Is Now Part of
To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
FNC42060F / FNC42060F2
Motion SPM® 45 Series
Features
General Description
• UL Certified No. E209204 (UL1557)
FNC42060F / FNC42060F2 is an advanced Motion
SPM® 45 module providing a fully-featured, high-performance inverter output stage for AC Induction, BLDC,
and PMSM motors. These modules integrate optimized
gate drive of the built-in IGBTs to minimize EMI and
losses, while also providing multiple on-module protection features including under-voltage lockouts, over-current shutdown, thermal monitoring, and fault reporting.
The built-in, high-speed HVIC requires only a single supply voltage and translates the incoming logic-level gate
inputs to the high-voltage, high-current drive signals
required to properly drive the module's robust short-circuit-rated IGBTs. Separate negative IGBT terminals are
available for each phase to support the widest variety of
control algorithms.
• 600 V - 20 A 3-Phase IGBT Inverter with Integral Gate
Drivers and Protection
• Low Thermal Resistance Using Ceramic Substrate
• Low-Loss, Short-Circuit Rated IGBTs
• Built-In Bootstrap Diodes and Dedicated Vs Pins Simplify PCB Layout
• Built-In NTC Thermistor for Temperature Monitoring
• Separate Open-Emitter Pins from Low-Side IGBTs for
Three-Phase Current Sensing
• Single-Grounded Power Supply
• Optimized for 5 kHz Switching Frequency
• Isolation Rating: 2000 Vrms / min.
Applications
• Motion Control - Home Appliance / Industrial Motor
Related Resources
• AN-9070 - Motion SPM® 45 Series Users Guide
• AN-9071 - Motion SPM® 45 Series Thermal Performance Information
• AN-9072 - Motion SPM® 45 Series Mounting Guidance
• RD-344 - Reference Design (Three Shunt Solution)
• RD-345 - Reference Design (One Shunt Solution)
Figure 1. Package Overview
Package Marking and Ordering Information
Device
Device Marking
Package
Packing Type
Quantity
FNC42060F
FNC42060F
SPMAA-A26
Rail
12
FNC42060F2
FNC42060F2
SPMAA-C26
Rail
12
©2013 Fairchild Semiconductor Corporation
FNC42060F / FNC42060F2 Rev. C3
1
www.fairchildsemi.com
FNC42060F / FNC42060F2 Motion SPM® 45 Series
January 2014
FNC42060F / FNC42060F2 Motion SPM® 45 Series
Integrated Power Functions
• 600 V - 20 A IGBT inverter for three-phase DC / AC power conversion (please refer to Figure 3)
Integrated Drive, Protection, and System Control Functions
• For inverter high-side IGBTs: gate drive circuit, high-voltage isolated high-speed level shifting
control circuit Under-Voltage Lock-Out (UVLO) protection
• For inverter low-side IGBTs: gate drive circuit, Short-Circuit Protection (SCP)
control supply circuit Under-Voltage Lock-Out (UVLO) protection
• Fault signaling: corresponding to UVLO (low-side supply) and SC faults
• Input interface: active-HIGH interface, works with 3.3 / 5 V logic, Schmitt trigger input
Pin Configuration
VB(U)(26)
VTH(1)
VS(U)(25)
R TH(2)
VB(V)(24)
VS(V)(23)
P(3)
VB(W)(22)
VS(W)(21)
U(4)
IN(UH)(20)
Case Temperature (TC)
Detecting Point
IN(VH)(19)
IN(WH)(18)
VCC(H)(17)
VCC(L)(16)
V(5)
W(6)
COM(15)
IN (UL)(14)
IN (VL)(13)
N U(7)
IN(WL)(12)
N V(8)
VFO(11)
NW(9)
CSC(10)
Figure 2. Top View
©2013 Fairchild Semiconductor Corporation
FNC42060F / FNC42060F2 Rev. C3
2
www.fairchildsemi.com
FNC42060F / FNC42060F2 Motion SPM® 45 Series
Pin Descriptions
Pin Number
Pin Name
1
VTH
2
RTH
3
P
Positive DC-Link Input
4
U
Output for U-Phase
5
V
Output for V-Phase
6
W
Output for W-Phase
7
NU
Negative DC-Link Input for U-Phase
8
NV
Negative DC-Link Input for V-Phase
9
NW
Negative DC-Link Input for W-Phase
10
CSC
Capacitor (Low-Pass Filter) for Short-circuit Current Detection Input
11
VFO
Fault Output
12
IN(WL)
Signal Input for Low-Side W-Phase
13
IN(VL)
Signal Input for Low-Side V-Phase
14
IN(UL)
Signal Input for Low-Side U-Phase
15
COM
Common Supply Ground
16
VCC(L)
Low-Side Common Bias Voltage for IC and IGBTs Driving
17
VCC(H)
High-Side Common Bias Voltage for IC and IGBTs Driving
18
IN(WH)
Signal Input for High-Side W-Phase
19
IN(VH)
Signal Input for High-Side V-Phase
20
IN(UH)
Signal Input for High-Side U-Phase
21
VS(W)
High-Side Bias Voltage Ground for W-Phase IGBT Driving
22
VB(W)
High-Side Bias Voltage for W-Phase IGBT Driving
23
VS(V)
High-Side Bias Voltage Ground for V-Phase IGBT Driving
24
VB(V)
High-Side Bias Voltage for V-Phase IGBT Driving
25
VS(U)
High-Side Bias Voltage Ground for U-Phase IGBT Driving
26
VB(U)
High-Side Bias Voltage for U-Phase IGBT Driving
©2013 Fairchild Semiconductor Corporation
FNC42060F / FNC42060F2 Rev. C3
Pin Description
Thermistor Bias Voltage
Series Resistor for the Use of Thermistor (Temperature Detection)
3
www.fairchildsemi.com
FNC42060F / FNC42060F2 Motion SPM® 45 Series
Internal Equivalent Circuit and Input/Output Pins
VTH (1)
Thermister
(26) VB(U)
(25) VS(U)
(24) VB(V)
(23) VS(V)
RTH (2)
P (3)
UVB
UVS
VVB
OUT(UH)
UVS
U(4)
VVS
(22) VB(W)
WVB
(21) VS(W)
(20) IN(UH)
(19) IN(VH)
(18) IN(WH)
WVS
IN(UH)
OUT(VH)
VVS
V (5)
IN(VH)
IN(WH)
(17) VCC(H)
(16) VCC(L)
(15) COM
(14) IN(UL)
(13) IN(VL)
(12) IN(WL)
(11) VFO
(10) CSC
VCC
OUT(WH)
COM
WVS
W(6)
VCC
OUT(UL)
COM
NU (7)
IN(UL)
IN(VL)
IN(WL)
OUT(VL)
NV (8)
VFO
C(SC)
OUT(WL)
NW (9)
Figure 3. Internal Block Diagram
1st Notes:
1. Inverter high-side is composed of three IGBTs, freewheeling diodes, and one control IC for each IGBT.
2. Inverter low-side is composed of three IGBTs, freewheeling diodes, and one control IC for each IGBT. It has gate drive and protection functions.
3. Inverter power side is composed of four inverter DC-link input terminals and three inverter output terminals.
©2013 Fairchild Semiconductor Corporation
FNC42060F / FNC42060F2 Rev. C3
4
www.fairchildsemi.com
unless otherwise specified.)
Inverter Part
Symbol
VPN
VPN(Surge)
VCES
Parameter
Conditions
Supply Voltage
Applied between P - NU, NV, NW
Supply Voltage (Surge)
Applied between P - NU, NV, NW
Rating
Unit
450
V
Collector - Emitter Voltage
500
V
600
V
± IC
Each IGBT Collector Current
TC = 25°C, TJ < 150°C
20
A
± ICP
Each IGBT Collector Current (Peak)
TC = 25°C, TJ < 150°C, Under 1 ms Pulse
Width
40
A
PC
Collector Dissipation
TC = 25°C per Chip
50
W
TJ
Operating Junction Temperature
(2nd Note 1)
-40 ~ 150
°C
Rating
Unit
2nd Notes:
1. The maximum junction temperature rating of the power chips integrated within the Motion SPM® 45 product is 150C.
Control Part
Symbol
Parameter
Conditions
VCC
Control Supply Voltage
Applied between VCC(H), VCC(L) - COM
20
V
VBS
High - Side Control Bias Voltage
Applied between VB(U) - VS(U), VB(V) - VS(V),
VB(W) - VS(W)
20
V
VIN
Input Signal Voltage
Applied between IN(UH), IN(VH), IN(WH), -0.3 ~ VCC + 0.3
IN(UL), IN(VL), IN(WL) - COM
V
VFO
Fault Output Supply Voltage
Applied between VFO - COM
-0.3 ~ VCC + 0.3
V
IFO
Fault Output Current
Sink Current at VFO pin
VSC
Current-Sensing Input Voltage
Applied between CSC - COM
1
mA
-0.3 ~ VCC + 0.3
V
Rating
Unit
Bootstrap Diode Part
Symbol
VRRM
Parameter
Conditions
600
V
IF
Maximum Repetitive Reverse Voltage
Forward Current
TC = 25°C, TJ < 150°C
0.50
A
IFP
Forward Current (Peak)
TC = 25°C, TJ < 150°C, Under 1 ms Pulse
Width
1.50
A
TJ
Operating Junction Temperature
-40 ~ 150
°C
Rating
Unit
400
V
-40 ~ 125
°C
2000
Vrms
Total System
Symbol
VPN(PROT)
Parameter
Self-Protection Supply Voltage Limit
(Short-Circuit Protection Capability)
TSTG
Storage Temperature
VISO
Isolation Voltage
Conditions
VCC = VBS = 13.5 ~ 16.5 V
TJ = 150°C, Non-Repetitive, < 2 s
60 Hz, Sinusoidal, AC 1 Minute, Connect
Pins to Heat Sink Plate
Thermal Resistance
Symbol
Rth(j-c)Q
Parameter
Junction to Case Thermal Resistance
Rth(j-c)F
Conditions
Min.
Typ.
Max.
Unit
Inverter IGBT Part (per 1 / 6 module)
-
-
2.5
°C / W
Inverter FWDi Part (per 1 / 6 module)
-
-
3.6
°C / W
2nd Notes:
2. For the measurement point of case temperature (TC), please refer to Figure 2.
©2013 Fairchild Semiconductor Corporation
FNC42060F / FNC42060F2 Rev. C3
5
www.fairchildsemi.com
FNC42060F / FNC42060F2 Motion SPM® 45 Series
Absolute Maximum Ratings (TJ = 25°C,
Inverter Part
Symbol
VCE(SAT)
VF
HS
tON
Parameter
Conditions
Min.
Typ.
Max.
Unit
Collector - Emitter Saturation VCC = VBS = 15 V
Voltage
VIN = 5 V
IC = 20 A, TJ = 25°C
-
1.85
2.35
V
FWDi Forward Voltage
VIN = 0 V
IF = 20 A, TJ = 25°C
-
1.95
2.45
V
Switching Times
VPN = 300 V, VCC = VBS = 15 V, IC = 20 A
TJ = 25°C
VIN = 0 V 5 V, Inductive Load
(2nd Note 3)
0.45
0.75
1.25
s
-
0.20
0.45
s
-
0.70
1.20
s
-
0.15
0.40
s
tC(ON)
tOFF
tC(OFF)
-
0.15
-
s
0.45
0.75
1.25
s
-
0.20
0.45
s
-
0.75
1.25
s
tC(OFF)
-
0.15
0.40
s
trr
-
0.15
-
s
-
-
5
mA
trr
LS
VPN = 300 V, VCC = VBS = 15 V, IC = 20 A
TJ = 25°C
VIN = 0 V 5 V, Inductive Load
(2nd Note 3)
tON
tC(ON)
tOFF
ICES
Collector - Emitter Leakage VCE = VCES
Current
2nd Notes:
3. tON and tOFF include the propagation delay of the internal drive IC. tC(ON) and tC(OFF) are the switching time of IGBT itself under the given gate driving condition internally. For
the detailed information, please see Figure 4.
