FS8S0965RCBYDTU

www.fairchildsemi.com FS8S0965RCB Fairchild Power Switch(FPS) Features Description • Burst Mode Operation to Reduce the Power Consumption in the Standby Mode • External pin for Synchronization and Soft Start • Wide Operating Frequency Range up to 150kHz • Low Start-up Current (Max:80uA) • Low Operating Current (Max:15mA) • Pulse by Pulse Current Limiting • Over Voltage Protection (Auto Restart Mode) • Over Load Protection (Auto Restart Mode) • Abnormal Over Current Protection (Auto Restart Mode) • Internal Thermal Shutdown (Auto Restart Mode) • Under Voltage Lockout • Internal High Voltage SenseFET FS8S0965RCB is a Fairchild Power Switch (FPS) that is specially designed for off-line SMPS of CRT monitor with minimal external components. This device is a current mode PWM controller combined with a high voltage power SenseFET in a single package. The PWM controller features integrated oscillator to be synchronized with the external sync signal, under voltage lockout, optimized gate driver and temperature compensated precise current sources for the loop compensation. This device also includes various fault protection circuits such as over voltage protection, over load protection, abnormal over current protection and over temperature protection. Compared with discrete MOSFET and PWM controller solution, FPS can reduce total cost, component count, size and weight simultaneously increasing efficiency, productivity and system reliability. This device is well suited for the cost effective monitor power supply. Application • Monitor SMPS TO-220-5L 1 1. Drain 2. GND 3. VCC 4. Feedback 5. Sync Internal Block Diagram Vcc 3 Vref Drain 1 Vcc good Soft start 5 & Sync Burst Mode Detector Vfb3V No sync Burst Mode Controller Vcc Internal Bias OSC Vref Idelay FB 9V/15V Vref Sync Detector Vref PWM IFB 4 S Q R Q Gate driver 2.5R R LEB V SD Vcc S Q R Q Vovp TSD 2 GND UVLO Reset (Vcc