FODM3052V-NF098

DATA SHEET www.onsemi.com 4-Pin Full Pitch Mini-Flat Package Random-Phase Triac Driver Output Optocouplers FODM3011, FODM3012, FODM3022, FODM3023, FODM3052, FODM3053 MFP−4 CASE 100AP MARKING DIAGRAM Description The FODM301X, FODM302X, and FODM305X series consists of a GaAs infrared emitting diode driving a silicon bilateral switch housed in a compact 4−pin mini−flat package. The lead pitch is 2.54 mm. They are designed for interfacing between electronic controls and power triacs to control resistive and inductive loads for 115 V/240 V operations. Features • Compact 4−pin Surface Mount Package • • • (2.4 mm Maximum Standoff Height) Peak Blocking Voltage ♦ 250 V (FODM301X) ♦ 400 V (FODM302X) ♦ 600 V (FODM305X) Safety and Regulatory Approvals: ♦ UL1577, 3,750 VACRMS for 1 Minute ♦ DIN−EN/IEC60747−5−5, 565 V Peak Working Insulation Voltage These are Pb−Free Devices 3011 VXYYR 3011 = Specific Device Code V = DIN EN/IEC60747−5−5 Option (only appears on component ordered with this option) X = One Digit Year Code, e.g., “6” YY = Digit Work Week, Ranging from “01” to “53” R = Assembly Package Code FUNCTIONAL SCHEMATIC ANODE 1 MAIN 4 TERMINAL CATHODE 2 3 MAIN TERMINAL Applications • • • • • • • • • Industrial Controls Traffic Lights Vending Machines Solid State Relay Lamp Ballasts Solenoid/Valve Controls Static AC Power Switch Incandescent Lamp Dimmers Motor Control © Semiconductor Components Industries, LLC, 2003 March, 2022 − Rev. 4 ORDERING INFORMATION See detailed ordering and shipping information on page 8 of this data sheet. 1 Publication Order Number: FODM3053−NF098/D FODM3011, FODM3012, FODM3022, FODM3023, FODM3052, FODM3053 SAFETY AND INSULATION RATINGS (As per DIN EN/IEC 60747−5−5, this optocoupler is suitable for “safe electrical insulation” only within the safety limit data. Compliance with the safety ratings shall be ensured by means of protective circuits.) Parameter Characteristics Installation Classifications per DIN VDE 0110/1.89 Table 1, For Rated Mains Voltage > 100 ms 10 8 6 4 2 0 1 1.4 NORMALIZED TO TA = 25°C 1.3 1.2 1.1 1.0 0.9 0.8 0.7 0.6 −40 100 10 −20 PWIN, LED TRIGGER PULSE WIDTH (ms) 400 300 0 20 TA = 25°C 100 0 −100 −200 −300 −3 −2 60 80 Figure 6. Normalized Off−State Output Terminal Voltage vs. Ambient Temperature 200 −400 −4 40 TA, AMBIENT TEMPERATURE (°C) Figure 5. LED Current Required to Trigger vs. LED Pulse Width ITM, ON−STAE CURRENT (mA) IFT(NORMALIZED) = IFT (PWIN) / IFT (PWA >> 100 ms) TYPICAL PERFORMANCE CHARACTERISTICS (continued) −1 0 1 2 3 VTM, ON−STATE VOLTAGE (V) Figure 7. On−State Characteristics www.onsemi.com 5 4 100 FODM3011, FODM3012, FODM3022, FODM3023, FODM3052, FODM3053 TYPICAL APPLICATION INFORMATION RL Rin VCC 1 2 180 Ω 4 120 V 60 Hz FODM3011 FODM3012 FODM3022 FODM3023 FODM3052 FODM3053 3 Figure 8. Resistive Load ZL VCC Rin 1 2 2.4 k Ω 180 Ω 4 FODM3011 FODM3012 FODM3022 FODM3023 FODM3052 FODM3053 0.1 μF C1 120 V 60 Hz 3 Figure 9. Inductive Load with Sensitive Gate Triac (IGT 3 15 mA) VCC Rin 1 2 4 FODM3022 FODM3023 FODM3052 FODM3053 360 Ω 470 Ω 0.05 μF HOT 39 Ω 3 240 VAC 0.01 μF LOAD GROUND In this circuit the “hot” side of the line is switched and the load connected to the cold or ground side. The 39 W resistor and 0.01 mF capacitor are for snubbing of the trisc, and the 470 W resistor and 0.05 mF capacitor are for snubbing the coupler. These components may or may not be necessary depending upon the particular and load used. Figure 10. Typical Application Circuit www.onsemi.com 6 FODM3011, FODM3012, FODM3022, FODM3023, FODM3052, FODM3053 REFLOW PROFILE 260 240 220 TP Maximum Ramp−up Rate = 3°C/s Maximum Ramp−down Rate = 6°C/s tP TL 200 T smax Temperature (°C) 180 160 140 TL Preheat Area T smin ts 120 100 80 60 40 20 0 120 240 360 Time 25°C to Peak Time (seconds) Figure 11. Reflow Profile Table 1. REFLOW PROFILE Profile Freature Pb−Free Assembly Profile Temperature Minimum (Tsmin) 150°C Temperature Maximum (Tsmax) 200°C Time (tS) from (Tsmin to Tsmax) 60 – 120 seconds Ramp−up Rate (tL to tP) 3°C/second maximum Liquidous Temperature (TL) 217°C Time (tL) Maintained Above (TL) 60 – 150 seconds Peak Body Package Temperature 260°C +0°C / –5°C Time (tP) within 5°C of 260°C 30 seconds Ramp−down Rate (TP to TL) 6°C/second maximum Time 25°C to Peak Temperature 8 minutes maximum www.onsemi.com 7 FODM3011, FODM3012, FODM3022, FODM3023, FODM3052, FODM3053 ORDERING INFORMATION (Note 5) Part Number Package Shipping† FODM3011−NF098 Full Pitch Mini−Flat 4−Pin 100 Units / Tube FODM3011R2−NF098 Full Pitch Mini−Flat 4−Pin 2500 / Tape & Reel FODM3011V−NF098 Full Pitch Mini−Flat 4−Pin, DIN EN/IEC60747−5−5 Option 100 Units / Tube FODM3011R2V−NF098 Full Pitch Mini−Flat 4−Pin, DIN EN/IEC60747−5−5 Option 2500 / Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. 5. The product orderable part number system listed in this table also applies to the FODM3012, FODM3022, FODM3023, FODM3052, and FODM3053 products. www.onsemi.com 8 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS MFP4 3.85X4.4, 2.54P CASE 100AP ISSUE O DOCUMENT NUMBER: DESCRIPTION: 98AON13488G MFP4 3.85X4.4, 2.54P DATE 31 AUG 2016 Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2019 www.onsemi.com onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. ADDITIONAL INFORMATION TECHNICAL PUBLICATIONS: Technical Library: www.onsemi.com/design/resources/technical−documentation onsemi Website: www.onsemi.com  ONLINE SUPPORT: www.onsemi.com/support For additional information, please contact your local Sales Representative at www.onsemi.com/support/sales