Is Now Part of
To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
FSAV330 — 4-Channel, 2:1 Video Switch
Features
Description
The FSAV330 video switch is a quad, single-pole /
double-throw, high-speed CMOS TTL-compatible video
switch. The low on resistance of the switch allows
inputs to be connected to outputs without adding
propagation delay or generating additional ground
bounce noise.
Replacement for the P15V330
Wide Bandwidth: 300MHz
4Ω Switch Connection between Two Ports
Minimal Propagation Delay through the Switch
Low lCC
Zero Bounce in Flow-through Mode
Control Inputs Compatible with TTL Level
When /OE is LOW, the select pin connects the A port to
the selected B port output. When /OE is HIGH, the
switch is OPEN and a high-impedance state exists
between the two ports.
Applications
Set-Top Boxes
Flat Panel Displays
CRT Displays
DVD - RW
Ordering Information
Operating
Temperature Range
Package
Packing
Method
FSAV330MX
-40 to +85°C
16-Lead, Small Outline Integrated Circuit (SOIC),
JEDEC MS-012, 0.150 inch Narrow
Tape and Reel
FSAV330MTCX
-40 to +85°C
16-, Thin Shrink Small Outline Package
(TSSOP), JEDEC MO-153, 4.4mm Wide
Tape and Reel
FSAV330QSCX
-40 to +85°C
16-Lead, Quarter Size Outline Package (QSOP),
JEDEC MO-137, 0.150 inch Wide
Tape and Reel
Part Number
The Fairchild switch family derives from and embodies Fairchild’s proven switch technology used for several years in its
74LVX3L384 (FST3384) bus switch product.
© 2002 Fairchild Semiconductor Corporation
FSAV330 • Rev. 1.0.4
www.fairchildsemi.com
FAV330 — 4-Channel, 2:1 Video Switch
September 2010
Figure 1. Logic Diagram
S
1
16
VCC
1B1
2
15
/OE
1B2
3
14
4B1
1A
4
13
4B2
2B1
5
12
4A
2B2
6
11
3B1
2A
7
10
3B2
GND
8
9
3A
FSAV330 — 4-Channel, 2:1 Video Switch
Pin Configurations
Figure 2. Pin Assignments
Pin Descriptions
Pin #
Name
15
/OE
Description
Bus Switch Enabled
1
S
Select Input
4,7,9,12
A
Bus A
2,3,5,6,10,11,13,14
B1-B2
Bus B
8
GND
Ground
16
VCC
Supply Voltage
S
/OE
Function
Don’t Care
HIGH
Disconnected
LOW
LOW
A=B1
HIGH
LOW
A=B2
Truth Table
© 2002 Fairchild Semiconductor Corporation
FSAV330 • Rev. 1.0.4
www.fairchildsemi.com
2
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device
reliability. The absolute maximum ratings are stress ratings only.
Symbol
Parameter
VCC
Supply Voltage
Min.
Max.
Unit
-0.5
+7.0
V
VS
DC Switch Voltage
-0.5
+7.0
V
VIN
DC Input Voltage
(1)
-0.5
+7.0
V
IIK
DC Input Diode Current
IOUT
DC Output Sink Current
128
mA
DC VCC / GND Current
±100
mA
+150
°C
4000
V
ICC/IGND
-50
TSTG
Storage Temperature Range
ESD
Human Body Model, JESD22-A114
-65
mA
Note:
1. The input and output negative voltage ratings may be exceeded if the input and output diode current ratings are
observed.
FSAV330 — 4-Channel, 2:1 Video Switch
Absolute Maximum Ratings
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to Absolute Maximum Ratings.
Symbol
Parameter
Min.
Max.
Unit
VCC
Power Supply
4.0
5.5
V
VIN
Input Voltage
0
5.5
V
VOUT
Output Voltage
0
5.5
V
tr , tf
Input Rise and Fall Time
Switch Control Input
0
5
Switch I/O
0
DC
TA
Operating Temperature, Free Air
-40
+85
ns/V
°C
Note:
2. Unused control inputs must be held HIGH or LOW; they may not float.
© 2002 Fairchild Semiconductor Corporation
FSAV330 • Rev. 1.0.4
www.fairchildsemi.com
3
Typical values are at VCC=5.0V and TA= +25°C. Minimum and maximum values are at TA= -40 to +85°C.
Symbol
VANALOG
VIK
VIH
VIL
II
IOZ
Parameter
Conditions
Analog Signal Range
Clamp Diode Voltage
High-Level Input Voltage
Low-Level Input Voltage
Input Leakage Current
Off-State Leakage Current
0 ≤ VIN ≤ 5.5V
0 ≤ A, B ≤ VCC
VIN=1.0V, RI=75Ω, ION=13mA
VIN=2.0V, RI=75Ω, ION=26mA
VIN=VCC or GND, IOUT=0
One Input at 3.4V
Other Inputs at VCC or GND
(3)
RON
Switch On Resistance
ICC
Quiescent Supply Current
ΔICC
IIN=-18mA
Increase in ICC per Input
VCC (V)
Min.
5.0
4.5
4.0 to 5.5
4.0 to 5.5
5.5
5.5
4.5
4.5
5.5
0
Typ.
Max.
