Is Now Part of
To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
FSA2147 — Low-Voltage, DPST Analog Switch with
Negative Signal Capability and Built-in Termination
to Eliminate Pop
Features
Description
Built-In Termination on Unselected Audio Paths
Inhibits Audio Pop
6pF Typical Switch Off Capacitance
The FSA2147 is a Double-Pole, Single Throw (DPST)
switch. The audio path defaults to audio mute and is
enabled with /OE. The FSA2147 includes a power-off
feature on the common port when VCC=0V to guarantee
signal isolation.
2.5Ω Typical On Resistance
Negative-Swing-Capable
IMPORTANT NOTE:
Power-Off Protection
For
additional
information,
analogswitch@fairchildsemi.com.
Flow-Through Pin Out Eliminates PCB Vias
please
contact
Applications
MP3 Player, Cell Phone, PDA, Digital Camera, and
Notebook Computers
Ordering Information
Part
Number
Top
Mark
FSA2147K8X
2147
Operating
Eco
Temperature Range Status
-40°C to +85°C
RoHS
Package Description
Packing
Method
8-Lead US8, JEDEC MO-187, Variation
CA, 3.0mm Wide Package
3000 Units
Tape and Reel
For Fairchild’s definition of Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html.
VCC
Rpu
Control
Block
R
/OE
R
RT
L
L
RT
Figure 1.
© 2008 Fairchild Semiconductor Corporation
FSA2147 Rev. 1.0.1
Analog Symbol
www.fairchildsemi.com
FSA2147 — Low-Voltage, DPST Analog Switch with Negative Signal Capability and Built-in Termination to Eliminate Pop
July 2009
NC
1
8
VCC
/R
2
7
/OE
/L
3
6
R
GND
4
5
L
Figure 2.
8-Pin US8
Pin Descriptions
Pin #
Name
Description
8
VCC
Power supply.
7
/OE
Output enable. This pin defaults HIGH, allowing the user to mute the audio channel during
power up. The audio path is only connected when /OE is driven LOW.
6, 5
R, L
Audio right and left input sources.
2, 3
/R, /L
Audio common connector port.
Truth Table
VCC
/OE
LOW
Switch
OPEN
HIGH
LOW
ON
HIGH
HIGH
OPEN
© 2008 Fairchild Semiconductor Corporation
FSA2147 Rev. 1.0.1
www.fairchildsemi.com
2
FSA2147 — Low-Voltage, DPST Analog Switch with Negative Signal Capability and Built-in Termination to Eliminate Pop
Pin Configuration
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Symbol
Parameter
VCC
Supply Voltage
/OE
Output Enable Control Signal
VSW
Max.
Units
-0.5
4.6
V
-0.5
4.6
V
4.6
V
IIK
Input Clamp Diode Current
- 50
mA
ISW
Switch I/O Current (Continuous)
100
mA
Peak Switch Current (Pulsed at 1ms Duration,