or DC-Coupled Outputs
The FMS6346E offers a fixed gain of 6dB.
Robust Output ESD Protection: 9kV HBM
The FMS6346E may be directly driven by a DC-coupled
DAC output or an AC-coupled signal. Internal diode
clamps and bias circuitry may be used if AC-coupled
inputs are required (see the Applications Information
section for details).
Three Selectable 8/30MHz (SD/HD) Filters
Three Fixed 8MHz (SD) Filters
Enable / Disable Pin
Input Clamp and Bias
Single Video Load Drive (2VPP, 150Ω, AV = 6dB)
Applications
Cable and Satellite Set-Top Boxes
DVD Players
The outputs can drive AC- or DC-coupled single (150Ω)
video loads. DC-coupling the outputs remove the need
for output coupling capacitors. The input DC levels are
offset approximately +280mV at the output.
HDTV
Portable Media Players (PMP)
Personal Video Recorders (PVR)
Video On Demand (VOD)
Ordering Information
Part Number
Operating
Temperature Range
Gain Setting
Package
Packing Method
FMS6346EMTC20X
-40°C to +85°C
6dB
20-Lead, Thin-Shrink SmallOutline Package (TSSOP)
2500 Units per Reel
© 2010 Fairchild Semiconductor Corporation
FMS6346E • Rev. 3.0.0
www.fairchildsemi.com
FMS6346E — Six-Channel, Selectable SD/HD VoltagePlus™ Video Filter Driver with Disable
August 2011
SD Y IN
Transparent Clamp
6d B
SD Y OUT
SD C IN
Bias
6d B
SD C OUT
SD CV IN
Transparent Clamp
6d B
SD CV OUT
SD / HD Y IN
Transparent Clamp
6d B
SD / HD Y OUT
SD /HD Pb IN
Bias
6d B
SD / HD Pb OUT
SD /HD Pr IN
Bias
6d B
SD / HD Pr OUT
ENB
FSEL
SHUTDOWN
Frequency Select
Figure 1. Block Diagram
© 2010 Fairchild Semiconductor Corporation
FMS6346E • Rev.3.0.0
FMS6346E — Six-Channel, Selectable SD/HD VoltagePlus™ Video Filter Driver with Disable
Functional Block Diagram
www.fairchildsemi.com
2
FMS6346E
Figure 2. Pin Layout
Pin Definitions
Pin#
Name
Type
Description
1
SD Y IN1
Input
SD Y Video Input, Channel 1
2
SD C IN2
Input
SD C Video Input, Channel 2
3
SD CV IN3
Input
SD CV Video Input, Channel 3
ENB
Input
Enable / Disable, ENB = GND (0): Device Enabled; ENB = HIGH (1):
Device Disabled
5
VCC
Input
+3.3V or 5.0V Supply
6
FcSEL
Input
Selects Filter Corner Frequency for Pins 7, 8, and 9: “0” = SD, “1” = HD
7
SD/HD Y IN1
Input
Selectable SD or HD Y Video Input, Channel 1
8
SD/HD Pb IN2
Input
Selectable SD or HD Pb Video Input, Channel 2
4
9
SD/HD Pr IN3
Input
Selectable SD or HD Pr Video Input, Channel 3
10
N/C
Input
No Connection
11
N/C
Input
No Connection
12
SD/HD Pr OUT3
Output
Filtered SD or HD Pr Video Output, Channel 3
13
SD/HD Pb OUT2
Output
Filtered SD or HD Pb Video Output, Channel 2
14
SD/HD Y OUT1
Output
Filtered SD or HD Y Video Output, Channel 1
15
N/C
Input
No Connection
16
GND
Input
Must Be Tied to Ground
17
GND
Input
Must Be Tied to Ground
18
SD CV OUT3
Output
19
SD C OUT2
Output
Filtered SD C Video Output, Channel 2
20
SD Y OUT1
Output
Filtered SD Y Video Output, Channel 1
© 2010 Fairchild Semiconductor Corporation
FMS6346E • Rev.3.0.0
FMS6346E — Six-Channel, Selectable SD/HD VoltagePlus™ Video Filter Driver with Disable
Pin Configuration
Filtered SD CV Video Output, Channel 3
www.fairchildsemi.com
3
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Symbol
Parameter
Min.
Max.
Unit
VCC
DC Supply Voltage
-0.3
6.0
V
VIO
Analog and Digital I/O
-0.3
VCC+0.3
V
IOUT
Output Current, Any One Channel, Do Not Exceed
50
mA
Max.
