FODM8801BR2V

OptoHiTE Series, High-Temperature Phototransistor Optocoupler in Half-Pitch Mini-Flat 4-Pin Package FODM8801A, FODM8801B, FODM8801C www.onsemi.com HALF−PITCH MINI−FLAT Description In the OptoHiT series, the FODM8801 is a first−of−kind phototransistor, utilizing ON Semiconductor’s leading−edge proprietary process technology to achieve high operating temperature characteristics, up to 125°C. The opto−coupler consists of an aluminum gallium arsenide (AlGaAs) infrared light−emitting diode (LED) optically coupled to a phototransistor, available in a compact half−pitch, mini− flat, 4−pin package. It delivers high current transfer ratio at very low input current. The input−output isolation voltage, VISO, is rated at 3750 VACRMS. MFP4 2.5 x 4.4, 1.27P CASE 100AL MARKING DIAGRAM ON 8801x VXYYM Features • Utilizing Proprietary Process Technology to Achieve High Operating • • • • • • Temperature: Up to 125°C Guaranteed Current Transfer Ratio (CTR) Specifications Across Full Temperature Range ♦ Excellent CTR Linearity at High−Temperature ♦ CTR at Very Low Input Current, IF High Isolation Voltage Regulated by Safety Agency: C−UL / UL1577, 3750 VACRMS for 1 Minute and DIN EN/IEC60747−5−5 Compact Half−Pitch, Mini−Flat, 4−Pin Package (1.27 mm Lead Pitch, 2.4 mm Maximum Standoff Height) >5 mm Creepage and Clearance Distance Applicable to Infrared Ray Reflow, 245°C These are Pb−Free Devices 8801x = Specific Device Code (x = A, B, C) V = DIN EN/IEC60747−5−5 Option (only appears on component ordered with this option) X = One−Digit Year Code YY = Digit Work Week M = Assembly Package Code PIN CONNECTIONS ANODE 1 CATHODE 2 4 COLLECTOR 3 EMITTER Applications • • • • • Primarily Suited for DC−DC Converters Ground−Loop Isolation, Signal−Noise Isolation Communications – Adapters, Chargers Consumer – Appliances, Set−Top Boxes Industrial – Power Supplies, Motor Control, Programmable Logic Control © Semiconductor Components Industries, LLC, 2010 June, 2020 − Rev. 4 1 ORDERING INFORMATION See detailed ordering and shipping information on page 9 of this data sheet. Publication Order Number: FODM8801A/D FODM8801A, FODM8801B, FODM8801C SAFETY AND INSULATION RATINGS (As per DIN EN/IEC 60747−5−5, this optocoupler is suitable for “safe electrical insulation” only within the safety limit data. Compliance with the safety ratings shall be ensured by means of protective circuits.) Parameter Characteristics Installation Classifications per DIN VDE 0110/1.89 Table 1, For Rated Mains Voltage