FOD8342TR2

DATA SHEET www.onsemi.com 3.0 A Output Current, High Speed Gate Drive Optocoupler in Stretched Body SOP 6-Pin SOIC6 CASE 751EL FOD8342, FOD8342T SOIC6 W CASE 751EM MARKING DIAGRAM Description The FOD8342 series is a 3.0 A output current gate drive optocoupler, capable of driving medium−power IGBT/ MOSFETs. It is ideally suited for fast−switching driving of power IGBT and MOSFET used in motor−control inverter applications, and high−performance power systems. The FOD8342 series utilizes stretched body package to achieve 8 mm creepage and clearance distances (FOD8342T), and optimized IC design to achieve reliably high−insulation voltage and high−noise immunity. The FOD8342 series consists of an Aluminum Gallium Arsenide (AlGaAs) Light−Emitting Diode (LED) optically coupled to an integrated circuit with a high−speed driver for push−pull MOSFET output stage. The device is housed in a stretched body, 6−pin, small outline, plastic package. 8342(T) VYYWWP 8342(T) V YY WW P = Specific Device Number = DIN EN/IEC60747−5−5 Option = Two Digit Year Code = Two Digit Work Week = Assembly Package Code FUNCTIONAL SCHEMATIC ANODE 1 6 VDD Features • FOD8342T − 8 mm Creepage and Clearance Distance, and 0.4 mm • • • • • • • Insulation Distance to Achieve Reliable and High−Voltage Insulation 3.0 A Peak Output Current Driving Capability for Medium− Power IGBT/MOSFET ♦ Use of P−Channel MOSFETs at Output Stage Enables Output Voltage Swing Close to Supply Rail 20 kV/ms Minimum Common Mode Rejection Wide Supply Voltage Range: 10 V to 30 V Fast Switching Speed Over Full Operating Temperature Range ♦ 210 ns Maximum Propagation Delay ♦ 65 ns Maximum Pulse Width Distortion Under−Voltage Lockout (UVLO) with Hysteresis Extended Industrial Temperate Range: −40°C to 100°C Safety and Regulatory Approvals: ♦ UL1577, 5,000 VRMS for 1 Minute ♦ DIN EN/IEC60747−5−5, 1,140V Peak Working Insulation Voltage Applications • • • • • February, 2022 − Rev. 2 5 VO CATHODE 3 4 VSS ORDERING INFORMATION See detailed ordering, marking and shipping information in the package dimensions section on page 18 of this data sheet. Related Resources • FOD3182, 3 A Output Current, High Speed AC and Brushless DC Motor Drives Industrial Inverter Uninterruptible Power Supply Induction Heating Isolated IGBT/Power MOSFET Gate Drive © Semiconductor Components Industries, LLC, 2015 2 MOSFET Gate Drive Optocoupler • FOD8314, FOD8314T, 1.0 A Output • 1 Current, Gate Drive Optocoupler in Stretched Body SOP 6−Pin www.onsemi.com Publication Order Number: FOD8342/D FOD8342, FOD8342T Table 1. TRUTH TABLE LED VDD − VSS “Positive Going” (Turn−On) VDD − VSS “Negative Going” (Turn−Off) VO Off 0 V to 30 V 0 V to 30 V LOW On 0 V to 7 V 0 V to 6.5 V LOW On 7 V to 9.5 V 6.5 V to 9 V Transition On 9.5 V to 30 V 9 V to 30 V HIGH Table 2. PIN DESCRIPTION ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ Pin No. Name 1 ANODE Description 2 N.C 3 CATHODE 4 VSS Negative Supply Voltage 5 VO Output Voltage 6 VDD Positive Supply Voltage LED Anode Not Connection LED Cathode Pin Configuration ANODE N.C 1 6 2 5 3 4 CATHODE Figure 1. Pin Configuration www.onsemi.com 2 VDD VO VSS FOD8342, FOD8342T Table 3. SAFETY AND INSULATION RATINGS As per DIN_EN/IEC60747−5−5. This optocoupler is suitable for “safe electrical insulation” only within the safety limit data. Compliance with the safety ratings shall be ensured by means of protective circuits. Parameter Symbol Installation Classifications per DIN VDE 0110/1.89 Table 1, For Rated Main Voltage FOD8342 FOD8342T