100% I C 100% I C
t rr
V CE
IC
IC
V CE
V IN
V IN
t ON
t OFF
t C(ON)
t C(OFF)
10% I C
V IN(ON)
90% I C
V IN(OFF)
10% V CE
10% V CE
10% I C
(b) turn-off
(a) turn-on
Figure 4. Switching Time Definition
©2013 Fairchild Semiconductor Corporation
FNC42060F / FNC42060F2 Rev. C3
6
www.fairchildsemi.com
FNC42060F / FNC42060F2 Motion SPM® 45 Series
Electrical Characteristics (TJ = 25°C, unless otherwise specified.)
Control Part
Symbol
Parameter
IQCCH
Quiescent VCC Supply
Current
IQCCL
IPCCH
Operating VCC Supply
Current
IPCCL
Conditions
Min.
Typ.
Max.
Unit
VCC(H) = 15 V, IN(UH,VH,WH) = 0 V
VCC(H) - COM
-
-
0.10
mA
VCC(L) = 15 V, IN(UL,VL, WL) = 0 V
VCC(L) - COM
-
-
2.65
mA
VCC(L) = 15 V, fPWM = 20 kHz, duty VCC(H) - COM
= 50%, Applied to One PWM Signal Input for High-Side
-
-
0.15
mA
VCC(L) = 15 V, fPWM = 20 kHz, duty VCC(L) - COM
= 50%, Applied to One PWM Signal Input for Low-Side
-
-
4.00
mA
IQBS
Quiescent VBS Supply
Current
VBS = 15 V, IN(UH, VH, WH) = 0 V
VB(U) - VS(U), VB(V) VS(V), VB(W) - VS(W)
-
-
0.30
mA
IPBS
Operating VBS Supply
Current
VCC = VBS = 15 V, fPWM = 20 kHz, VB(U) - VS(U), VB(V) Duty = 50%, Applied to One PWM VS(V), VB(W) - VS(W)
Signal Input for High-Side
-
-
2.00
mA
VFOH
Fault Output Voltage
VSC = 0 V, VFO Circuit: 10 k to 5 V Pull-up
4.5
-
-
V
VSC = 1 V, VFO Circuit: 10 k to 5 V Pull-up
VFOL
VSC(ref)
Short-Circuit
Current Trip Level
UVCCD
UVCCR
UVBSD
Supply Circuit
Under-Voltage
Protection
UVBSR
tFOD
Fault-Out Pulse Width
VIN(ON)
ON Threshold Voltage
VIN(OFF)
RTH
-
-
0.5
V
VCC = 15 V (2nd Note 4)
0.45
0.50
0.55
V
Detection level
10.5
-
13.0
V
Reset level
11.0
-
13.5
V
Detection level
10.0
-
12.5
V
Reset level
10.5
-
13.0
V
30
-
-
s
-
-
2.6
V
0.8
-
-
V
Applied between IN(UH), IN(VH), IN(WH), IN(UL), IN(VL),
OFF Threshold Voltage IN(WL) - COM
Resistance of
Thermister
@TTH = 25°C, (2nd Note 5)
-
47
-
k
@TTH = 100°C
-
2.9
-
k
2nd Notes:
4. Short-circuit protection is functioning only at the low-sides.
5. TTH is the temperature of thermister itselt. To know case temperature (TC), please make the experiment considering your application.
©2013 Fairchild Semiconductor Corporation
FNC42060F / FNC42060F2 Rev. C3
7
www.fairchildsemi.com
FNC42060F / FNC42060F2 Motion SPM® 45 Series
Figure 5. Switching Loss Characteristics (Typical)
550
R-T Curve in 50℃ ~ 125℃
500
20
450
16
Resistance[k]
Resistance[k]
FNC42060F / FNC42060F2 Motion SPM® 45 Series
R-T Curve
600
400
350
300
250
12
8
4
200
0
50
60
70
150
80
90
100
110
120
Temperature [℃ ]
100
50
0
-20
-10
0
10
20
30
40
50
60
70
80
90
100
110
120
Temperature TTH[℃ ]
Figure. 6. R-T Curve of The Built-In Thermistor
Bootstrap Diode Part
Symbol
Parameter
Conditions
Min.
