FSA2268L10X

Features Description     0.4Ω Typical On Resistance (RON) for +3.0V Supply The FSA2268 is a high-performance, dual Single Pole Double Throw (SPDT) analog switch that features ultra-low RON of 0.4 (typical) at 3.0V VCC. The FSA2268 operates over a wide VCC range of 1.65V to 4.3V and is designed for break-before-make operation. The select input is TTL-level compatible.     Packaged in Pb-free 10-Lead µMLP (1.4 x 1.8mm)  0.25Ω Maximum RON Flatness for +3.0V Supply -3db Bandwidth: > 50MHz Low ICCT Current Over an Expanded Control Input Range Power-Off Protection on Common Ports Broad VCC Operating Range: 1.65 to 4.3V HBM JEDEC: JESD22-A114 - I/O to GND: 13.5kV - Power to GND: 16.0kV Noise Immunity Termination Resistors in FSA2268T The FSA2268 features very low quiescent current even when the control voltage is lower than the VCC supply. This feature suits mobile handset applications by allowing direct interface with baseband processor general-purpose I/Os with minimal battery consumption. The FSA2268T includes termination resistors that improve noise immunity during overshoot excursions, off-isolation coupling, or “pop-minimization.” Applications   Cell Phone, PDA, Digital Camera, and Notebook LCD Monitor, TV, and Set-Top Box Ordering Information Part Number Top Mark Package Description FSA2268UMX GF 10-Lead, Quad Ultrathin Molded Leadless Package (UMLP), 1.4 x 1.8mm, 0.4mm Pitch FSA2268TUMX GH 10-Lead, Quad Ultrathin Molded Leadless Package (UMLP), 1.4 x 1.8mm, 0.4mm Pitch FSA2268L10X GH 10-Lead, MicroPak™, 1.6mm Wide Analog Symbols Figure 1. FSA2268 © 2007 Semiconductor Components Industries, LLC. December-2017, Rev. 2 Figure 2. FSA2268T (with Noise Termination Resistors) Publication Order Number: FSA2268T/D FSA2268 / FSA2268T — Low-Voltage Dual-SPDT (0.4) Analog Switch with 16kV ESD FSA2268 / FSA2268T Low-Voltage Dual-SPDT (0.4) Analog Switch with 16kV ESD Vcc 10 2B0 1B1 2B1 GND 2A 3 2 1 6 1 9 1A 1B1 2 8 S1 2B0 3 7 S2 2B1 4 6 2A 10 1B0 4 5 1B0 7 9 VCC 8 1A S2 S1 5 GND Figure 3. Pin Assignment 10-Pin UMLP (Top-Through View) Figure 4. 10-Lead MicroPak™ Pin Descriptions Pin # UMLP Pin # MicroPak™ Name Description 1 2 1B1 Data Ports 2 3 2B0 Data Ports 3 4 2B1 Data Ports 4 5 GND Ground 5 6 2A Data Ports 6 7 S2 Switch Select Pins 7 8 S1 Switch Select Pins 8 9 1A Data Ports 9 10 VCC Supply Voltage 10 1 1B0 Data Ports Truth Table Control Input, Sn Function LOW Logic Level nB0 connected to nA (FSA2268/2268T); nB1 terminated to GND (FSA2268T only) HIGH Logic Level nB1 connected to nA (FSA2268/2268T); nB0 terminated to GND (FSA2268T only) www.onsemi.com 2 FSA2268 / FSA2268T — Low-Voltage Dual-SPDT (0.4) Analog Switch with 16kV ESD Pin Configuration Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Parameter VCC Min. Supply Voltage 1B0, 1B1, 2B0, 2B1, 1A, 2A Pins (1) Max. Units -0.5 5.5 V -0.5 VCC + 0.3 0 1.4 VSW Switch I/O Voltage VIN Control Input Voltage 5.5 V IIK Input Clamp Diode Current -50 mA ISW Switch I/O Current (Continuous) 350 mA Peak Switch Current (Pulsed at 1ms Duration, 50 MHz Figure 11 THD Total Harmonic Distortion f=20Hz to 20kHz, 1.65 to 4.30 RL=32, VIN=2Vpp .06 % Figure 17 Q Capacitance Symbol Parameter Conditions VCC (V) TA=+25ºC Min. Typ. Unit Figure Max. CIN Control Pin Input Capacitance f=1MHz 0 1.5 pF Figure 15 COFF B Port Off Capacitance f=1MHz 3.3 30 pF Figure 15 CON A Port On Capacitance f=1MHz 3.3 120 pF Figure 16 www.onsemi.com 6 FSA2268 / FSA2268T — Low-Voltage Dual-SPDT (0.4) Analog Switch with 16kV ESD AC Electrical Characteristics VON I A(OFF) NC A nBn nA V IN V IN Select I ON GND Select R ON = VON / ION Figure 5. V Sel = GND VSel = GND 0 or Vcc **Each switch port is tested separately. On Resistance Figure 6. Off Leakage (Ports tested separately) nBn I A(ON) NC 0 orVcc nA V IN A GND RS V IN CL RL GND Select GND VSel = Figure 7. V Sel 0 or Vcc GND On Leakage Figure 8. tRISE = 2.5ns tFALL = 2.5ns VCC 90% Input - VSel 10% GND 90% VCC /2 VCC /2 10% VOH 90% 90% Output - VOUT VOL Figure 9. tON tOFF Turn-On / Turn-Off Waveforms www.onsemi.com 7 Test Circuit Load V OUT FSA2268 / FSA2268T — Low-Voltage Dual-SPDT (0.4) Analog Switch with 16kV ESD Test Diagrams tRISE = 2.5ns nB n nA Vcc V IN GND V OUT