Units
2
-1.2
V
V
V
V
µA
µA
2.0
0.8
±1.0
±1.0
7
10
3
3
7
5.5
Ω
µA
2.5
mA
Note:
3. Measured by the voltage drop between the A and B pins at the indicated current through the switch. On
resistance is determined by the lower of the voltages on the A or B pins.
FSAV330 — 4-Channel, 2:1 Video Switch
DC Electrical Characteristics
AC Electrical Characteristics
TA=-40 to +85°C, CL=50pF, RU=RD=500Ω.
Symbol
tPZH, tPZL
tPHZ, tPLZ
BW
Parameter
Output Enable Time,
Select to Bus B
Output Enable Time,
/OE to Bus A, B
Output Disable Time,
Select to Bus B
Output Disable Time,
Output Enable Time
/OE to Bus A, B
-3dB Bandwidth
XTALK
(4)
Crosstalk
DG
Differential Gain
DP
Differential Phase
OIRR
Conditions
Off Isolation
VCC=4.5 – 5.5V
Min. Typ. Max.
5.2
VI=7V for tPZL
VI=Open for tPZH
VI=7V for tPLZ
VI=Open for tPHZ
RL=150Ω, TA=25°C
VCC=4.0V
Min. Max.
Figure
ns
Figure 3
Figure 4
ns
Figure 3
Figure 4
5.7
5.1
5.6
5.2
5.5
5.5
Units
5.5
300
MHz
RIN=10Ω,
RL=150Ω, f=10MHz
RL=150Ω,
f=3.58MHz
RL=150Ω,
f=3.58MHz
-58
dB
0.64
%
0.1
°
RL=150Ω, f=10MHz
-60
dB
Note:
4. This parameter is guaranteed by device characterization, not production tested.
Capacitance
TA=+25°C, f=1MHz. Capacitance is characterized, not production tested.
Symbol
CI/O
CIN
A Port
B Port
CON
Parameter
Conditions
Control Pin Input Capacitance
VCC=5.0V
Input / Output Capacitance
VCC, /OE=5.0V
Switch On Capacitance
VCC=5.0V, /OE=0V
© 2002 Fairchild Semiconductor Corporation
FSAV330 • Rev. 1.0.4
Typ.
Units
3
7
pF
5
12
pF
pF
www.fairchildsemi.com
4
Notes:
5. Input drive by 50Ω source terminated in 50Ω.
6. CL includes load and stray capacitance.
7. Input PRR=1.0MHz, tW =500ns.
Figure 3. AC Test Circuit
FSAV330 — 4-Channel, 2:1 Video Switch
AC Loadings and Waveforms
Figure 4. AC Waveforms
© 2002 Fairchild Semiconductor Corporation
FSAV330 • Rev. 1.0.4
www.fairchildsemi.com
5
10.00
9.80
A
8.89
16
9
B
4.00
3.80
6.00
PIN ONE
INDICATOR
1.75
1
5.6
8
0.51
0.35
1.27
(0.30)
0.25
M
1.27
C B A
0.65
LAND PATTERN RECOMMENDATION
1.75 MAX
1.50
1.25
FSAV330 — 4-Channel, 2:1 Video Switch
Physical Dimensions
SEE DETAIL A
0.25
0.10
C
0.25
0.19
0.10 C
0.50
0.25 X 45°
NOTES: UNLESS OTHERWISE SPECIFIED
(R0.10)
GAGE PLANE
(R0.10)
8°
0°
0.36
A) THIS PACKAGE CONFORMS TO JEDEC
MS-012, VARIATION AC, ISSUE C.
B) ALL DIMENSIONS ARE IN MILLIMETERS.
C) DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD
FLASH AND TIE BAR PROTRUSIONS
D) CONFORMS TO ASME Y14.5M-1994
E) LANDPATTERN STANDARD: SOIC127P600X175-16AM
F) DRAWING FILE NAME: M16AREV12.
SEATING PLANE
0.90
0.50
(1.04)
DETAIL A
SCALE: 2:1
Figure 5. 16-Lead, Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150-inch Narrow
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify
or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically
the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/
© 2002 Fairchild Semiconductor Corporation
FSAV330 • Rev. 1.0.4
www.fairchildsemi.com
6
FSAV330 — 4-Channel, 2:1 Video Switch
Physical Dimensions
LAND PATTERN
RECOMMENDATION
TOP VIEW
END VIEW
SIDE VIEW
DETAIL A
Figure 6. 16-Lead, Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150-inch Wide
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify
or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically
the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/
© 2002 Fairchild Semiconductor Corporation
FSAV330 • Rev. 1.0.4
www.fairchildsemi.com
7
5.00±0.10
4.55
5.90
4.45 7.35
0.65
4.4±0.1
1.45
FSAV330 — 4-Channel, 2:1 Video Switch
Physical Dimensions
5.00
0.11
12°
MTC16rev4
Figure 7. 16-Lead, Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify
or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically
the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/packaging/
© 2002 Fairchild Semiconductor Corporation
FSAV330 • Rev. 1.0.4
www.fairchildsemi.com
8
FSAV330 — 4-Channel, 2:1 Video Switch
© 2002 Fairchild Semiconductor Corporation
FSAV330 • Rev. 1.0.4
www.fairchildsemi.com
9
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
© Semiconductor Components Industries, LLC
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
1
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
www.onsemi.com