Typ.
Max.
Unit
VF
Forward Voltage
IF = 0.1 A, TC = 25°C
-
2.5
-
V
trr
Reverse-Recovery Time
IF = 0.1 A, TC = 25°C
-
80
-
ns
Built-In Bootstrap Diode VF-IF Characteristic
1.0
0.9
0.8
0.7
IF [A]
0.6
0.5
0.4
0.3
0.2
0.1
o
TC=25 C
0.0
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
VF [V]
Figure 7. Built-In Bootstrap Diode Characteristic
2nd Notes:
6. Built-in bootstrap diode includes around 15 Ω resistance characteristic.
©2013 Fairchild Semiconductor Corporation
FNC42060F / FNC42060F2 Rev. C3
8
www.fairchildsemi.com
Symbol
Parameter
Conditions
Applied between P - NU, NV, NW
Min.
Typ.
Max.
Unit
-
300
400
V
VPN
Supply Voltage
VCC
Control Supply Voltage
Applied between VCC(H), VCC(L) - COM
13.5
15.0
16.5
V
VBS
High-Side Bias Voltage
Applied between VB(U) - VS(U), VB(V) - VS(V), VB(W) VS(W)
13.0
15.0
18.5
V
-1
-
1
V / s
dVCC / dt, Control Supply Variation
dVBS / dt
tdead
Blanking Time for
Preventing Arm-Short
For each input signal
1.5
-
-
s
fPWM
PWM Input Signal
- 40C <TJ <150°C
-
-
20
kHz
VSEN
Voltage for Current
Sensing
Applied between NU, NV, NW - COM
(Including Surge-Voltage)
-4
4
V
Minimun Input Pulse
Width
(2nd Note 7)
s
PWIN(ON)
PWIN(OFF)
0.7
-
-
0.7
-
-
2nd Notes:
7. This product might not make response if input pulse width is less than the recommanded value.
Figure 8. Allowable Maximum Output Current
2nd Notes:
8. This allowable output current value is the reference data for the safe operation of this product. This may be different from the actual application and operating condition.
©2013 Fairchild Semiconductor Corporation
FNC42060F / FNC42060F2 Rev. C3
9
www.fairchildsemi.com
FNC42060F / FNC42060F2 Motion SPM® 45 Series
Recommended Operating Conditions
Parameter
Device Flatness
Mounting Torque
Conditions
See Figure 9
Min.
Typ.
Max.
Unit
0
-
+ 120
m
Mounting Screw: M3
Recommended 0.7 N • m
0.6
0.7
0.8
N•m
See Figure 10
Recommended 7.1 kg • cm
6.2
7.1
8.1
kg • cm
-
11.00
-
g
Weight
Figure 9. Flatness Measurement Position
Pre - Screwing : 1→2
2
Final Screwing : 2→1
1
Figure 10. Mounting Screws Torque Order
2nd Notes:
9. Do not make over torque when mounting screws. Much mounting torque may cause ceramic cracks, as well as bolts and Al heat-sink destruction.
10. Avoid one side tightening stress. Figure 10 shows the recommended torque order for mounting screws. Uneven mounting can cause the ceramic substrate of the SPM® 45
package to be damaged. The pre-screwing torque is set to 20 ~ 30% of maximum torque rating.
©2013 Fairchild Semiconductor Corporation
FNC42060F / FNC42060F2 Rev. C3
10
www.fairchildsemi.com
FNC42060F / FNC42060F2 Motion SPM® 45 Series
Mechanical Characteristics and Ratings
Input Signal
Protection
Circuit State
RESET
SET
RESET
UVCCR
a1
Control
Supply Voltage
a6
UVCCD
a3
a2
a7
a4
Output Current
a5
Fault Output Signal
a1 : Control supply voltage rises: after the voltage rises UVCCR, the circuits start to operate when next input is applied.
a2 : Normal operation: IGBT ON and carrying current.
a3 : Under-voltage detection (UVCCD).
a4 : IGBT OFF in spite of control input condition.
a5 : Fault output operation starts.
a6 : Under-voltage reset (UVCCR).
a7 : Normal operation: IGBT ON and carrying current.
Figure 11. Under-Voltage Protection (Low-Side)
Input Signal
Protection
Circuit State
RESET
SET
RESET
UVBSR
Control
Supply Voltage
b5
b1
UVBSD
b3
b6
b2
b4
Output Current
High-level (no fault output)
Fault Output Signal
b1 : Control supply voltage rises: after the voltage reaches UVBSR, the circuits start to operate when next input is applied.
b2 : Normal operation: IGBT ON and carrying current.
b3 : Under-voltage detection (UVBSD).
b4 : IGBT OFF in spite of control input condition, but there is no fault output signal.
b5 : Under-voltage reset (UVBSR).
b6 : Normal operation: IGBT ON and carrying current.
Figure 12. Under-Voltage Protection (High-Side)
©2013 Fairchild Semiconductor Corporation
FNC42060F / FNC42060F2 Rev. C3
11
www.fairchildsemi.com
FNC42060F / FNC42060F2 Motion SPM® 45 Series
Time Charts of Protective Function
c6
Protection
Circuit State
SET
Internal IGBT
Gate - Emitter Voltage
FNC42060F / FNC42060F2 Motion SPM® 45 Series
Lower Arms
Control Input
c7
RESET
c4
c3
c2
SC
c1
c8
Output Current
SC Reference Voltage
Sensing Voltage
of Shunt Resistance
Fault Output Signal
c5
CR Circuit Time
Constant Delay
(with the external shunt resistance and CR connection)
c1 : Normal operation: IGBT ON and carrying current.
c2 : Short-circuit current detection (SC trigger).
c3 : Hard IGBT gate interrupt.
c4 : IGBT turns OFF.
c5 : Input “LOW”: IGBT OFF state.
c6 : Input “HIGH”: IGBT ON state, but during the active period of fault output, the IGBT doesn’t turn ON.
c7 : IGBT OFF state.
Figure 13. Short-Circuit Protection (Low-Side Operation Only)
Input/Output Interface Circuit
+5 V (for MCU or Control power)
SPM
R PF = 10 kΩ
IN (UH) , IN (VH) , IN(WH)
IN (UL) , IN (VL) , IN(WL)
MCU
VFO
COM
Figure 14. Recommended MCU I/O Interface Circuit
2nd Notes:
11. RC coupling at each input (parts shown dotted) might change depending on the PWM control scheme in the application and the wiring impedance of the application’s printed
circuit board. The input signal section of the Motion SPM® 45 product integrates a 5 k(typ.) pull-down resistor. Therefore, when using an external filtering resistor, pay attention to the signal voltage drop at input terminal.
©2013 Fairchild Semiconductor Corporation
FNC42060F / FNC42060F2 Rev. C3
12
www.fairchildsemi.com
CBS
CBSC
RS
(25) VS(U)
VS(U)
(20) IN(UH)
(24) VB(V)
CBSC
(23) VS(V)
(19) IN(VH)
Gating VH
IN(VH)
CBSC
CBS
RS
OUT(VH)
VS(V)
(22) VB(W)
V (5)
M
VB(W)
(21) VS(W)
VS(W)
(18) IN(WH)
Gating WH
IN(WH)
(17) VCC(H)
+15 V
CPS
U (4)
VS(U)
VB(V)
VS(V)
RS
M
C
U
OUT(UH)
IN(UH)
Gating UH
CBS
P (3)
VB(U)
CPS
CPS
CSPC15
CSP15
CDCS
OUT(WH)
VDC
VCC
VS(W)
(15) COM
W (6)
COM
LVIC
+5 V
(16) VCC(L)
VCC
OUT(UL)
RPF
NU (7)
CSPC05 CSP05
RS
(11) VFO
Fault
CBPF
RSU
VFO
CPF
RS
(14) IN(UL)
RS
(13) IN(VL)
RS
(12) IN(WL)
Gating UL
Gating VL
Gating WL
CSC
RF
RTH
NV (8)
RSV
IN(VL)
IN(WL)
COM
(10) CSC
CPS CPS CPS
Input Signal for
Short-Circuit Protection
OUT(VL)
IN(UL)
OUT(WL)
CSC
NW (9)
RSW
(1) VTH
(2) RTH
THERMISTOR
Temp. Monitoring
U-Phase Current
V-Phase Current
W-Phase Current
Figure 15. Typical Application Circuit
3rd Notes:
1) To avoid malfunction, the wiring of each input should be as short as possible (less than 2 - 3 cm).
2) By virtue of integrating an application-specific type of HVIC inside the Motion SPM® 45 product, direct coupling to MCU terminals without any optocoupler or transformer isolation is possible.
3) VFO output is open-drain type. This signal line should be pulled up to the positive side of the MCU or control power supply with a resistor that makes IFO up to 1 mA (please
refer to Figure 14).
4) CSP15 of around seven times larger than bootstrap capacitor CBS is recommended.
5) Input signal is active-HIGH type. There is a 5 k resistor inside the IC to pull down each input signal line to GND. RC coupling circuits is recommanded for the prevention of
input signal oscillation. RSCPS time constant should be selected in the range 50 ~ 150 ns (recommended RS = 100 Ω , CPS = 1 nF).
6) To prevent errors of the protection function, the wiring around RF and CSC should be as short as possible.
7) In the short-circuit protection circuit, please select the RFCSC time constant in the range 1.5 ~ 2 s.
8) The connection between control GND line and power GND line which includes the NU, NV, NW must be connected to only one point. Please do not connect the control GND
to the power GND by the broad pattern. Also, the wiring distance between control GND and power GND should be as short as possible.
9) Each capacitor should be mounted as close to the pins of the Motion SPM 45 product as possible.
10) To prevent surge destruction, the wiring between the smoothing capacitor and the P & GND pins should be as short as possible. The use of a high-frequency non-inductive
capacitor of around 0.1 ~ 0.22 F between the P and GND pins is recommended.
11) Relays are used in almost every systems of electrical equipment in home appliances. In these cases, there should be sufficient distance between the MCU and the relays.
12) The zener diode or transient voltage suppressor should be adopted for the protection of ICs from the surge destruction between each pair of control supply terminals
(recommanded zener diode is 22 V / 1 W, which has the lower zener impedance characteristic than about 15 Ω ).
13) Please choose the electrolytic capacitor with good temperature characteristic in CBS. Also, choose 0.1 ~ 0.2 F R-category ceramic capacitors with good temperature and
frequency characteristics in CBSC.
14) For the detailed information, please refer to the AN-9070, AN-9071, AN-9072, RD-344, and RD-345.
©2013 Fairchild Semiconductor Corporation
FNC42060F / FNC42060F2 Rev. C3
13
www.fairchildsemi.com
FNC42060F / FNC42060F2 Motion SPM® 45 Series
HVIC
(26) VB(U)
FNC42060F / FNC42060F2 Motion SPM® 45 Series
Detailed Package Outline Drawings (FNC42060F)
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or data on the drawing and contact a FairchildSemiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide therm and conditions,
specifically the the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/dwg/MO/MOD26AA.pdf
©2013 Fairchild Semiconductor Corporation
FNC42060F / FNC42060F2 Rev. C3
14
www.fairchildsemi.com
FNC42060F / FNC42060F2 Motion SPM® 45 Series
Detailed Package Outline Drawings (FNC42060F2, Long Terminal Type)
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or data on the drawing and contact a FairchildSemiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide therm and conditions,
specifically the the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/dwg/MO/MOD26AC.pdf
©2013 Fairchild Semiconductor Corporation
FNC42060F / FNC42060F2 Rev. C3
15
www.fairchildsemi.com
©2013 Fairchild Semiconductor Corporation
FNC42060F / FNC42060F2 Rev. C3
16
www.fairchildsemi.com
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
© Semiconductor Components Industries, LLC
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
1
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
www.onsemi.com