FSA6157L6X

Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. FSA6157 Low-RON SPDT (0.8Ω) Negative-Swing Audio or Video Switch Features Description ƒ ƒ ƒ ƒ The FSA6157 is a high-performance, Single Pole Double Throw (SPDT) analog switch that features a low RON of 0.8Ω (typical) at 2.7V supply. The FSA6157 operates over a wide VCC range of 1.65V to 4.3V and is designed for break-before-make operation. The select input is TTLlevel compatible. 0.8Ω Typical On Resistance (RON) for +2.7V Supply 0.45Ω Maximum RON Flatness for +2.7V Supply -3db Bandwidth: > 50MHz Low ICCT Current Over an Expanded Control Input Range ƒ Packaged in Pb-free 6-Lead MicroPak™ (1.0 x 1.4mm) ƒ ƒ ƒ Power-Off Protection on All I/O Ports ƒ Broad VCC Operating Range: 1.65 to 4.3V HBM JEDEC: JESD22-A114 - I/O to GND: 12kV Power to GND: 16kV IMPORTANT NOTE: For additional performance information, please contact analogswitch@fairchildsemi.com. Applications ƒ ƒ The FSA6157 features very low quiescent current even when the control voltage is lower than the VCC supply. This feature suits mobile handset applications by allowing direct interface with baseband processor general-purpose I/Os with minimal battery consumption. Cell Phone, PDA, Digital Camera, and Notebook LCD Monitor, TV, and Set-top Box Ordering Information Part Number Top Mark FSA6157L6X GT Package Description Eco Status Green 6-Lead, MicroPak™, 1.0mm wide, JEDEC MO-255 For Fairchild’s definition of Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html. Analog Symbol B0 B1 A S Figure 1. © 2007 Fairchild Semiconductor Corporation FSA6157 / FSA6157T • Rev. 1.0.2 FSA6157 www.fairchildsemi.com FSA6157 — Low-RON SPDT (0.8Ω) Negative-Swing Audio or Video Switch August 2009 FSA6157 — Low-RON SPDT (0.8Ω) Negative Swing Switch with 16kV ESD Pin Assignments Figure 2. Pin Assignments for 6-Lead MicroPak™ Pin Descriptions Name Description A, B0, B1 Data Ports S Switch Select Pin Truth Table Control Input, S Function LOW B0 connected to A HIGH B1 connected to A © 2007 Fairchild Semiconductor Corporation FSA6157/6157T Rev. 1.0.2 www.fairchildsemi.com 2 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Parameter VCC Supply Voltage VSW Switch I/O Voltage (1) B0, B1, A Pins VSW-SW Switch I/O to Switch I/O Voltage Delta (1) (Off State) VCNTRL Control Input Voltage Min. Max. Units -0.5 4.6 V VCC – 5.5V 4.6 V 5.5 V 4.6 V -50 mA B0, B1, A Pins (1) S -0.5 IIK Input Clamp Diode Current ISW Switch I/O Current (Continuous) 350 mA Peak Switch Current (Pulsed at 1ms Duration, 50 MHz Figure 9 THD Total Harmonic Distortion f=20Hz to 20kHz, RL=32Ω, VIN=2VPP 1.65 to 4.30 0.1 % Figure 15 SNR Signal to Noise Ratio f=1kHz, RL=32Ω, VIN=0dBmw, VBIAS=0V 4.30 -70 dB Capacitance TA=+25ºC Symbol Parameter Conditions VCC (V) Min. CIN Typ. Unit Figure pF Figure 13 Max. Control Pin Input Capacitance f=1MHz 0 COFF B Port Off Capacitance f=1MHz 3.30 30 pF Figure 13 CON A Port On Capacitance f=1MHz 3.30 150 pF Figure 14 © 2007 Fairchild Semiconductor Corporation FSA6157/6157T Rev. 1.0.2 3 www.fairchildsemi.com 5 FSA6157 — Low-RON SPDT (0.8Ω) Negative Swing Switch with 16kV ESD AC Electrical Characteristics V ON B0,B1 A GND V IN GND Select VS = 0 or VCC / ION Figure 3. A I ON Select RON = VON I A(OFF) NC V SW GND VS = 0 or Vcc On Resistance Figure 4. Off Leakage (Ports Tested Separately) nBn nA I A(ON) NC V IN A GND RS VS =0 or Vcc Figure 5. RL V OUT GND V IN Select CL V Sel GND GND On Leakage Figure 6. tRISE = 2.5ns Test Circuit Load tFALL = 2.5ns VCC Input - V Sel 10% GND VOH Output-- V OUT VOL Figure 7. © 2007 Fairchild Semiconductor Corporation FSA6157/6157T Rev. 1.0.2 90% 90% VCC /2 VCC /2 90% tON 10% 90% tOFF Turn-On / Turn-Off Waveforms www.fairchildsemi.com 6 FSA6157 — Low-RON SPDT (0.8Ω) Negative Swing Switch with 16kV ESD Test Diagrams tRISE=2.5ns VCC 90% B0nB1 Input - VSel nA VSW GND CL VIN RL 0V VOUT 10% VOUT GND GND VCC/2 0.9*VOUT 0.9*VOUT RS tD V Sel GND RL and CL are functions of the application environment (50, 75, or 100 ). CL includes test fixture and stray capacitance. Figure 8. Break-Before-Make Interval Timing Network Analyzer RS GND V IN VS GND VS GND V OUT GND RT GND RS and RT are functions of the application environment (50, 75, or 100 ). Figure 9. Bandwidth Network Analyzer RS V Sel VS GND RT GND GND V OUT GND GND RS and RT are functions of the application environment (50, 75, or 100 ). RT GND Off Isolation= 20 Log (V OUT / V IN) Figure 10. © 2007 Fairchild Semiconductor Corporation FSA6157/6157T Rev. 1.0.2 Channel Off Isolation www.fairchildsemi.com 7 FSA6157 — Low-RON SPDT (0.8Ω) Negative Swing Switch with 16kV ESD Test Diagrams (Continued) Network Analyzer RS V IN GND VS GND VSel GND GND RT GND GND RS and RT are functions of the application environment (50, 75, or 100 ). Figure 11. Crosstalk = 20 Log (VOUT / VIN) Adjacent Channel Crosstalk Generator VCC B RS VS VOUT RT VIN Input – VSEL mA nSn On Off 0V VOUT CL GND Off ΔVOUT GND VOUT VSEL CL includes test fixture and stray capacitance GND Figure 12. Charge Injection Test B0,B1 nBn Select f=1MHz VS = 0 or VCC f=1MHz Figure 13. Capacitance Meter Select Capacitance Meter Q = ΔVOUT • CL VS = 0 or VCC nBn B0nB1 Channel Off Capacitance Figure 14. Channel On Capacitance Audio Analyzer RS GND VIN VS GND VCNTRL GND VCNTRL = 0 or Vcc GND GND RS and RT are functions of the application environment. Figure 15. © 2007 Fairchild Semiconductor Corporation FSA6157/6157T Rev. 1.0.2 VOUT RT Total Harmonic Distortion www.fairchildsemi.com 8 FSA6157 — Low-RON SPDT (0.8Ω) Negative Swing Switch with 16kV ESD Test Diagrams (Continued) 2X 0.05 C 1.45 B 2X (1) 0.05 C (0.49) 5X 1.00 (0.75) (0.52) 1X A TOP VIEW 0.55MAX (0.30) 6X PIN 1 0.05 C 0.05 0.00 RECOMMENED LAND PATTERN 0.05 C C DETAIL A 0.25 6X 0.15 1.0 0.10 0.05 0.45 0.35 0.10 0.00 6X C B A C 0.40 0.30 0.35 5X 0.25 0.40 5X 0.30 (0.05) 6X Notes: 0.5 BOTTOM VIEW (0.13) 4X 0.075 X 45 CHAMFER DETAIL A PIN 1 TERMINAL 1. CONFORMS TO JEDEC STANDARD M0-252 VARIATION UAAD 2. DIMENSIONS ARE IN MILLIMETERS 3. DRAWING CONFORMS TO ASME Y14.5M-1994 MAC06AREVC Figure 16. 6-Lead MicroPak™, 1.0mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/. For current tape and reel specifications, visit Fairchild Semiconductor’s online packaging area: http://www.fairchildsemi.com/products/logic/pdf/micropak_tr.pdf. © 2007 Fairchild Semiconductor Corporation FSA6157/6157T Rev. 1.0.2 www.fairchildsemi.com 9 FSA6157 — Low-RON SPDT (0.8Ω) Negative Swing Switch with 16kV ESD Physical Dimensions FSA6157 — Low-RON SPDT (0.8Ω) Negative Swing Switch with 16kV ESD © 2007 Fairchild Semiconductor Corporation FSA6157/6157T Rev. 1.0.2 www.fairchildsemi.com 10 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com © Semiconductor Components Industries, LLC N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com