Unit
+150
°C
+150
°C
+260
°C
Reliability Information
Symbol
TJ
TSTG
Parameter
Min.
Typ.
Junction Temperature
Storage Temperature Range
-65
TL
Reflow Temperature
JA
Thermal Resistance, JEDEC Standard Multi-Layer Test
Boards, Still Air
74
°C/W
Electrostatic Discharge Information
Symbol
ESD
Parameter
Max.
Human Body Model, JESD22-A114
9
Charged Device Model, JESD22-C101
2
Unit
kV
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to Absolute Maximum Ratings.
Symbol
Parameter
TA
Operating Temperature Range
VCC
Supply Voltage Range
© 2010 Fairchild Semiconductor Corporation
FMS6346E • Rev.3.0.0
Min.
Typ.
-40
3.135
3.300
Max.
Unit
+85
°C
5.250
V
FMS6346E — Six-Channel, Selectable SD/HD VoltagePlus™ Video Filter Driver with Disable
Absolute Maximum Ratings
www.fairchildsemi.com
4
Unless otherwise noted, TA=25°C, VCC=3.3V, RSOURCE=37.5, inputs AC coupled with 0.1µF, all outputs AC coupled
with 220µF into 150 loads, and referenced to 400kHz.
Symbol
ICC
Parameter
Supply Current(1)
Conditions
Min.
Typ.
Max.
Units
VCC = 3.3V, No Load,
EN=LOW
50
62
mA
VCC = 5.0V, No Load,
EN = LOW
60
70
mA
200
µA
ICC_SD
Shutdown Supply Current
VCC = 3.3V or 5.0V, No
Load, EN = HIGH
10
VIN
Video Input Voltage Range
Referenced to GND if DC
Coupled
1.2
VIL
VIH
(1)
Digital Input Low
(1)
Digital Input High
EN = LOW, Device Enabled
EN = HIGH, Device
Disabled
VPP
0
0.8
V
2.4
VCC
V
IEN_Low
Input Current
VIL = 0.8V
0.01
1.00
µA
IEN_HIGH
Input Current
VIH = 2.4V
0.01
1.00
µA
PSRR
Power Supply Rejection
Ratio
-50
dB
Note:
1. 100% tested at TA=25°C.
Standard-Definition (480i) Electrical Characteristics
Unless otherwise noted, TA=25°C, VIN=1VPP, VCC=3.3V, RSOURCE=37.5, all inputs AC coupled with 0.1µF, all outputs
AC coupled with 220µF into 150 loads, and referenced to 400kHz.
Symbol
Parameter
(2)
Conditions
AVSD
Channel Gain
All SD Channels, DC
f01dBSD
-0.1dB Flatness
All SD Channels
f1dBSD
(2)
Min.
Typ.
Max.
Units
5.8
6.0
6.2
dB
5.5
MHz
-1dB Flatness
All SD Channels
5.50
7.15
MHz
fcSD
-3dB Bandwidth(2)
All SD Channels
6.5
8.0
MHz
fSBSD
Attenuation (Stopband Reject)(2)
All SD Channels at f = 27MHz
50
60
dB
DG
Differential Gain
All SD Channels
0.2
%
DP
Differential Phase
All SD Channels
0.4
°
Total Harmonic Distortion, Output
VOUT = 1.4VPP, 3.58MHz
0.4
%
Crosstalk (Channel-to-Channel)
1MHz
-70
dB
SNR
Signal-to-Noise Ratio(3)
NTC-7 Weighting, 100kHz
to 4.2MHz
72
dB
tpdSD
Propagation Delay
Delay from Input to Output,
4.5MHz
84
ns
CLGSD
Chroma Luma Gain
f = 3.58MHz
(Refer to SDIN at 400kHz)
100
%
CLDSD
Chroma Luma Delay
f = 3.58MHz
(Refer to SDIN at 400kHz)
6
ns
THD
XTALKSD
FMS6346E — Six-Channel, Selectable SD/HD VoltagePlus™ Video Filter Driver with Disable
DC Electrical Characteristics
Notes:
2. 100% tested at TA=25°C.
3. SNR=20 • log (714mV / rms noise).
© 2010 Fairchild Semiconductor Corporation
FMS6346E • Rev.3.0.0
www.fairchildsemi.com
5
Unless otherwise noted, TA=25°C, VIN=1VPP, VCC=3.3V, RSOURCE=37.5, all inputs AC coupled with 0.1µF, all outputs
AC coupled with 220µF into 150 loads, and referenced to 400kHz.
Symbol
AVHD
BW0.5dB
Parameter
(4)
Channel Gain
Conditions
All HD Channels, DC
(4)
+/-0.5dB Bandwidth
THD2
Output Distortion (All Channel)
THD2
XTALKHD
6.2
dB
31
MHz
32
MHz
RSOURCE = 75, f = 37.325MHz
6.5
dB
RSOURCE = 75, f = 44.25MHz
14.5
dB
All HD Channels
THD1
6.0
30
All HD Channels
-3dB Bandwidth(4)
Att78M
5.8
28
-1dB Bandwidth
Att74.25M
Units
MHz
BW-3dB
Normalized Stopband
Attenuation(4)
Max.
28
BW-1dB
Att44.25M
Typ.
All HD Channels
(4)
Att37.125M
Min.
RSOURCE = 75, f = 74.25MHz
40
44
dB
RSOURCE = 75, f = 78MHz
42
46
dB
f = 10MHz; VOUT = 1.4VPP
0.4
%
f = 15MHz; VOUT = 1.4VPP
0.4
%
f = 30MHz; VOUT = 1.4VPP
0.4
%
Crosstalk (Channel-to-Channel)
f = 1.0MHz; VOUT = 1.4VPP
-60
dB
SNR
Signal-to-Noise Ratio(5)
Weighted; 100kHz to 30MHz
72
dB
tpdHD
Propagation Delay
Delay from Input to Output,
10MHz
24
ns
Notes:
4. 100% tested at 25°C.
5. SNR=20 • log (714mV / rms noise).
© 2010 Fairchild Semiconductor Corporation
FMS6346E • Rev.3.0.0
FMS6346E — Six-Channel, Selectable SD/HD VoltagePlus™ Video Filter Driver with Disable
High-Definition Electrical Characteristics
www.fairchildsemi.com
6
10.0
0.0
‐10.0
Attenuation (dB)
‐20.0
‐30.0
‐40.0
‐50.0
‐60.0
‐70.0
50.00
45.00
40.00
35.00
30.00
25.00
20.00
15.00
10.00
5.00
0.00
‐80.0
Frequency (MHz)
Figure 3.
SD Frequency Response
1.0
0.5
Attenuation (dB)
0.0
‐0.5
‐1.0
‐1.5
‐2.0
‐2.5
8.00
7.00
6.00
5.00
4.00
3.00
2.00
1.00
0.00
‐3.0
Frequency (MHz)
Figure 4.
SD Frequency Response (Flatness)
10.0
0.0
Attenuation (dB)
‐10.0
‐20.0
FMS6346E — Six-Channel, Selectable SD/HD VoltagePlus™ Video Filter Driver with Disable
Typical Performance Characteristics
‐30.0
‐40.0
‐50.0
‐60.0
120.00
77.04
49.46
31.76
20.39
13.09
8.40
5.40
3.46
2.22
1.43
0.92
0.59
0.38
0.24
0.16
0.10
‐70.0
Frequency (MHz)
Figure 5.
© 2010 Fairchild Semiconductor Corporation
FMS6346E • Rev.3.0.0
HD Frequency Response
www.fairchildsemi.com
7
1.0
0.0
‐1.0
Attenuation (dB)
‐2.0
‐3.0
‐4.0
‐5.0
‐6.0
Frequency (MHz)
Figure 6.
© 2010 Fairchild Semiconductor Corporation
FMS6346E • Rev.3.0.0
HD Frequency Response (Flatness)
Figure 7.
Differential Gain
Figure 8.
Differential Phase
29.06
20.39
14.30
10.03
7.04
4.94
3.46
2.43
1.70
1.20
0.84
0.59
0.41
0.29
0.20
0.14
0.10
‐7.0
FMS6346E — Six-Channel, Selectable SD/HD VoltagePlus™ Video Filter Driver with Disable
Typical Performance Characteristics (Continued)
www.fairchildsemi.com
8
DVD Player or STB
3.3V or 5.0V
2
CVout
3
4
75
Video SoC
75
5
75
6
Y2out
7
Pbout
8
Prout
9
10
75
75
SD IN 2
SD OUT2
SD IN 3
SD OUT3
EN
GND
VCC
GND
FcSEL
N/C
SD/HD IN1 SD/HD OUT1
SD/HD IN2 SD/HD OUT2
SD/HD IN3 SD/HD OUT3
N/C
N/C
20
19
18
220uF
75
220uF
75
220uF
1
17
1
2
3
4
CV Output
S-Video Output
16
15
14
13
12
11
75
DAC load resistors
Figure 9. Typical Application
© 2010 Fairchild Semiconductor Corporation
FMS6346E • Rev.3.0.0
75
75
220uF
75
220uF
75
220uF
1
1
1
Y Output
Pb Output
2
Cout
SD OUT1
SD IN 1
Pr Output
2
1
2
Y1out
10uF
2
0.1uF
FMS6346E — Six-Channel, Selectable SD/HD VoltagePlus™ Video Filter Driver with Disable
Typical Application
www.fairchildsemi.com
9
Functional Description
The FMS6346E VoltagePlus™ video filter provides 6dB
gain from input to output. In addition, the input is slightly
offset to optimize the output driver performance. The
offset is held to the minimum required value to decrease
the standing DC current into the load. Typical voltage
levels are shown in Figure 10.
0.65V
YIN
Driver
1.0 -> 1.02V
800k
0.65 -> 0.67V
Figure 11. Input Clamp Circuit
0.3 -> 0.32V
0.0 -> 0.02V
V IN
I/O Configurations
For DC-coupled DAC drive with DC-coupled outputs,
use the configuration shown in Figure 12.
2.28V
1.58V
0.88V
0.28V
YOUT
V OUT
Driven by:
DC-Coupled DAC Outputs
AC-Coupled and Clamped
Y, CV, R, G, B
0V - 1.4V
DVD or
STB
SoC
DAC
Output
There is a 280mV offset from the DC input level to the
DC output level. VOUT = 2 • VIN + 280mV.
LCVF
Clamp
Inactive
75
Figure 12. DC-Coupled Inputs and Outputs
0.85V
If the DAC’s average DC output level causes the signal
to exceed the range of 0V to 1.4V, it can be AC coupled
as shown in Figure 13.
0.5V
0.15V
V IN
1.98V
0V - 1.4V
DVD or
STB
SoC
DAC
Output
Driven by:
AC-Coupled and Biased
U, V, Pb, Pr, C
1.28V
0.58V
V OUT
0.1μF
LCVF
Clamp
Active
75Ω
Figure 10. Typical Voltage Levels
Figure 13. AC-Coupled Inputs, DC-Coupled Outputs
The FMS6346E offers three channels with internal diode
clamps and three channels with biasing to support ACcoupled input signals. If the input signal does not go
below ground, the input clamp does not operate. This
allows DAC outputs to directly drive the FMS6346E
without an AC-coupling capacitor. The worst-case synctip compression due to the clamp does not exceed 7mV.
The input level set by the clamp, combined with the
internal DC offset, keeps the output within its acceptable
range. When the input is AC coupled, the diode clamp
sets the sync-tip (or lowest voltage) just below ground.
When driven by an unknown external source or a
SCART switch with its own clamping circuitry, the inputs
should be AC coupled as shown in Figure 14.
0V - 1.4V
0.1μF
External video
source must
be AC coupled
LCVF
Clamp
Active
75Ω
75Ω
For symmetric signals like C, Pb, and Pr; the average
DC bias is fairly constant and the inputs are biased to
set the DC input voltage to approximately 600mV. DAC
outputs can also drive these same signals without the
AC coupling capacitor. A conceptual illustration of the
input clamp circuit is shown in Figure 11.
© 2010 Fairchild Semiconductor Corporation
FMS6346E • Rev.3.0.0
FMS6346E — Six-Channel, Selectable SD/HD VoltagePlus™ Video Filter Driver with Disable
Applications Information
Figure 14. SCART Configuration with DC-Coupled
Outputs
www.fairchildsemi.com
10
External video
source must
be AC coupled
75Ω
0.1μF
Power Dissipation
The FMS6346E output drive configuration must be
considered when calculating overall power dissipation.
Care must be taken not to exceed the maximum die
junction temperature. The following example can be
used to calculate the power dissipation and internal
temperature rise:
7.5MΩ
LCVF
Bias
Input
75Ω
TJ = TA + Pd • θJA
500mV +/-350mV
(1)
where Pd = PCH1 + PCH2 + PCHx and
PCHx = VS • ICH - (VO2/RL)
Figure 15. Biased SCART with DC-Coupled Outputs
where VO = 2VIN + 0.280V
The same circuits can be used with AC-coupled outputs
if desired, as shown in Figure 16.
ICH = (ICC / 6) + (VO/RL)
0V - 1.4V
DVD or
STB
SoC
DAC
Output
LCVF
Clamp
Inactive
VIN = RMS value of input signal
ICC = 50mA, VS = 3.3V
220µF
75
RL = channel load resistance
Board layout affects thermal characteristics. Refer to the
Layout Considerations section for more information.
Output Considerations
The FMS6346E outputs are DC offset from the input by
150mV; therefore VOUT = 2•VIN DC+150mV. This offset
is required to obtain optimal performance from the
output driver and is held at the minimum value to
decrease the standing DC current into the load. Since
the FMS6346E has a 2 x (6dB) gain, the output is
typically connected via a 75Ω series back-matching
resistor followed by the 75Ω video cable. Due to the
inherent divide by two of this configuration, the blanking
level at the load of the video signal is always less then
1V. When AC-coupling the output, ensure that the
coupling capacitor passes the lowest frequency content
in the video signal and that line time distortion (video tilt)
is kept as low as possible.
Figure 16. DC-Coupled Inputs, AC-Coupled Outputs
0V - 1.4V
0.1μF
DVD or
STB
SoC
DAC
Output
LCVF
Clamp
Active
75Ω
220μF
Figure 17. Coupled Inputs, AC-Coupled Outputs
External video
source must
be AC coupled.
75W
The selection of the coupling capacitor is a function of
the subsequent circuit input impedance and the leakage
current of the input driven. To obtain the highest quality
output video signal, the series termination resistor must
be placed as close to the device output pin as possible.
This greatly reduces the parasitic capacitance and
inductance effect on the output driver. The distance from
the device pin to the series termination resistor should
be no greater than 12.7mm (0.5in).
7.5MW
0.1µF
LCVF
Clamp
Active
75W
220µF
500mV +/-350mV
Figure 18. Biased SCART with AC-Coupled Outputs
FMS6346E — Six-Channel, Selectable SD/HD VoltagePlus™ Video Filter Driver with Disable
The same method can be used to bias the clamp
signals.
Pad
Lead
Note:
6. The video tilt or line time distortion is dominated by
the AC-coupling capacitor. The value may need to
be increased beyond 220μF to obtain satisfactory
operation in some applications.
75-Ohm Series
Termination Resistor
Lead
Routing Trace
≤ 12.7mm
Pad for
Resistor
Figure 19. Termination Resistor Placement
© 2010 Fairchild Semiconductor Corporation
FMS6346E • Rev.3.0.0
www.fairchildsemi.com
11
Layout Considerations
General layout and supply bypassing play major roles in
high-frequency performance and thermal characteristics.
Fairchild
offers
a
demonstration
board,
FMS6346EDEMO, to guide layout and aid device testing
and characterization.
The FMS6346EDEMO is a four-layer board with a full
power and ground plane. Following this layout
configuration provides the optimum performance and
thermal characteristics. For best results, follow the steps
below as a basis for high-frequency layout:
Include 0.01μF and 0.1μF ceramic bypass capacitors.
Place the 0.01μF capacitor within 0.75 inches of the
power pin.
Place the 0.1μF capacitor within 0.1 inches of the
power pin.
For multi-layer boards, use a large ground plane to
help dissipate heat.
For two-layer boards, use a ground plane that extends
beyond the device by at least 0.5 inches.
Minimize all trace lengths to reduce series
inductances.
© 2007 Fairchild Semiconductor Corporation
www.fairchildsemi.com
FMS6346E — Six-Channel, Selectable SD/HD VoltagePlus™ Video Filter Driver with Disable
Physical Dimensions
Figure 20.
20-Lead, Thin-Shrink Small-Outline Package (TSSOP)
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the
warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/.
© 2010 Fairchild Semiconductor Corporation
FMS6346E • Rev.3.0.0
www.fairchildsemi.com
13
FMS6346E — Six-Channel, Selectable SD/HD VoltagePlus™ Video Filter Driver with Disable
14
www.fairchildsemi.com
© 2010 Fairchild Semiconductor Corporation
FMS6346E • Rev.3.0.0
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
© Semiconductor Components Industries, LLC
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
1
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
www.onsemi.com
工商网监
湘ICP备2023018690号
