FSA646UCX

ON Semiconductor Is Now To learn more about onsemi™, please visit our website at www.onsemi.com onsemi and       and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as-is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Other names and brands may be claimed as the property of others. FSA646 2:1 MIPI D-PHY (2.5Gbps) 4-Data Lane & C-PHY (2.5Gsps) 3-Data Lane Switch www.onsemi.com Description The FSA646 is a four−data−lane D−PHY or three−data−lane C−PHY, MIPI switch. This single−pole, double−throw (SPDT) switch is optimized for switching between two high−speed or low−power MIPI sources. The FSA646 is designed for the MIPI specification and allows connection to a SCI or DSI module. (Bottom View) Features • Switch Type: SPDT (10x) • Signal Types: ♦ WLCSP36, 2.43x2.43x0.4 CASE 567WJ MIPI, D−PHY & C−PHY • VCC: 1.5 to 5.0 V • Input Signals: 0 to 1.3 V • RON: MARKING DIAGRAM GSKK XYZ 6 W Typical HS MIPI ♦ 6 W Typical LP MIPI DRON: 0.1 W Typical LP & HS MIPI DRON_FLAT: 0.9 W Typical LP & HS MIPI ICCZ: 1 mA Maximum ICC: 32 mA Typical OIRR: −24 dB Typical Bandwidth: 4.1 GHz Typical Xtalk: −30 dB Typical CON: 1.5 pF Typical Skew (P), Skew (O): 6 ps Typical This is a Pb−Free Device ♦ • • • • • • • • • • GS KK X Y Z = Specific Device Code = Assembly Lot = Year = Work Week = Assembly Location ORDERING INFORMATION See detailed ordering and shipping information on page 7 of this data sheet. Applications • • • • Cellular Phones, Smart Phones Tablets Laptops Displays © Semiconductor Components Industries, LLC, 2017 October, 2018 − Rev. 1 1 Publication Order Number: FSA646/D FSA646 Figure 1. Typical D−PHY Application PIN DESCRIPTIONS Figure 2. Analog Symbol www.onsemi.com 2 FSA646 PIN DEFINITIONS Figure 3. Top Through View Figure 4. Recommended C−PHY Configuration www.onsemi.com 3 FSA646 Table 1. BALL−TO−PIN MAPPINGS Ball Pin Name Ball Pin Name Ball Pin Name A1 VCC C1 DB3N E1 DB1N A2 GND C2 DB3P E2 DB1P A3 DA4N C3 NC E3 DA1N A4 DA4P C4 NC E4 DA1P A5 /OE C5 D3N E5 D1N A6 SEL C6 D3P E6 D1P B1 DB4N D1 DB2N F1 CLKBN B2 DB4P D2 DB2P F2 CLKBP B3 DA3N D3 DA2N F3 CLKAN B4 DA3P D4 DA2P F4 CLKAP B5 D4N D5 D2N F5 CLKN B6 D4P D6 D2P F6 CLKP TRUTH TABLE SEL /OE Function LOW LOW CLKP = CLKAP, CLKN = CLKAN, Dn(P/N) = DAn(P/N) HIGH LOW CLKP = CLKBP, CLKN = CLKBN, Dn(P/N) = DBn(P/N) X HIGH Clock and Data Ports High Impedance ABSOLUTE MAXIMUM RATINGS Symbol VCC VCNTRL Parameter Min. Max. Unit −0.5 6.0 V (Note 1) −0.5 VCC V (Note 1,2) −0.3 1.8 V Supply Voltage DC Input Voltage (/OE, SEL) VSW DC Switch I/O Voltage IIK DC Input Diode Current −50 IOUT DC Output Current TSTG Storage Temperature ESD Human Body Model, JEDEC: JESD22−A114 −65 All Pins 25 mA +150 °C kV 2.0 Charged Device Model, JEDEC: JESD22−C101 IEC 61000−4−2 System mA 1.0 Contact 8.0 Air Gap 15.0 Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. The input and output negative ratings may be exceeded if the input and output diode current ratings are observed. 