Ultra-Low VF Schottky
Rectifier, 20 A, 150 V
FSV20150V
Features
•
•
•
•
•
•
•
Ultra−Low Forward Voltage Drop
Low Thermal Resistance
Very Low Profile: Typical Height of 1.1 mm
Trench Schottky Technology
Green Molding Compound as per IEC61249 Standard
Non−DAP Option Only
These Devices are Pb−Free, Halogen Free and are RoHS Compliant
www.onsemi.com
Anode 1
3
Cathode
Anode 2
Schottky Rectifier
3
Specifications
ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise noted)
Symbol
Parameter
Value
Unit
VRRM
Peak Repetitive Reverse Voltage
150
V
VRWM
Working Peak Reverse Voltage
150
V
VRMS
RMS Reverse Voltage
106
V
DC Blocking Voltage
150
V
IF(AV)
Average Rectified Peak Forward Surge
Current
20
A
IFSM
Non−Repetitive Peak Forward Surge
Current
270
A
Operating Junction Temperature Range
−55 to +150
°C
Storage Temperature Range
−55 to +150
°C
VR
TJ
TSTG
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
© Semiconductor Components Industries, LLC, 2015
April, 2020 − Rev. 3
1
2
1
TO−277
CASE 340BQ
MARKING DIAGRAM
$Y&Z&3
FSV20150V
$Y
&Z
&3
FSV20150V
= ON Semiconductor Logo
= Assembly Plant Code
= Date Code (Year & Week)
= Specific Device Code
ORDERING INFORMATION
See detailed ordering and shipping information on page 2 of
this data sheet.
Publication Order Number:
FSV20150V/D
FSV20150V
THERMAL CHARACTERISTICS (TA = 25°C unless otherwise noted) (Note 1)
Symbol
Parameter
Minimum
Land Pattern
Maximum
Land Pattern
Unit
RqJA
Junction−to−Ambient Thermal Resistance
100
40
°C/W
ΨJL
Junction−to−Lead Thermal Characteristics, Thermocouple Soldered to Anode
15
12
°C/W
Junction−to−Lead Thermal Characteristics, Thermocouple Soldered to Cathode
6
5
1. The thermal resistances (RqJA & ΨJL) are characterized with device mounted on the following FR4 printed circuit boards, as shown in Figure 1
and Figure 2. PCB size: 76.2 x 114.3 mm. Minimum land pattern size: 4.9 x 4.8 mm (big pattern, x1), 1.4 x 1.52 mm (small pattern, x2).
Maximum land pattern size: 30 x 30 mm (pattern, x2). Force line trace size = 55 mils, sense line trace size = 4 mils.
F
S
F
S
F
S
F
S
F
S
Figure 1. Minimum Land Pattern of 2 oz Copper
Figure 2. Maximum Land Pattern of 2 oz Copper
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
Symbol
BVR
Parameter
Conditions
Min
Typ
Max
Unit
150
−
−
V
Breakdown Voltage
IR = 0.5 mA
VF
Forward Voltage Drop
IF = 20 A
−
−
0.84
V
IR
Reverse Current
VR = 150 V
−
−
30
mA
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
ORDERING INFORMATION
Part Number
Top Mark
Package
Shipping†
FSV20150V
FSV20150V
TO−277 3L
(Pb−Free/Halogen Free)
5000 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
www.onsemi.com
2
FSV20150V
TYPICAL PERFORMANCE CHARACTERISTICS
100
TA = 150°C
10
TA = 125°C
1
TA = 100°C
TA = 75°C
TA = 25°C
0.1
0.01
0.0
TA = 150°C
10
TA = 125°C
1
TA = 100°C
0.1
TA = 75°C
0.01
TA = 25°C
1E−3
0.2
0.4
0.6
0.8
20
1.0
30
40
50
60
70
80
90
100
VF, Forward Voltage (V)
Percent of Rated Reverse Voltage (%)
Figure 3. Typical Forward Characteristics
Figure 4. Typical Reverse Characteristics
3000
25
2500
20
IF, Forward Current (A)
CJ, Junction Capacitance (pF)
IR, Leakage Current (mA)
IF, Forward Current (A)
100
2000
1500
1000
500
15
10
5
0
1
10
0
100
25
50
75
100
125
150
VR, Reverse Bias Voltage (V)
TC, Case Temperature (5C)
Figure 5. Typical Junction Capacitance
Figure 6. Forward Current Derating Curve
www.onsemi.com
3
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
TO−277−3LD
CASE 340BQ
ISSUE O
DOCUMENT NUMBER:
DESCRIPTION:
98AON13861G
TO−277−3LD
DATE 30 SEP 2016
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 1
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
© Semiconductor Components Industries, LLC, 2019
www.onsemi.com
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
◊
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
www.onsemi.com
1
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative
