FSA2257MUX

Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. FSA2257 Low RON, Low-Voltage Dual SPDT Bi-Directional Analog Switch Features Description        The FSA2257 is a high-performance bi-directional dual Single-Pole/Double-Throw (SPDT) analog switch. This switch can be configured as either a multiplexer or a demultiplexer by select pins. The device features ultra-low RON of 1.3  maximum at 4.5 V VCC and operates over the wide VCC range of 1.65 V to 5.50 V. The device is fabricated with submicron CMOS technology to achieve fast switching speeds and is designed for break-beforemake operation. The select input is TTL-level compatible. Maximum 1.15  On Resistance (RON) at 4.5 V VCC 0.3  Maximum RON Flatness at +5 V VCC Space-Saving MicroPak™ Broad VCC Operating Range: 1.65 V to 5.50 V Fast Turn-On and Turn-Off Time Break-Before-Make Enable Circuitry Over-Voltage Tolerant TTL-Compatible Control Input Applications    Cell Phone PDA Mobile Devices Ordering Information Package Number Top Mark FSA2257L10X MAC10A EP FSA2257MTCX MCT14 FSA2257 MUA10A FSA 2257 Part Number FSA2257MUX Package Description Packing Method 10-Lead MicroPak™, 1.6 x 2.1 mm 5000 Units Tape and Reel 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4 mm Wide 2500 Units Tape and Reel 10-Lead Molded Small Outline Package (MSOP), JEDEC MO-187, 3.0 mm 4000 Units Tape and Reel Figure 1. Block Diagram © 2006 Fairchild Semiconductor Corporation FSA2257 • Rev. 1.0.6 www.fairchildsemi.com FSA2257— Low RON, Low-Voltage Dual SPDT Bi-Directional Analog Switch May 2013 Figure 2. Pin Assignments for TSSOP (Top View) Figure 3. MicroPak™ Pad Assignments (Top View) Figure 4. Pin Assignments for MSOP (Top View) Figure 5. Analog Symbols (Top Through View) Pin Definitions Pin# TSSOP Pin# MicroPak™ Pin # MSOP Name 1 7 4 1A 2,5 10 8 GND 3 9 5 1B0 Data Ports 4 3 9 2A Data Ports 6 1 10 2B0 Data Ports NC No Connect 7,8 Description Data Ports FSA2257— Low RON, Low-Voltage Dual SPDT Bi-Directional Analog Switch Pin Configurations Ground 9 4 1 2B1 Data Ports 10 2 2 2S Control Inputs 11,14 5 3 VCC Power Supply 12 6 6 1B1 Data Ports 13 8 7 1S Control Inputs Truth Table Control Input (S) Function Low Logic Level B0 connected to A High Logic Level B1 connected to A © 2006 Fairchild Semiconductor Corporation FSA2257 • Rev. 1.0.6 www.fairchildsemi.com 2 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol VCC Parameter Supply Voltage (1) Min. Max. Unit -0.5 6.0 V VSW DC Switch Voltage -0.5 VCC + 0.5 V VIN DC Input Voltage(1) -0.5 6.0 V Input Diode Current -50 Switch Current 200 mA Peak Switch Current (Pulsed at 1 ms duration,