2. VSW refers to analog data switch paths. RECOMMENDED OPERATING CONDITIONS Symbol VCC VCNTRL VSW TA Parameter Min. Max. Unit 1.5 5.0 V 0 VCC V −HS Mode 0 0.3 V −LS Mode 0 1.3 V −40 +85 °C Supply Voltage Control Input Voltage (SEL, /OE) Switch I/O Voltage (CLKn, Dn, CLKAn, CLKBn, Dan, DBn) (Note 3) Operating Temperature Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond the Recommended Operating Ranges limits may affect device reliability. 3. The control inputs must be held HIGH or LOW; they must no float. www.onsemi.com 4 FSA646 DC AND TRANSIENT CHARACTERISTICS (TA = 25°C unless otherwise specified) TA = −40 to +855C Symbol Parameter Conditions VCC (V) Min. 1.5 −1.2 1.3 VIK Clamp Diode Voltage (/OE, SEL) IIN = −18 mA VIH Input Voltage High SEL, /OE 1.5 to 5 VIL Input Voltage Low SEL, /OE 1.5 to 5 IIN Control Input Leakage (/OE, SEL) VCNTRL = 0 to VCC 5 Off Leakage Current of Port CLKAn, Dan, CLKBn and DBn VSW = 0.0 ≤ DATA ≤ 1.3 V ON Leakage Current of Common Ports (CLKn, Dn) IOFF IOZ INO(OFF) INC(OFF) IA(ON) RON_MIPI_HS Typ. Max. Unit −0.6 V V 0.5 V −0.5 0.5 mA 5 −0.5 0.5 mA VSW = 0.0 ≤ DATA ≤ 1.3 V 5 −0.5 0.5 mA Power−Off Leakage Current (All I/O Ports) VSW = 0.0 or 1.3 V 0 −0.5 0.5 mA Off−State Leakage VSW = 0.0 ≤ DATA ≤ 1.3 V /OE = High 5 −0.5 0.5 mA Switch On Resistance for HS MIPI Applications (Note 4) ION = −8 mA, /OE = 0 V, SEL = VCC or 0 V, CLKA, CLKB, DBN or DAN = 0.2 V 1.5 6 W 6 W 0.1 W 0.1 W 0.9 W 0.9 W 2.5 3.3 5 RON_MIPI_LP Switch On Resistance for LP MIPI Applications (Note 4) ION = −8 mA, /OE = 0 V, SEL = VCC or 0 V, CLKA, CLKB, DBN or DAN = 1.2 V 1.5 2.5 3.3 5 DRON_MIPI_HS On Resistance Matching Between HS MIPI Channels (Note 4) ION = −8 mA, /OE = 0 V, SEL = VCC or 0 V, CLKA, CLKB, DBN or DAN = 0.2 V 1.5 2.5 3.3 5 DRON_MIPI_LP On Resistance Matching Between LP MIPI Channels (Note 4) ION = −8 mA, /OE = 0 V, SEL = VCC or 0 V, CLKA, CLKB, DBN or DAN = 1.2 V 1.5 2.5 3.3 5 RON_FLAT_MIPI_HS On Resistance Flatness for HS MIPI Signals (Note 4) ION = −8 mA, /OE = 0 V, SEL = VCC or 0 V, CLKA, CLKB, DBN or DAN = 0 to 0.3 V 1.5 ION = −8 mA, /OE = 0 V, SEL = VCC or 0 V, CLKA, CLKB, DBN or DAN = 0 to 1.3 V 1.5 2.5 3.3 5 RON_FLAT_MIPI_LP On Resistance Flatness for LP MIPI Signals (Note 4) 2.5 3.3 5 ICC Quiescent Supply Current (Includes Change Pump) VSEL = 0 or VCC, IOUT = 0, /OE = 0 V www.onsemi.com 5 5 30 mA FSA646 DC AND TRANSIENT CHARACTERISTICS (TA = 25°C unless otherwise specified) (continued) TA = −40 to +855C Symbol Parameter ICCZ Quiescent Supply Current (High Impedance) VSEL = 0 or VCC, IOUT = 0, /OE = 0 V 5 ICCT Increase in ICC Current Per Control Voltage and VCC VSEL = 0 or VCC, /OE = 1.5 V 5 Conditions VCC (V) Min. Typ. Max. Unit 1 mA 1 mA 4. Measured by the voltage drop