CL V IN 90% V cc/2 Input - VSel RL 10% 0V GND GND V OUT RS 0.9*V out 0.9*V out V Sel GND tD RL and CL are functions of the application environment (50, 75, or 100 ). CL includes test fixture and stray capacitance. Figure 10. Break-Before-Make Interval Timing Network Analyzer RS V IN VS GND GND VSel GND VOU T GND RT R L and CL are functions of the application environment (50, 75, or 100 ). L C L includes test fixture and stray capacitance. Figure 11. GND Bandwidth Network Analyzer RS RT VSel VS GND GND GND VOUT GND GND RS and RT are functions of the application environment (50, 75, or 100 ). RT GND Off-Isolation = 20 Log (VOUT / VIN ) Figure 12. Channel Off Isolation www.onsemi.com 8 FSA2268 / FSA2268T — Low-Voltage Dual-SPDT (0.4) Analog Switch with 16kV ESD Test Diagrams (Continued) Network Analyzer RS VIN VS GND GND VSel GND GND RT V OUT RT GND GND RS and RT are functions of the application CROSSTALK = 20 Log (VOUT / VIN ) environment (50, 75, or 100 ). Figure 13. Adjacent Channel Crosstalk Figure 14. Charge Injection Test nSn Capacitance Meter f = 1MHz Figure 15. nBn Capacitance Meter nBn VSel = 0 or Vcc nSn V Sel = f = 1MHz 0 orV cc nBn nBn Channel Off Capacitance Figure 16. Channel On Capacitance Audio Analyzer RS V IN VS GND GND V CNTRL GND VSel = 0 or Vcc GND V OUT RT GND RS and RT are functions of the application environment (see AC Tables for specific values). Figure 17. Total Harmonic Distortion www.onsemi.com 9 FSA2268 / FSA2268T — Low-Voltage Dual-SPDT (0.4) Analog Switch with 16kV ESD Test Diagrams (Continued) 1.40 0.15 C A 1.70 B 2X (9X) 0.563 0.663 1 2.10 1.80 PIN#1 IDENT 0.40 0.15 C TOP VIEW 0.10 C 0.55 MAX. (10X) 0.225 2X RECOMMENDED LAND PATTERN 0.152 1.45 0.08 C 0.55 SEATING C PLANE 0.05 SIDE VIEW 9X 0.45 0.40 1.85 0.35 (9X) 0.45 3 (10X) 0.225 6 DETAIL A OPTIONAL MINIMIAL TOE LAND PATTERN 0.40 1 NOTES: PIN#1 IDENT 0.15 (10X) 0.25 10 BOTTOM VIEW 0.55 0.45 0.10 C A B 0.05 C 0.10 A. PACKAGE DOES NOT FULLY CONFORM TO JEDEC STANDARD. B. DIMENSIONS ARE IN MILLIMETERS. C. DIMENSIONS AND TOLERANCES PER ASME Y14.5M, 1994. D. LAND PATTERN RECOMMENDATION IS BASED ON FSC DESIGN ONLY. E. DRAWING FILENAME: MKT-UMLP10Arev3. 0.10 0.10 DETAIL A SCALE : 2X PACKAGE EDGE LEAD OPTION 1 SCALE : 2X Figure 18. LEAD OPTION 2 SCALE : 2X 10-Lead Quad Ultrathin Molded Leadless Package (UMLP) Package drawings are provided as a service to customers considering ON Semiconductor components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a ON Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of ON Semiconductor’s worldwide terms and conditions, specifically the warranty therein, which covers ON Semiconductor products. www.onsemi.com 10 FSA2268 / FSA2268T — Low-Voltage Dual-SPDT (0.4) Analog Switch with 16kV ESD Physical Dimensions 0.10 C 2.10 2X A 1.62 B KEEPOUT ZONE, NO TRACES OR VIAS ALLOWED (0.11) 0.56 1.12 1.60 PIN1 IDENT IS 2X LONGER THAN OTHER LINES 0.10 C 2X TOP VIEW (0.35) 10X (0.25) 10X 0.50 RECOMMENDED LAND PATTERN 0.55 MAX 0.05 C 0.05 C 0.05 0.00 (0.20) C 0.35 0.25 SIDE VIEW (0.15) D 0.65 0.55 DETAIL A 0.35 0.25 (0.36) 0.35 0.25 DETAIL A 2X SCALE 4 1 0.56 5 10 (0.29) 0.35 9X 0.25 6 9 0.50 0.25 9X 0.15 1.62 0.10 0.05 C A B C ALL FEATURES BOTTOM VIEW Figure 19. NOTES: A. PACKAGE CONFORMS TO JEDEC REGISTRATION MO-255, VARIATION UABD . B. DIMENSIONS ARE IN MILLIMETERS. C. DIMENSIONS AND TOLERANCES PER ASME Y14.5M, 1994. D. PRESENCE OF CENTER PAD IS PACKAGE SUPPLIER DEPENDENT. IF PRESENT IT IS NOT INTENDED TO BE SOLDERED AND HAS A BLACK OXIDE FINISH. E. DRAWING FILENAME: MKT-MAC10Arev5. 10-Lead, MicroPak™, 1.6mm Wide Package drawings are provided as a service to customers considering ON Semiconductor components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a ON Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of ON Semiconductor’s worldwide terms and conditions, specifically the warranty therein, which covers ON Semiconductor products. www.onsemi.com 11 FSA2268 / FSA2268T — Low-Voltage Dual-SPDT (0.4) Analog Switch with 16kV ESD Physical Dimensions (Continued) ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com ❖ © Semiconductor Components Industries, LLC N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com