between A and B pins at the indicated current through the switch. On resistance is determined by the lower of the voltage on the two (A or B ports). AC ELECTRICAL CHARACTERISTICS (VCC = 3.3 V and TA = 25°C unless otherwise specified) TA = −40 to +855C Symbol Parameter Conditions VCC (V) Min. Typ. Max. Unit tINIT Initialization Time VCC to Output (Note 5) RL = 50 W, CL = 0 pF, VSW = 0.6 V 1.5 to 5 60 tEN Enable Time /OE to Output RL = 50 W, CL = 0 pF, VSW = 0.6 V 1.5 to 5 60 150 ms tDIS Disable Time /OE to Output RL = 50 W, CL = 0 pF, VSW = 0.6 V 1.5 to 5 35 250 ns tON Turn−On Time SEL to Output RL = 50 W, CL = 0 pF, VSW = 0.6 V 1.5 to 5 350 1100 ns tOFF Turn−Off Time SEL to Output RL = 50 W, CL = 0 pF, VSW = 0.6 V 1.5 to 5 125 800 ns tBBM Break−Before−Make Time RL = 50 W, CL = 0 pF, VSW = 0.6 V 1.5 to 5 50 450 ns Propagation Delay (Note 5) CL = 0 pF, RL = 50 W 1.5 to 5 30 100 ps OIRR Off Isolation for MIPI (Note 5) RL = 50 W, f = 1250 MHz, /OE = HIGH, VSW = 0.2 VPP 1.5 to 5 −24 XTALK Crosstalk for MIPI (Note 5) RL = 50 W, f = 1250 MHz, SEL = High, VSW = 0.2 VPP 1.5 to 5 −30 −25 −30 −25 tPD RL = 50 W, f = 1250 MHz, SEL = Low, VSW = 0.2 VPP BW −3 db Bandwidth (Note 5) RL = 50 W, CL = 0 pF, VSW = 0.2 VPP 1.5 to 5 IL Insertion Loss at 750 MHz (Note 5) RL = 50 W, CL = 0 pF, VSW = 0.2 VPP 1.5 to 5 2.5 67 ms dB dB 4.1 GHz −0.7 dB 5. Guaranteed by characterization. HIGH−SPEED−RELATED AC ELECTRICAL CHARACTERISTICS TA = −40 to +855C Conditions Typ. Max. Parameter tSK(P) HS Mode Skew of Opposite Transitions of the Same Output (Note 6) RL = 50 W, CL = 0 pF, VSW = 0.3 V 1.5 to 5 6 ps tSK(O) HS Mode Skew of Channel−to−Channel Single−Ended Skew (Note 6) RL = 50 W, CL = 0 pF, VSW = 0.3 V 1.5 to 5 6 ps 6. Guaranteed by characterization. www.onsemi.com 6 VCC (V) Min. Symbol Unit FSA646 CAPACITANCE TA = −40 to +855C Min. Conditions Typ. Symbol Parameter CIN Control Pin Input Capacitance (Note 7) VCC = 0 V, f = 1 MHz 2.1 CON On Capacitance (Note 7) VCC = 3.3 V, /OE = 0 V, f = 1250 MHz (in HS common value) 1.5 COFF On Capacitance (Note 7) VCC and /OE = 3.3 V, f = 1250 MHz (both sides in HS common value) 0.9 Max. pF 7. Guaranteed by characterization. The table below pertains to the Packaging information on the following page. ORDERING INFORMATION Part Number Top Marking Package Top Mark FSA646UCX −40 to +85°C 36−Ball WLCSP, Non−JEDEC 2.43 x 2.43 mm, 0.4 mm Pitch GS www.onsemi.com 7 Unit MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS WLCSP36 2.43x2.43x0.488 CASE 567WJ ISSUE A DOCUMENT NUMBER: DESCRIPTION: 98AON87484G WLCSP36 2.43x2.43x0.488 DATE 03 OCT 2018 Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2018 www.onsemi.com ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com ◊ TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 www.onsemi.com 1 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative